Proteomics analysis of VD3 intervention on bleomycin-induced pulmonary fibrosis in mice
Ontology highlight
ABSTRACT:
ORGANISM(S): Mus Musculus
SUBMITTER: 
Yuanyuan Shi
PROVIDER: PXD021699 | iProX | Sun Sep 27 00:00:00 BST 2020
REPOSITORIES: iProX
Similar Datasets
Project description:The chromatin fraction was isolated from 5x107 HeLa cells. Chromatin was digested in 100 mL of MNase (40 units/ mL ) reaction buffer for 3 min at 37 °C in a thermomixer (1,400 rpm). After addition of 10 L EGTA (25mM) to inactivate MNase, soluble digested chromatin was collected by 13,000 rpm centrifuge for 5 min. 10 mg of Pol II antibody was conjugated to magnetic protein A beads. The supernatant was diluted with 400 mL of NET-2 buffer and pSer2-Pol II antibody-conjugated beads were added. Incubated the IP reaction at 4 °C for 1 hr. The beads were washed with 1 mL of NET-2 buffer six times and 100 mL of 1xPNKT (1xPNK buffer and 0.05% Triton X-100) buffer once. Washed beads were incubated in 50 mL PNK reaction mix (1xPNKT, 1 mM ATP and 0.05 U/ml T4 PNK (NEB)) in Thermomixer at 37 °C, 1,400 rpm for 6 min. Beads were washed with 1 mL of NET-2 buffer once and RNA was extracted with Trizol reagent. RNA was suspended in urea Dye (7M Urea, 1xTBE, 0.1% BPB and 0.1% XC) and resolved on 6% TBU gel (Invitrogen) at 200 V for 5 min. Gels with 30-160 nt RNAs were collected. 0.2 mL tube was prepared with holes made with 25G needle and placed in a 1.5 mL tube. Gel fragments were placed in the layered tube and broken down by centrifugation at 12,000 rpm for 1 min. The small RNAs were eluted from gel using RNA elution buffer (1 M NaOAc and 1 mM EDTA) at 25 °C for 1 hr in Thermomixer (900 rpm). Eluted RNA was purified with SpinX column (Coster) with 2 glass filters (Millipore) and the flow-through RNA was ethanol precipitated.
2019-10-15 | GSE134102 | GEO
Project description:Proteomic analysis of pervanadate-induced tyrosine-phosphorylated proteins in hepatocellular carcinoma WRL 68 cells Protein tyrosine phosphorylation plays critical roles in modulating biological processes such as cellular proliferation, differentiation, migration, apoptosis and metabolism. To profile tyrosine phosphorylated (pTyr) proteins as well as search novel pTyr proteins as cross-talk points among different cellular pathways, we developed a rapid and efficient approach to identify cellular pTyr proteins and their complexes by a combination of subcellular proteomics approach with signal transduction strategies. Human hepatocytic cells from WRL68 cell line were treated with pervanadate (POV), subfractionated into four fractions and then subjected to immunoaffinity purification with anti-pTyr antibody. The eluted mixtures of the anti-pTyr purification were identified by LC-MS/MS. Subcellular fractionation and affinity purification of tyrosine-phosphorylated proteins: WRL68 cells were first grown to 80% confluence in MEM complete medium and then the medium replaced with serum free media. After 15 h, the cells were either untreated or stimulated with 0.1 mM pervanadate (1 mM sodium orthovanadate, 3 mM H2O2) for 10 min. 150-mm cultures of WRL 68 cells were rinsed twice with 4? PBS and then scraped from the dish in 750?l of hypotonic buffer (10 mM Tris, 1 mM NaF, 10 mM IAA, pH 7.5) containing a cocktail of protein inhibitors. After a 20-min incubation on ice, the cells were passed about five times through a 25-g needle. The resulting lysate was subjected to a 15min centrifugation at 1000 rpm at 4?, after which the pellet was resuspended in 250?l of hypotonic buffer and re-extracted by a second round of the trituration and centrifugation. The supernatants of the first and second spins were combined, adjusted to 0.25 M NaCl, and separated into cytosolic (supernatant) and membrane (pellet) fractions bycentrifugation at 19,000 rpm (43,000 g) for 90 min at 4?. All the pellets and total cell lysate were resuspended in RIPA buffer (50 mM Tris-HCl, 150 mM NaCl, 1% Triton X-100, 0.1% SDS, 1% deoxycholic acid sodium) containing 1mM pervanadate with a cocktail of protein inhibitors with sonication aid. Cleared cell lysates were incubated overnight at 4? with 30?l monoclonal anti-phosphotyrosine-agrose (Sigma). Precipitated immune complexes were washed three times with 1×HNTG (20 mM HEPES, 150 mM NaCl, 0.1% Triton X-100, 10% Glycerol, pH 7.5) and then eluted with 100 mM phenyl phosphate (Sigma) in lysis buffer at 4?. Enzyme digestion, mass spectrometry and protein identification: The sample was digested according to the published method. Chromatography was performed using a surveyor LC system (Thermo Finnigan,SanJose,CA) on C18 reverse phase column(RP, 180 µm x 150 mm, BioBasic® C18, 5 µm, Thermo Hypersil-Keystone). The pump flow rate is split 1:100 for a colum flow rate of 1.5 µL/min.The column effluent is directly electrosprayed using the orthogonal metal needle source without further splitting.Mobile phase A is 0.1% formic acid in water,and the B mobile phase is 0.1% formic acid in acetonitrile. The separation of peptides obtained by enzymatic digest of bile sample was achieved with a gradient of 2-80% B over 360 min.The column effluent from the reverse phase column was analyzed by LCQ Deca XP ion-trap mass spectrometer.The micro-electrospray interface uses a 30 µm metal needle that is orthogonal to the inlet of the LCQ.The mass spectrometer was set that one full MS scan was followed by three MS/MS scans on the three most intense ion from the MS spectrum with the following Dynamic Exclusion™ settings: repeat count, 1; repeat duration, 0.5 min; exclusion duration, 3.0 min. The acquired MS/MS spectra were automatically searched against protein database for human proteins (SWISS-PROT/TrEMBL) using the TurboSEQUEST program in the BioWorks™ 3.0 software suite. An accepted SEQUEST result had to have a ?Cn score of at least 0.1 (regardless of charge state) and Xcorr (one charge?1.5, two charges?2.0, three charges?2.5). Single peptides that alone identify a protein were manually validated after meeting the above criteria. Bioinformatics analysis: The pI and MW of the proteins were analyzed using ExPASy proteomics tools accessed from http://cn.expasy.org/tools/#proteome. The grand average hydropathicity (GRAVY) values were determined according to Kyte-Doolittle. The protein subcellular location annotation was from SwissProt &TrEMBL protein database (http://us.expasy.org/sprot/). The protein function family was categorized according to Gene Ontology (GO) annotation terms extracted by InterPro (http://www.ebi.ac.uk./interpro/). The annotation of protein phosphorylation was from SwissProt &TrEMBL protein database (http://us.expasy.org/sprot/) and PhosphoSite (http://www.phosphosite.org). The kinases were annotated according to human kinome. Keywords: other
2005-04-07 | GSE2408 | GEO
Project description:Female Sprague-Dawley rats were randomly separated into two groups: i) trained (Ex group) and ii) sedentary (Cont group). Animals from the Ex group were adapted to treadmill exercise for two consecutive weeks, involving a gradual increase in the running time till 60 min/day at 20 m/min, 0% grade, 5 days/week. This exercise program remained constant until the end of the 54 weeks. Mitochondria isolation from 10 animals (5 Ex group and 5 Cont group) was performed using the conventional methods of differential centrifugation. Mitochondrial protein extracts were reduced with dithiothreitol, alkylated with iodoacetamide and digested with trypsin using the FASP procedure (18). Briefly, each sample was solubilized in 4 % SDS, 0.1 M DTT, 0.1 M HEPES and incubated for 30 min at 60 C. Then, samples were mixed with 0.2 mL of a solution of 8 M Urea, 0.1 M HEPES, pH 8.5 (UH solution), loaded into the filtration devices (3k Microcon, Millipore), centrifuged at 14,000 g for 20 min, and washed twice with UH solution. After centrifugation, the concentrates were alkylated with 50 mM iodoacetamide in UH solution (dark, 25 C, 20 min), and washed twice with UH solution. The concentrate was diluted with 0.1 mL of 50 mM ammonium bicarbonate (ABC) and digested overnight (37 C) with the addition of 2 ug of trypsin diluted in 30 uL of 50 mM ABC. The resulting tryptic peptides were collected by centrifugation and the filter were washed twice with 50 uL of 50 mM ABC. Eluted peptides were acidified with 10 uL of formic acid and cleaned up on a homemade Empore C18 column (3M, St. Paul, MN, USA) (ref) for subsequent phospho-enrichment and/or analysis by LC-MS/MS. The dried protein digest was dissolved with 10 uL (3 % ACN, 0.1 % TFA), diluted 1:5 with loading buffer (1 M glycolic acid, 5 % TFA, 80 % ACN) and phosphopeptides were enriched on TiO2-beads as previously described (19). Briefly 5 mg of "Titansphere TiO2 5 um" were suspended in 100 uL of 100 % ACN, immobilized in a pipette-column and washed using 5 uL of loading buffer. Each sample was loaded in each pipette-column and then washed with 30 uL of washing buffer (1 % TFA, 80 % ACN). Phosphopeptides were eluted from the beads with 25 uL of 25 % ACN (v/v) containing 25 % NH4OH (m/v), acidified with 10 uL of 10 % TFA and vacuum- concentrated to approximately 4 uL. Samples were finally diluted to 10 uL with H2O + 0.1% formic acid prior to injection. The peptides mixtures were analyzed by online nanoflow liquid chromatography tandem mass spectrometry (nanoLC-MS/MS) on an EASY-nLC system (Proxeon Biosystems, Odense, Denmark) connected to the LTQ Orbitrap Velos instrument (Thermo Fisher Scientific, Bremen, Germany) through a nanoelectrospray ion source. Six microliters of the peptide mixture were auto-sampled directly onto the analytical HPLC column (120 mm x75 um I.D., 3 um particle size (Nikkyo Technos Co., Ltd.) with a 120-min gradient from 5 % to 50 % ACN in 0.1 % FA. The effluent from the HPLC column was directly electrosprayed into the mass spectrometer. The LTQ Orbitrap Velos instrument was operated in data-dependent acquisition mode to automatically switch between full scan MS and MS/MS acquisition. The MS survey scan was performed in the FT cell recording a window between 350 and 2000 m/z. The resolution was set to 60 000, and the automatic gain control was set to 1,000,000 ions with a maximal acquisition time of 400 ms. The 20 most intense peptide ions with charge states great than or equal to 2 were sequentially isolated to a target value of 5,000 and fragmented in the high-pressure linear ion trap by low-energy CID with normalized collision energy of 35% Q value of 0.25, and an activation time of 10 ms. Raw files were processed using Proteome Discoverer version 1.3 (Thermo Fisher Scientific, Bremen). Peak lists were searched using Mascot software version 2.3 (Matrix Science, UK) against a SwissProt database containing entries corresponding to Rattus norvegicus (version of July 2012), a list of common contaminants, and all the corresponding decoy entries. Trypsin was chosen as enzyme and a maximum of two miscleavages were allowed. Carbamidomethylation (C) was set as a fixed modification, whereas oxidation (M) and phosphorylation (STY) were used as variable modifications. Searches were performed using a peptide tolerance of 7 ppm, a product ion tolerance of 0.5 Da. Resulting data files were filtered for FDR less than 1 % at peptide level.
2014-02-14 | PXD000354 | Pride
Project description:Samples were reduced by the addition of TCEP (25 mM final concentration) and incubated at 37 ºC for 10 min. Alkylation was carried out by the addition of iodoacetamide (25 mM final concentration) and incubated at RT for 1 h in the dark. Samples were then digested by the addition of 1:50 LysC (Wako, Japan) in 100 mM triethylammonium bicarbonate (TEAB) followed by incubation at 37 ºC for 6h and then addition of 1:50 trypsin (Thermo) followed by incubation at 37 ºC overnight. The efficiency of sample digestion efficiency was assessed by MS (LTQ XL, Thermo). The samples were then vacuum-dried and resuspended in 100 mM TEAB (100 µL). Samples were then incubated in their respective Tandem Mass Tag™ (TMT) 10-plex reagents (Thermo) for 1 h at RT with agitation. Reactions were quenched by the addition of 5% hydroxylamine for 15 min and each set of samples (treated and vehicle) were pooled in the same tube and dried overnight. The TMTTM-labelled samples were dried and kept at -85 ºC until further analysis.
2021-07-18 | PXD023780 | Pride
Project description:Washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da Oxidation (M) and Carbamidomethyl (C) specified as variable modifications Enzyme specificity was trypsin, 1 missed cleavage was possible
2014-04-28 | PXD000505 | Pride
Project description:Bacteria were washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da; Oxidation (M) and Carbamidomethyl (C) specified as variable modifications, Enzyme specificity was trypsin, 1 missed cleavage was possible
2014-04-28 | PXD000504 | Pride
Project description:Flag-YBX1 overexpressed T24 cells pellets were resuspended with 2 volume of lysis buffer (150 mM KCl, 10 mM HEPES pH 7.6, 2 mM EDTA, 0.5% NP-40, 0.5 mM DTT, 1:100 protease inhibitor cocktail, 400 U/ml RNase inhibitor), and incubated at 4 °C for 30 min with rotation. Then the lysate was centrifuged at 15 000 g for 20 min. Before incubating the lysate with Flag beads, 100ul were taken as input. The anti-Flag M2 magnetic beads (Sigma, 10 μl per mg lysate) were washed with NT2 buffer (200 mM NaCl, 50 mM HEPES pH 7.6, 2 mM EDTA, 0.05% NP-40, 0.5 mM DTT, 200 U/ml RNase inhibitor) four times. Cell lysate was mixed with M2 beads and incubated at 4 °C for 4 h with rotation. The beads were washed two times with 1 ml ice-cold NT2 buffer. Then the beads were subject to Micrococal nuclease (NEB) digestion (1:1 000 000 dilution) for 8 min at 37 °C. The beads were cooled on ice immediately for 5 min and washed two times with 1 ml ice-cold 1× PNK+EGTA buffer (50 mM Tris-HCl pH 7.5, 20 mM EDTA, 0.05% NP-40, 200 U/ml RNase inhibitor) and two times with 1 ml ice-cold 1× PK buffer (50 mM NaCl, 100 mM Tris-HCl pH 7.5, 10 mM EDTA, 0.2% SDS, 200 U/ml RNase inhibitor). Then the beads were digested with 200 μl pre-heated (20 min at 50 °C) Proteinase K and RNAs were extracted with an equal volume of Acid-Phenol: Chloroform, pH 4.5 (Ambion). The RNAs were subjected to rRNA removal and Bisseq. The libraries were sequenced on the Illumina HiSeq X-Ten platform at Novogene (Tianjin, CA) with paired-end 150 bp read length.The m5C sites were called using meRanCall from meRanTK (FDR < 0.01).
2019-07-02 | GSE133625 | GEO
Project description:Peptides were labeled with TMT reagents based on the manufacturer’s instructions (Thermo Fisher Scientifific). To quantify six samples, each aliquot (100 µg of peptide equivalent) was reacted with one tube of TMT reagent. After the sample was dissolved in 100 µL of 0.05 M tetraethylammonium bromide (TEAB) solution, pH 8.5, the TMT reagent was dissolved in 41 µL of anhydrous acetonitrile. The mixture was incubated at room temperature for 1 hour.Then, 8 µL of 5% hydroxylamine was added to the sample and incubated for 15 min to quench the reaction. The 6-plex labeled samples were pooled together and lyophilized. The TMT-labeled peptides mixture was fractionated using a Waters XBridge BEH130 column (C18, 3.5 µm, 2.1 × 150 mm) on an Agilent 1290 high-performance liquid chromatography(HPLC) operating at 0.3 mL/min.
2020-05-16 | PXD019233 | iProX
Project description:Glands were frozen at -80 ºC immediately after being retrieved and stored under this condition until initiating the proteomics analysis protocol. Glands were washed with cold PBS and immersed in 120 l of homogenization buffer (50 mM Tris-HCl, pH 6.8, 10 mM DTT, 4% (w/v) SDS). Glands were boiled for 5 min, incubated overnight at 4 ºC and centrifuged at 4 ºC and 13000 rpm for 10 min. The whole gland proteome of each gland was concentrated as described elsewhere (Bonzon-Kulichenko, F. Garcia-Marques, M. Trevisan-Herraz and J. Vazquez, Journal of Proteome Research, 2015, 14, 700-710 (DOI:10.1021/pr5007284).Briefly, samples were loaded into an SDS-PAGE gel (0.5 mm-thick, 4% stacking, and 10% resolving) and the electrophoresis process was stopped when the front entered 2 mm into the resolving gel. The unseparated protein bands were then visualized by Coomassie staining, excised and digested at 37 ºC overnight with 500 l of 25 g/l chymotrypsin (Promega) in 100 mM Tris-HCl, pH 7.8 containing 10 mM CaCl2. The cleaved peptides were extracted by incubation for 2 h in 100 mM Tris-HCl, pH 7.8 on shaking, acidized with 1% (v/v) trifluoroacetic acid, desalted onto C18 cartridges (Oasis, Waters Corporation, Milford, MA, USA), and dried down.The analysis of the samples proceeded through liquid chromatography-tandem mass spectrometry (LC-MS/MS) using an Easy nLC 1000 nano-HPLC coupled to a Q-Exactive Orbitrap mass spectrometer (Themo Scientific). Peptides were injected onto a C18 reverse-phase precolumn (Acclaim PepMap100, 75-m i.d., 3-m particle size, 2-cm length, Thermo Scientific), and a reverse-phase analytical column (Acclaim PepMap 100, 75-m, i.d., 3-m particle size, 50-cm length, Thermo Scientific) in buffer A [0.1% formic acid (v/v)] and eluted with a 60 min linear gradient of buffer B [90% acetonitrile, 0.1% formic acid (v/v)], at 200 nL/min. Mass spectrometry (MS) runs consisted of 70000 FT-resolution spectra in the 390-1200 m/z wide range, followed by data-dependent MS/MS spectra of the 15 most intense parent ions acquired along the chromatographic run. High-energy collisional (HCD) fragmentation was performed at 27% of normalized collision energy and the isolation window for the parent ion mass was established at 2 Da.
2022-12-07 | PXD023141 | Pride
Project description:gDNA was estracted and digested with cocktail of restrict enzymes MseI, DdeI, AluI, MboI, incubated at 37°C for 6 h. After purified by phenol/chloroform extraction, fragmented DNA was resuspended by TE, and quantified by Qubit 3.0 (Invitrogen). For each sample, 20 μg input DNA was immunoprecipitated overnight at 4°C in a shaker, with 1× DRIP binding buffer (10 mM NaPO4 pH 7.0, 140 mM NaCl, 0.05% Triton X-100) and 10 μg S9.6 antibody (ATCC, HB-8730). After adding 50 μl Dynabeads Protein G (Invitrogen, 10004D) and incubated for 4 h, the beads with antibody were washed by 1× DRIP binding buffer for 4 times at room temperature, each wash takes 10 min. Added 250 μl elution buffer (50 mM Tris pH 8.0, 10 mM EDTA, 0.5% SDS) and 5 U Proteinase K to beads/antibody complexes, incubated for 40 min in an Eppendorf ThermoMixer at 55°C, 1,000 rpm. Purified by phenol/chloroform extraction, and moved supernatant to a new tube, followed by adding 1/10 volume 3 M NaAc, 1 μl GlycoBlue (Invitrogen) and 1 volume isopropanol, precipitated at -20°C for 3 h and then centrifuged. After washed by 70% ethanol and dried, the DRIPed DNA pellet was resuspended by 75 μl low EDTA TE buffer (10 mM Tris-HCl 8.0, 0.1 mM EDTA). NGS libraries were constructed using Accel-NGS® 1S Plus DNA Library Kit (Swift Biosciences).
2019-10-15 | GSE134101 | GEO