Project description:Batch cultures of Wild-type C. jejuni NCTC11168 were grown in 150 ml volumes of Mueller-Hinton broth in 250 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10 % O2, 10 % CO2, 80 % N2) from Don Whitley Scientific, Ltd which also maintained the growth temperature at 42 ÂºC. When mid-exponential phase was reached 0.25 mM GSNO was added to half of the cultures. After a 10 minute exposure samples of both treated and untreated cells were harvested into phenol/ethenol to stabilize the RNA and total RNA was purified using Qiagenâs RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. A C. jejuni cgb mutant was grown in two parallel custom-built chemostats based on Sigma Proculture Dynalift spinner flasks with a working volume of 125 ml, and the dilution rate (which at steady state is equal to the specific growth rate) of 0.1 h-1. A gas mix of 10% O2, 10% CO2 and 80% N2 was passed into the head space of the culture vessel at a rate of 0.25 l min-1 to obtain a microaerobic atmosphere, and silicone water jackets maintained the temperature at 42 ÂºC. The flasks were placed on KMO 2 basic IKA-Werke stirrers (arbitrary setting, 260; Scientific Laboratory Supplies), which gaveeffective transfer of O2 from the gaseous atmosphere to the culture by virtue of a stable vortex. A fresh overflow sample was used to check the pH at the time of harvest (which was consistently between 6.6 and 7) and to ensure that there was no contamination by plating a 20 Î¼l sample onto both nutrient agar plates incubated at 37 Â°C at atmospheric oxygen, and Mueller-Hinton plates incubated at 42 Â°C in the microaerophilic work station. When staedy-state was reached, as verified by collecting at least 5 culture volumes, GSNO (final concentration 0.25 mM) was added to one culture. After a further 10 min the 125 ml volume was separated into 3 equal volumes and each was mixed immediately on ice with 3.56 ml 100% ethanol and 185 ml phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. cDNA synthesis was carried out using 12 Âµg of starting material, which was primed with 9 Âµg of pd(N)6 random hexamers (Amersham Biosciences). Reaction mixtures (20 Âµl) containing 0.5 mM ATP, 0.5 mM TTP, 0.5 mM GTP, 0.2 mM CTP, and 1 mM Cy3- or 1 mM Cy5-dCTP were incubated for 2 h at 42 Â°C with 200 U of Superscript II RNase H reverse transcriptase (Invitrogen). Following synthesis, cDNA was purified by using a PCR purification kit (Qiagen) to remove the unincorporated deoxynucloside triphosphates, fluorescent dye, and primers. Equal volumes of cDNA were combined and evaporated to near dryness with an SPD121P Speed Vac (Thermon Savant). For hybridisation to the microarray slides, cDNA was resuspended in an appropriate volume of salt-based hybridization buffer (provided by Ocimum Biosolutions). Prior to addition to the slides, cDNA samples were heated to 95 Â°C for 3 min, and then placed on ice for no more than 3 min. The slides were placed in MWG Biotech hybridization chambers and incubated for 16 to 24 h in a shaking water bath at 110 rpm and 42 Â°C. Following incubation , the slides were washed sequentially for 5 min in 2x SSC-1 % sodium dodecyl sulphate, 1x SSC, 0.5x SSC and 0.1x SSC at 37 Â°C with gentle agitation (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). The slides were dried by centrifugation at 254 xg for 5 min and subsequently scanned with an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained by using commercially available software from Biodiscovery, Inc. (Imagine version 4.0, and Genesight, version 3.5). The mean values from each channel were log2 transformed and normalized by using the subtract-by-mean method to remove intensity-dependent effects in the log2 (ratio) values. The Cy3/Cy5 fluorescence ratios were calculated from the normalized values. Biological experiments (i.e. chemostat growth with and without 0.25 mM GSNO addition) were carried out three times and a dye swap was performed for two of the three experiments which provided two technical repeats, one each for two of the three biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed â¥ twofold and displayed and P value of â¤ 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.

Project description:Two batch cultures of Wild-type C. jejuni NCTC 11168 were grown in 100 ml volumes of Mueller-Hinton broth in 250 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10 % Oxygen, 10 % Carbon dioxide, 80 % Nitrogen) from Don Whitley Scientific, Ltd which also maintained the growth temperature at 42 M-BM-:C. When mid-exponential phase was reached 0.010 mM NOC-5 & NOC-7 was added to one of the cultures. After a 15 minute exposure samples of both treated and untreated cells were harvested into phenol/ethanol to stabilize the RNA and total RNA was purified using QiagenM-bM-^@M-^Ys RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. Batch cultures of Wild-type C. jejuni NCTC 11168 were grown in 100 ml volumes of Mueller-Hinton broth in 250 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10 % Oxygen, 10 % Carbon dioxide, 80 % Nitrogen) from Don Whitley Scientific, Ltd which also maintained the growth temperature at 42 M-BM-:C. When mid-exponential phase was reached 0.25 mM GSNO was added to half of the cultures. After a 10 minute exposure, 30 ml samples of both treated and untreated cells were mixed immediately on ice with 3.56 ml 100% ethanol and 185 M-BM-5l phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. Equivalent amounts of RNA (15 M-NM-<g) from control and test cultures were used as template for synthesis of labelled cDNA. Labelling was done by using dCTP nucleotide analogues containing either Cy3 or Cy5 fluorescent dyes. RNA was primed with 9 M-NM-<g pd(N)6 random hexamers (Amersham Biosciences). For annealing, the mixture was incubated for 10 min at 65oC and then 10 min at room temperature. Each reaction mixture (0.5 mM dATP, dTTP and dGTP, 0.2 mM dCTP, 0.1 mM DTT (Invitrogen) and 1 mM Cy3-dCTP or Cy5-dCTP, total volume 25ul) was incubated for 3 h at 42 oC with 200 U of Superscript III RNase-H Reverse Transcriptase (Invitrogen). The reaction was terminated by the addition of 5u1 mM NaOH and heating the tube to 65 oC for 10 min to hydrolyse the RNA. Then it was neutralised with 5ul 1M HCl and 1 M TE (pH 8). Purification of cDNA was done with a PCR purification kit (Qiagen). The cDNA was eluted and resuspended in 30 M-NM-<l elution buffer (Qiagen, supplied in kit). Each slide set (control slide and dye-swap) was prepared as follows: For control slide Cy3-dCTP labelled control cDNA was mixed with Cy5-dCTP labelled test cDNA. For dye-swap slide Cy5-dCTP labelled control cDNA was mixed with Cy3-dCTP labelled test cDNA. This is made for compensate possible differences in the labelled nucleotides incorporation. The slides used were C. jejuni OciChipM-BM-. arrays from Ocimum Biosolutions. The cDNA mixture for each slide was dried by evaporation for approximately 35 min in a SPD 121P SpeedVacM-BM-. (Thermo Savant, Waltham, MA, USA) The dry cDNA was resuspended in pre-warmed (42M-BM-:C) salt-based hybridisation buffer (Ocimum Biosolutions) and was heated to 95 M-BM-0C for 3 min and then placed on ice for 3 min. The spoted area of the slide (located with an array finder) was enclosed within a gene frame (MWG/Ocimum). The cDNA suspension was distributed through the inner space of the gene frame and enclosed with an air-tight coverslip. The slides were incubated for 16-24 hours at 42M-BM-: C in sealed MWG hybridisation chambers shaken in a water bath. After incubation, gene frames and coverslips were removed and slides washed sequentially in 2x, 1x, 0.2x y 0.1x SSC buffer, by shaking for 5 minutes at 80 rpm at 37M-BM-: C pre-warmed buffer. (2x buffer was supplemented with 1% SDS). Then the slides were dried by centrifugation at 250 x g for 5 min. Slides were scanned using an Affymetrix 428 scanner. The processing of images and quantification of the microarrays signal was done using software from Biodiscovery Inc (Imagene, version 4.0 and Genesight, version 4.0). Spots with signal intensity lower than background or other significant blemishes were eliminated from subsequent processing. Mean values from each channel were then log2 transformed and normalised using the Subtract by Mean method to remove intensity-dependent effects in the log2 (ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalised values. Significance analysis of the data used the StudentM-bM-^@M-^Ys t test to determine the probability that the average of the experimental replicates was significantly different from the average of the control replicates. p-values for the data were calculated by treating each slide as a repeat using Genesight 4. Genes differentially regulated M-bM-^IM-% 2-fold and displaying a p-value of M-bM-^IM-$ 0.05 were defined as being statistically significant and differentially transcribed.

Project description:Batch cultures of Wild-type C. jejuni NCTC 11168 were grown in 200 ml volumes of Mueller-Hinton broth in 250 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10 % Oxygen, 10 % Carbon dioxide, 80 % Nitrogen) from Don Whitley Scientific, Ltd which also maintained the growth temperature at 42 M-BM-:C. When mid-exponential phase was reached 0.010 mM NOC-5 & NOC-7 was added to one of the cultures. After a 15 minute exposure samples of both treated and untreated cells were harvested into phenol/ethanol to stabilize the RNA and total RNA was purified using QiagenM-bM-^@M-^Ys RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. Batch cultures of Wild-type C. jejuni NCTC 11168 were grown in 200 ml volumes of Mueller-Hinton broth in 250 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10 % Oxygen, 10 % Carbon dioxide, 80 % Nitrogen) from Don Whitley Scientific, Ltd which also maintained the growth temperature at 42 M-BM-:C. When mid-exponential phase was reached 0.25 mM GSNO was added to half of the cultures. After a 10 minute exposure, 30 ml samples of both treated and untreated cells were mixed immediately on ice with 3.56 ml 100% ethanol and 185 M-BM-5l phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. Equivalent amounts of RNA (15 M-NM-<g) from control and test cultures were used as template for synthesis of labelled cDNA. Labelling was done by using dCTP nucleotide analogues containing either Cy3 or Cy5 fluorescent dyes. RNA was primed with 9 M-NM-<g pd(N)6 random hexamers (Amersham Biosciences). For annealing, the mixture was incubated for 10 min at 65oC and then 10 min at room temperature. Each reaction mixture (0.5 mM dATP, dTTP and dGTP, 0.2 mM dCTP, 0.1 mM DTT (Invitrogen) and 1 mM Cy3-dCTP or Cy5-dCTP, total volume 25ul) was incubated for 3 h at 42 oC with 200 U of Superscript III RNase-H Reverse Transcriptase (Invitrogen). The reaction was terminated by the addition of 5ul 1 mM NaOH and heating the tube to 65 oC for 10 min to hydrolyse the RNA. Then it was neutralised with 5ul 1 M HCl and 1 M TE (pH 8). Purification of cDNA was done with a PCR purification kit (Qiagen). The cDNA was eluted and resuspended in 30 M-NM-<l elution buffer (Qiagen, supplied in kit). Each slide set (control slide and dye-swap) was prepared as follows: For control slide Cy3-dCTP labelled control cDNA was mixed with Cy5-dCTP labelled test cDNA. For dye-swap slide Cy5-dCTP labelled control cDNA was mixed with Cy3-dCTP labelled test cDNA. This is made for compensate possible differences in the labelled nucleotides incorporation. The slides used were C. jejuni OciChipM-BM-. arrays from Ocimum Biosolutions. The cDNA mixture for each slide was dried by evaporation for approximately 35 min in a SPD 121P SpeedVacM-BM-. (Thermo Savant, Waltham, MA, USA) The dry cDNA was resuspended in pre-warmed (42M-BM-:C) salt-based hybridisation buffer (Ocimum Biosolutions) and was heated to 95 M-BM-0C for 3 min and then placed on ice for 3 min. The spoted area of the slide (located with an array finder) was enclosed within a gene frame (MWG/Ocimum). The cDNA suspension was distributed through the inner space of the gene frame and enclosed with an air-tight coverslip. The slides were incubated for 16-24 hours at 42M-BM-: C in sealed MWG hybridisation chambers shaken in a water bath. After incubation, gene frames and coverslips were removed and slides washed sequentially in 2x, 1x, 0.2x y 0.1x SSC buffer, by shaking for 5 minutes at 80 rpm at 37M-BM-: C pre-warmed buffer. (2x buffer was supplemented with 1% SDS). Then the slides were dried by centrifugation at 250 x g for 5 min. Slides were scanned using an Affymetrix 428 scanner. The processing of images and quantification of the microarrays signal was done using software from Biodiscovery Inc (Imagene, version 4.0 and Genesight, version 4.0). Spots with signal intensity lower than background or other significant blemishes were eliminated from subsequent processing. Mean values from each channel were then log2 transformed and normalised using the Subtract by Mean method to remove intensity-dependent effects in the log2 (ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalised values. Significance analysis of the data used the StudentM-bM-^@M-^Ys t test to determine the probability that the average of the experimental replicates was significantly different from the average of the control replicates. p-values for the data were calculated by treating each slide as a repeat using Genesight 4. Genes differentially regulated M-bM-^IM-% 2-fold and displaying a p-value of M-bM-^IM-$ 0.05 were defined as being statistically significant and differentially transcribed.

Project description:Two batch cultures of wild-type C. jejuni NCTC 11168 were grown in 200 ml volumes of Mueller-Hinton broth in 500 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10% Oxygen, 10% Carbon dioxide, 80% Nitrogen) from Don Whitley Scientific, Ltd, which also maintained the growth temperature at 42 M-BM-:C. When mid-exponential phase was reached, a custom-made diffusion capsule (as described in Pirt, 1971) containing chicken caecal contents was placed for 10, 30, or 60 minutes. After the exposure, samples of both treated and untreated cells were harvested into phenol/ethanol to stabilize the RNA and total RNA was purified using Qiagen's RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. Batch cultures of wild-type C. jejuni NCTC 11168 were grown in 200 ml volumes of Mueller-Hinton broth in 500 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10% Oxygen, 10% Carbon dioxide, 80% Nitrogen) from Don Whitley Scientific, Ltd, which also maintained the growth temperature at 42 M-BM-:C. When mid-exponential phase was reached, a custom-made diffusion capsule (as described in Pirt, 1971) containing chicken caecal contents was placed for 10, 30, or 60 minutes. After the exposure, 30 ml samples of both treated and untreated cells were mixed immediately on ice with 3.56 ml 100% ethanol and 185 M-BM-5l phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. Equivalent amounts of RNA (15 M-NM-<g) from control and test cultures were used as template for synthesis of labelled cDNA. Labelling was done by using dCTP nucleotide analogues containing either Cy3 or Cy5 fluorescent dyes. RNA was primed with 9 M-NM-<g pd(N)6 random hexamers (Amersham Biosciences). For annealing, the mixture was incubated for 10 min at 65oC and then 10 min at room temperature. Each reaction mixture (0.5 mM dATP, dTTP and dGTP, 0.2 mM dCTP, 0.1 mM DTT (Invitrogen) and 1 mM Cy3-dCTP or Cy5-dCTP, total volume 25ul) was incubated for 3 h at 42 oC with 200 U of Superscript III RNase-H Reverse Transcriptase (Invitrogen). The reaction was terminated by the addition of 5ul 1 mM NaOH and heating the tube to 65 oC for 10 min to hydrolyse the RNA. Then it was neutralised with 5ul 1 M HCl and 1 M TE (pH 8). Purification of cDNA was done with a PCR purification kit (Qiagen). The cDNA was eluted and resuspended in 30 M-NM-<l elution buffer (Qiagen, supplied in kit). Each slide set (control slide and dye-swap) was prepared as follows: For the control slide, Cy3-dCTP labelled control cDNA was mixed with Cy5-dCTP labelled test cDNA. For the dye-swap slide, Cy5-dCTP labelled control cDNA was mixed with Cy3-dCTP labelled test cDNA. This is made to compensate for possible differences in the labelled nucleotides incorporation. The slides used were C. jejuni OciChipM-BM-. arrays from Ocimum Biosolutions. The cDNA mixture for each slide was dried by evaporation for approximately 35 min in a SPD 121P SpeedVacM-BM-. (Thermo Savant, Waltham, MA, USA). The dry cDNA was resuspended in pre-warmed (42M-BM-:C) salt-based hybridisation buffer (Ocimum Biosolutions) and was heated to 95 M-BM-0C for 3 min and then placed on ice for 3 min. The spotted area of the slide (located with an array finder) was enclosed within a gene frame (MWG/Ocimum). The cDNA suspension was distributed through the inner space of the gene frame and enclosed with an air-tight coverslip. The slides were incubated for 16-24 hours at 42M-BM-: C in sealed MWG hybridisation chambers shaken in a water bath. After incubation, gene frames and coverslips were removed and slides washed sequentially in 2x, 1x, 0.2x y 0.1x SSC buffer, by shaking for 5 minutes at 80 rpm at 37M-BM-: C pre-warmed buffer. (2x buffer was supplemented with 1% SDS). Then the slides were dried by centrifugation at 250 x g for 5 min. Slides were scanned using an Affymetrix 428 scanner. The processing of images and quantification of the microarrays signal was done using software from Biodiscovery Inc. (ImaGene, version 4.0 and GeneSight, version 4.0). Spots with signal intensity lower than background or other significant blemishes were eliminated from subsequent processing. Mean values from each channel were then log2 transformed and normalised using the Subtract by Mean method to remove intensity-dependent effects in the log2 (ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalised values. Significance analysis of the data used the Student's t test to determine the probability that the average of the experimental replicates was significantly different from the average of the control replicates. p-values for the data were calculated by treating each slide as a repeat using Genesight 4. Genes differentially regulated M-bM-^IM-% 2-fold and displaying a p-value of M-bM-^IM-$ 0.05 were defined as being statistically significant and differentially transcribed.

Dataset Information

Campylobacter jejuni exposure to 0.25mM GSNO

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure