RNA-seq from ENCODE/UW
Ontology highlight
ABSTRACT:
ORGANISM(S): Mus musculus
PROVIDER: GSE39524 | GEO | 2012/07/20
REPOSITORIES: GEO
Similar Datasets
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track was produced as part of the ENCODE Project. This track displays genome-wide maps of histone modifications in different cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType) using ChIP-seq high-throughput sequencing. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2012-06-07 | GSE35583 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Project. This track displays maps of genome-wide binding of the CTCF transcription factor in different cell lines using ChIP-seq high-throughput sequencing For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-06-29 | GSE30263 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track was produced as part of the mouse ENCODE Project. This track shows RNA-seq measured genome-wide in mouse tissues and cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType). Poly-A selected mRNA was used as the source for transcriptome profiling of tissues and cell types that also had corresponding DNase I hypersensitive profiles. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols. Fresh tissues were harvested from mice and stored until used for preparing total RNA samples. The total RNA was used as starting material to select poly-A RNA and used for constructing SOLiD libraries according to the protocols supplied by the manufacturer. All RNA samples were spiked in with NIST standards before libraries were constructed. The RNA-seq libraries were sequenced on ABI SOLiD sequencing platform as 50-base reads according to the manufacturer's recommendations. Reads were aligned to the mm9 reference genome using ABI BioScope software version 1.2.1. Colorspace FASTQ format files were created using Heng Li's solid2fastq.pl script version 0.1.4 (Li et al., 2009a), representing 0, 1, 2, 3 color codes with the letters A, C, G, T respectively. Signal files were created from the BAM (Li et al., 2009b) alignments using BEDTools (Quinlan et al., 2010).
2012-07-20 | E-GEOD-39524 | biostudies-arrayexpress
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track was produced as part of the ENCODE Project. This track displays genome-wide maps of histone modifications in different cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType) using ChIP-seq high-throughput sequencing. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf Cells were grown according to the approved ENCODE cell culture protocols (http://hgwdev.cse.ucsc.edu/ENCODE/protocols/cell). Cells were cross-linked with 1% formaldehyde, and the reaction was quenched by the addition of glycine. Fixed cells were rinsed with PBS, lysed in nuclei lysis buffer, and the chromatin was sheared to 200-500 bp fragments using a Fisher Dismembrator (model 500). Sheared chromatin fragments were immunoprecipitated with specific polyclonal antibodies at 4 °C with gentle rotation. Antibody-chromatin complexes were washed and eluted. The cross-linking in the immunoprecipitated DNA was reversed and treated with RNase-A. Following proteinase K treatment, the DNA fragments were purified by phenol-chloroform-isoamyl alcohol extraction and ethanol precipitation. A quantity of 20-50 ng of ChIP DNA was end-repaired, followed by the addition of adenine, ligation to Illumina adapters, and creation of a Solexa library for sequencing. ChIP-seq affinity was directly measured through the raw tag density (Raw Signal), which is shown in the track as density of tags mapping within a 150 bp sliding window (at a 20 bp step across the genome). ChIP-seq affinity zones (HotSpots) were identified using the HotSpot algorithm described in Sabo et al. (2004). One percent false discovery rate thresholds (FDR 1.0%) were computed for each cell type by applying the HotSpot algorithm to an equivalent number of random uniquely mapping 36-mers. ChIP-Seq affinities (Peaks) were identified as signal peaks within FDR 1.0% hypersensitive zones using a peak-finding algorithm. All tracks have a False Discovery Rate of 1% (FDR 1.0%). Data were verified by sequencing biological replicates displaying a correlation coefficient > 0.9.
2012-06-07 | E-GEOD-35583 | biostudies-arrayexpress
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Richard Sandstrom mailto:sull@u.washington.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Project. This track shows DNaseI sensitivity measured genome-wide in different cell lines using the Digital DNaseI methodology (see below), and DNaseI hypersensitive sites. DNaseI has long been used to map general chromatin accessibility and DNaseI hypersensitivity is a universal feature of active cis-regulatory sequences. The use of this method has led to the discovery of functional regulatory elements that include enhancers, insulators, promotors, locus control regions and novel elements. For each experiment (cell type) this track shows DNaseI sensitivity as a continuous function using sequencing tag density (Raw Signal), and discrete loci of DNaseI sensitive zones (HotSpots) and hypersensitive sites (Peaks)." For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-06-03 | GSE29692 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (mailto:jernst@mit.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track displays a chromatin state segmentation for each of nine human cell types (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?term=GM12878,H1-hESC,HepG2,HUVEC,HMEC,HSMM,K562,NHEK,NHLF). A common set of states across the cell types were learned by computationally integrating ChIP-seq data for nine factors plus input (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?term=CTCF,H3K4me1,H3K4me2,H3K4me3,H3K27ac,H3K9ac,H3K36me3,H4K20me1,H3K27me3,Input) using a Hidden Markov Model (HMM). In total, fifteen states were used to segment the genome, and these states were then grouped and colored to highlight predicted functional elements. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2012-05-24 | GSE38163 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Yijun Ruan mailto:ruanyj@gis.a-star.edu.sg). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track is produced as part of the ENCODE Transcriptome Project. It shows the starts and ends of full length mRNA transcripts determined by GIS paired-end ditag (PET) sequencing using RNA extracts (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=rnaExtract) from different sub-cellular localizations (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=localization) in different cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType). The RNA-PET information provided in this track is composed of two different PET length versions based on how the PETs were extracted. The cloning-based PET (18 bp and 16 bp) is an earlier version and detailed information can be found from reference (Ng et al. 2006). The cloning-free PET (25 bp and 25 bp) is a recently modified version which uses Type II enzyme EcoP15I to generate a longer length of PET (unpublished), which results in a significant enhancement in both library construction and mapping efficiency. Both versions of PET templates were sequenced by Illumina platform at 2 x 36 bp Paired End sequencing. See the Methods and References sections below for more details. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-11-10 | GSE33600 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Piero Carninci mailto:carninci@riken.jp). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). This track shows 5' cap analysis gene expression (CAGE) tags and clusters in RNA extracts (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=rnaExtract) from different sub-cellular localizations (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=localization) in multiple cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType). A CAGE cluster is a region of overlapping tags with an assigned value that represents the expression level. The data in this track were produced as part of the ENCODE Transcriptome Project. Release 2 has three new downloads only files per experiment (Clusters, TSS Gencode 7 and TSS HMM) and four new cell lines (A459, AG04450, BJ and SK-N-SH_RA). Release 1 on hg19 contained the original data on hg18 (http://hgwdev.cse.ucsc.edu/cgi-bin/hgTrackUi?db=hg18&g=wgEncodeRikenCage) that was remapped and indicated in this release as Generation 0 since that data had no replicates. If there is both old and new generation data available for a particular experiment, only the new generation data is displayed and the older data is available for download. The new data for this track was done with a different process and has standard replicate numbers. The replicate labeling in the genome browser view is a counter indicating the total number of replicates submitted. The producing lab has replicate numbers that correspond to their internal bio-replicate numbering. Where these two numbering systems conflict, both are listed in the long label of the specific track. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2011-12-16 | GSE34448 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Georgi K. Marinov mailto:georgi@caltech.edu (data coordination/informatics/experimental), Diane Trout mailto:diane@caltech.edu (informatics) Brian Williams mailto:bawilli_91125@yahoo.com (experimental)). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). RNA-seq is a method for mapping and quantifying the transcriptome of any organism that has a genomic DNA sequence assembly (Mortazavi et al., 2008). RNA-seq is performed by reverse-transcribing an RNA sample into cDNA, followed by high-throughput DNA sequencing, which was done here on the Illumina HiSeq sequencer. The transcriptome measurements shown on these tracks were performed on polyA selected RNA (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?term=longPolyA&type=rnaExtract) from total cellular RNA (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?term=cell&type=localization). PolyA-selected RNA was fragmented by magnesium-catalyzed hydrolysis and then converted into cDNA by random priming and amplified. Paired-end 2x100 bp reads were obtained from each end of a cDNA fragment. Reads were aligned to the mm9 human reference genome using TopHat (Trapnell et al., 2009), a program specifically designed to align RNA-seq reads and discover splice junctions de novo. All sequence and alignments files are available at http://hgwdev.cse.ucsc.edu/cgi-bin/hgFileUi?db=mm9&g=wgEncodeCaltechRnaSeq.
2012-05-10 | GSE37909 | GEO
Project description:This data was generated by ENCODE. If you have questions about the data, contact the submitting laboratory directly (Scott Tenenbaum mailto:STenenbaum@uamail.albany.edu). If you have questions about the Genome Browser track associated with this data, contact ENCODE (mailto:genome@soe.ucsc.edu). The RNA binding protein (RBP) associated mRNA sequencing track (RIP-Seq) is produced as part of the Encyclopedia of DNA Elements (ENCODE) Project (http://hgwdev.cse.ucsc.edu/ENCODE/index.html). This track displays transcriptional fragments associated with RBP in cell lines (http://hgwdev.cse.ucsc.edu/cgi-bin/hgEncodeVocab?type=cellType) K562 and GM12878, using Ribonomic profiling via Illumina SBS. In eukaryotic organisms gene regulatory networks require an additional level of coordination that links transcriptional and post-transcriptional processes. Messenger RNAs have traditionally been viewed as passive molecules in the pathway from transcription to translation. However, it is now clear that RNA-binding proteins play a major role in regulating multiple mRNAs in order to facilitate gene expression patterns. These tracks show the associated mRNAs that co-precipitate with the targeted RNA-binding proteins using RIP-Seq profiling. For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf
2012-06-06 | GSE35585 | GEO