Analysis of phosphorylation sites of ZmRR1 phosphorylated by ZmMAPK8
Ontology highlight
ABSTRACT:
ORGANISM(S): Zea Mays
SUBMITTER: 
Shuhua Yang
PROVIDER: PXD027378 | iProX | Fri Jul 16 00:00:00 BST 2021
REPOSITORIES: iProX
Publications
Natural variation in a type-A response regulator confers maize chilling tolerance.
Zeng Rong R Li Zhuoyang Z Shi Yiting Y Fu Diyi D Yin Pan P Cheng Jinkui J Jiang Caifu C Yang Shuhua S
Nature communications 20210805 1
Maize (Zea mays L.) is a cold-sensitive species that often faces chilling stress, which adversely affects growth and reproduction. However, the genetic basis of low-temperature adaptation in maize remains unclear. Here, we demonstrate that natural variation in the type-A Response Regulator 1 (ZmRR1) gene leads to differences in chilling tolerance among maize inbred lines. Association analysis reveals that InDel-35 of ZmRR1, encoding a protein harboring a mitogen-activated protein kinase (MPK) ph ...[more]
Similar Datasets
Project description:10 µm formalin-fixed paraffin-embedded tissue sections were deparaffinized with xylene; homogenization was performed in lysis-buffer (20 mM Tris-HCl, pH 8.8, 200 mM glycine, 200 mM DTT, 4% SDS)in an ultrasonic bath; samples were incubated under continuous agitation first at 99 °C for 30 min, then at 80 °C for 60 min, afterwards centrifuged at 12,000xg for 10 min. 50 µg of protein lysate were further processed according the GASP (Gel-assisted sample preparation) protocol; peptide identification (IDA, information dependent acquisition) and SWATH measurements by LC-MS/MS on TripleTOF5600 (AB Sciex)
2020-05-18 | PXD012317 | Pride
Project description:Flag-YBX1 overexpressed T24 cells pellets were resuspended with 2 volume of lysis buffer (150 mM KCl, 10 mM HEPES pH 7.6, 2 mM EDTA, 0.5% NP-40, 0.5 mM DTT, 1:100 protease inhibitor cocktail, 400 U/ml RNase inhibitor), and incubated at 4 °C for 30 min with rotation. Then the lysate was centrifuged at 15 000 g for 20 min. Before incubating the lysate with Flag beads, 100ul were taken as input. The anti-Flag M2 magnetic beads (Sigma, 10 μl per mg lysate) were washed with NT2 buffer (200 mM NaCl, 50 mM HEPES pH 7.6, 2 mM EDTA, 0.05% NP-40, 0.5 mM DTT, 200 U/ml RNase inhibitor) four times. Cell lysate was mixed with M2 beads and incubated at 4 °C for 4 h with rotation. The beads were washed two times with 1 ml ice-cold NT2 buffer. Then the beads were subject to Micrococal nuclease (NEB) digestion (1:1 000 000 dilution) for 8 min at 37 °C. The beads were cooled on ice immediately for 5 min and washed two times with 1 ml ice-cold 1× PNK+EGTA buffer (50 mM Tris-HCl pH 7.5, 20 mM EDTA, 0.05% NP-40, 200 U/ml RNase inhibitor) and two times with 1 ml ice-cold 1× PK buffer (50 mM NaCl, 100 mM Tris-HCl pH 7.5, 10 mM EDTA, 0.2% SDS, 200 U/ml RNase inhibitor). Then the beads were digested with 200 μl pre-heated (20 min at 50 °C) Proteinase K and RNAs were extracted with an equal volume of Acid-Phenol: Chloroform, pH 4.5 (Ambion). The RNAs were subjected to rRNA removal and Bisseq. The libraries were sequenced on the Illumina HiSeq X-Ten platform at Novogene (Tianjin, CA) with paired-end 150 bp read length.The m5C sites were called using meRanCall from meRanTK (FDR < 0.01).
2019-07-02 | GSE133625 | GEO
Project description:Samples were purchased from Clontech as mRNA. Hybridization material was generated through a random-priming amplification procedure (RP-AMP) using primers with a random sequence at the 3' end and a fixed motif at the 5' end. shDNP256 (first strand synthesis): 5'- TAG ATG CTG TTG NNN NNN NNN -3' shT7N9 (second strand synthesis): 5'- ACT ATA GGG AGA NNN NNN NNN -3' 1.5 g of mRNA was reverse-transcribed with Superscript II and the DP256 random primer for 20 minutes at 42 C (10 mM DTT, 50 mM Tris-HCl pH 8.3, 75 mM KCl, 8 mM MgCl2, 0.5 mM dNTPs, 5 U/ l Superscript II). The RNA was degraded with the addition of 20 l volume of 0.5N sodium hydroxide and 0.25 M EDTA for 20 minutes at 65 C. The single stranded cDNA was purified using a commercial kit (Qiagen Qiaquick). The resulting product of single stranded cDNA was placed in its entirety in a second strand reaction. Second strand synthesis reactions utilized shT7N9 random primer and the Klenow fragment of DNA polymerase utilizing standard reaction conditions (37 C for 60 minutes, 0.2 mM DTT, 2.1 mM Tris-HCl pH 7.9, 2.1 mM MgCl2, 10.7 mM NaCl, 1.07 mM dNTPs, 0.1U/ l Klenow), followed by another Qiaquick purification. Multiple polymerase chain reactions were run using 0.15 g of double stranded DNA and standard reaction conditions. Amplification was achieved using 10 cycles of PCR with the DP256 and T7 primers (20 mM Tris-HCl pH 8.4, 50 mM KCl, 0.01 mM dNTPs, 1.5 mM MgCl2, 0.01 U/ l Taq Polymerase) DP256: 5'- GTT CGA GAC CTC TAG ATG CTG TTG -3' T7: 5'- AA TTA ATA CGA CTC ACT ATA GGG AGA -3' followed by Qiaquick purification. Further amplification was achieved using in vitro transcription reactions with X0.5 g dsDNA and T7 RNA Polymerase (7.5 mM DTT, 40 mM Tris-HCl pH 7.5, 14.25 mM MgCl2, 10 mM NaCl, 2 mM Spermidine, 125 U/ml RNAguard, 2.5 mM dNTPs, 15 U/ml IPPase, 25kU/ml T7 Polymerase) for 16 hours at 42 C. The cRNA was purified (RNeasy) and reverse transcribed using Superscript and random 9-mers and amino-allyl dUTP (42 C for 20 minutes, 10 mM DTT, 50mM Tris-HCl pH 8.3, 75 mM KCl, 8 mM MgCl2, 0.5 mM dNTPs, 0.5 mM aa-dUTP, 5 U/ l Superscript II). The cDNA for each channel was covalently coupled separately with Cy5 and Cy3 monoreactive fluors, respectively, in 1M sodium bicarbonate, pH 9.0, followed by quenching with 4.0 M hydroxylamine. The Cy5 and Cy3 labelled cDNAs were purified with a QIAquick PCR purification kit and the percentage dye incorporation and total cDNA yield was determined spectrophotometrically. Cy5 and Cy3 labelled cDNAs were combined and added to 2 mls 30% formamide with Herring Sperm DNA for hybridization to the microarray. Further details can be found in Castle et al., Genome Biol 2003;4(10):R66, http://genomebiology.com/2003/4/10/R66 , Roberts CJ et al., Science 2000, 287:873-880, and Schadt, Edwards, et al., unpublished. Normalization of single channel data is described in Ying, et al., "Identification of Chromosomal Regions Containing Transcribed Sequences Using Microarrays and Computational Methods" , 2003 Proceedings of the American Statistical Association, Biopharmaceutical Section [CD-ROM], Alexandria, VA: American Statistical Association, 2003. Briefly, an invariant set of probes was selected based on their intensity ranks. Then, a LOESS regression model was fit for Cy5 vs. Cy3 intensities for all probes in the invariant set. Finally, for all probes on the array the Cy5 intensities were normalized to the corresponding Cy3 intensities using prediction values from the regression model. Note that the normalized intensity values given here were used for all analyses reported in the accompanying paper. The ratio values reported here were not used for the analysis described in the manuscript and are not calculated from the normalized intensity values given below. Keywords: other
2004-03-04 | GSE1097 | GEO
Project description:Each colony of A. hydrophila and the OXY-R strain were incubated in 5 mL LB medium overnight, and then diluted in 100 mL fresh LB medium at a ratio of 1:100 and subsequently cultured until the optical density at 600 nm (OD600) reached 1.0. The cultures were harvested via centrifuging for 20 min at 10,000 x g, 4°C, and then the bacterial cells were washed with cold phosphate buffered saline (PBS, pH 7.4) for three times. The cell pellets were resuspending in the 10 mL ultrasonic buffer (50 mM Tris-HCl, pH 7.4, 1 mM PMSF) and disrupted with intermittent sonic oscillation for a total of 30 minutes at 9 seconds intervals on ice. Subsequently, the cell debris and unbroken cells were separated by centrifugation at 8,000 x g for 20 min at 4°C. Then the supernatant was centrifuged at 100,000 x g for 1 h at 4°C in the Optima LE-80 K Ultracentrifuge (Beckman, Palo Alto, CA, USA). After the pellet was dissolved with 2% sodium lauroyl sarcosine (in 50 mM Tris-HCl, pH 7.5) for 40 min at room temperature (RT), the pellets were ultracentrifuged again at 100,000 x g for 1 h at 4°C. Finally, the precipitate was dissolved in an appropriate volume of SDT buffer (4 % SDS, 0.1 M DTT [dithiothreitol], and 0.5 M triethylammonium bicarbonate buffer [TEAB, pH 8.5]). The protein concentration was determined using the Bradford method and then stored at -20°C until subsequent use.The proteins were digested with trypsin after being reduced with DTT and alkylated with Iodoacetamide using a filter-aided sample preparation method (Tanca et al., 2013; Li et al., 2016b). After washing three times with 0.5 M TEAB followed by fractionation using the 10 kDa ultrafiltration system (Millipore, Billerica, MA, USA), about 100 μg digested peptide from each group, including two biological replicates, was taken out for further labeled using TMT isobaric and isotopic mass-tagging kits (Thermo Fisher Scientific, MA, USA), which was performed according to instructions from the kit.
2018-11-23 | PXD009622 | Pride
Project description:Samples were purchased from Clontech as mRNA. Hybridization material was generated through a random-priming amplification procedure (RP-AMP) using primers with a random sequence at the 3' end and a fixed motif at the 5' end. shDNP256 (first strand synthesis): 5'- TAG ATG CTG TTG NNN NNN NNN -3' shT7N9 (second strand synthesis): 5'- ACT ATA GGG AGA NNN NNN NNN -3' 1.5 g of mRNA was reverse-transcribed with Superscript II and the DP256 random primer for 20 minutes at 42 C (10 mM DTT, 50 mM Tris-HCl pH 8.3, 75 mM KCl, 8 mM MgCl2, 0.5 mM dNTPs, 5 U/ l Superscript II). The RNA was degraded with the addition of 20 l volume of 0.5N sodium hydroxide and 0.25 M EDTA for 20 minutes at 65 C. The single stranded cDNA was purified using a commercial kit (Qiagen Qiaquick). The resulting product of single stranded cDNA was placed in its entirety in a second strand reaction. Second strand synthesis reactions utilized shT7N9 random primer and the Klenow fragment of DNA polymerase utilizing standard reaction conditions (37 C for 60 minutes, 0.2 mM DTT, 2.1 mM Tris-HCl pH 7.9, 2.1 mM MgCl2, 10.7 mM NaCl, 1.07 mM dNTPs, 0.1U/ l Klenow), followed by another Qiaquick purification. Multiple polymerase chain reactions were run using 0.15 g of double stranded DNA and standard reaction conditions. Amplification was achieved using 10 cycles of PCR with the DP256 and T7 primers (20 mM Tris-HCl pH 8.4, 50 mM KCl, 0.01 mM dNTPs, 1.5 mM MgCl2, 0.01 U/ l Taq Polymerase) DP256: 5'- GTT CGA GAC CTC TAG ATG CTG TTG -3' T7: 5'- AA TTA ATA CGA CTC ACT ATA GGG AGA -3' followed by Qiaquick purification. Further amplification was achieved using in vitro transcription reactions with X0.5 g dsDNA and T7 RNA Polymerase (7.5 mM DTT, 40 mM Tris-HCl pH 7.5, 14.25 mM MgCl2, 10 mM NaCl, 2 mM Spermidine, 125 U/ml RNAguard, 2.5 mM dNTPs, 15 U/ml IPPase, 25kU/ml T7 Polymerase) for 16 hours at 42 C. The cRNA was purified (RNeasy) and reverse transcribed using Superscript and random 9-mers and amino-allyl dUTP (42 C for 20 minutes, 10 mM DTT, 50mM Tris-HCl pH 8.3, 75 mM KCl, 8 mM MgCl2, 0.5 mM dNTPs, 0.5 mM aa-dUTP, 5 U/ l Superscript II). The cDNA for each channel was covalently coupled separately with Cy5 and Cy3 monoreactive fluors, respectively, in 1M sodium bicarbonate, pH 9.0, followed by quenching with 4.0 M hydroxylamine. The Cy5 and Cy3 labelled cDNAs were purified with a QIAquick PCR purification kit and the percentage dye incorporation and total cDNA yield was determined spectrophotometrically. Cy5 and Cy3 labelled cDNAs were combined and added to 2 mls 30% formamide with Herring Sperm DNA for hybridization to the microarray. Further details can be found in Castle et al., Genome Biol 2003;4(10):R66, http://genomebiology.com/2003/4/10/R66 , Roberts CJ et al., Science 2000, 287:873-880, and Schadt, Edwards, et al., unpublished. Normalization of single channel data is described in Ying, et al., "Identification of Chromosomal Regions Containing Transcribed Sequences Using Microarrays and Computational Methods" , 2003 Proceedings of the American Statistical Association, Biopharmaceutical Section [CD-ROM], Alexandria, VA: American Statistical Association, 2003. Briefly, an invariant set of probes was selected based on their intensity ranks. Then, a LOESS regression model was fit for Cy5 vs. Cy3 intensities for all probes in the invariant set. Finally, for all probes on the array the Cy5 intensities were normalized to the corresponding Cy3 intensities using prediction values from the regression model. Note that the normalized intensity values given here were used for all analyses reported in the accompanying paper. The ratio values reported here were not used for the analysis described in the manuscript and are not calculated from the normalized intensity values given below.
2004-03-03 | E-GEOD-1097 | biostudies-arrayexpress
Project description:T. cruzi epimastigotes in the logarithmic growth phase (3×106 cells mL-1) were incubated for 12h with bortezomib (1.8 µM), GNF6702 (2.9 µM) or compound 1 (24 µM), equivalent to 8× the EC50 values of each compound. Controls were incubated in the presence of diluent (DMSO). Cells were harvested by centrifugation (1912g, 15 min, 4 °C) and washed with ice-cold PBS (1912g, 5 min, 4 °C), and finally, the cell pellets were resuspended in 1.5 mL of ice-cold lysis buffer (1 mM EDTA, 1 mM DTT, 100 μM TLCK, and 1× Roche EDTA-free cOmplete protease inhibitor cocktail in 50 mM potassium phosphate buffer, pH 7.4). Cell suspensions were submitted to 3 freeze–thaw cycles in a dry ice/ethanol bath to biologically inactivate the parasites and then lysed using the One ShotTM Cell disruptor (Constant Systems, UK) at 30 kpsi.
2022-02-17 | PXD027524 | Pride
Project description:The aim of the project was to purify Xenopus replisome from replicationg chromatin assembled in Xenopus laevis egg extract. To this end recombinant Cdc45-TEV-His10-FLAG5 was expressed in bacteria and purified. 4 ml of Xenopus laevis egg extract was activated into interphase and supplemented with 10 ng/µl of demembranated sperm DNA, 70 nM recombinant Cdc45, 40 µM aphidicolin, 5 mM caffeine and incubated at 23°C for 60 min. Chromatin was isolated in ANIB100 buffer (50 mM HEPES pH 7.6, 100 mM KOAc, 10 mM MgOAc, 2.5 mM Mg-ATP, 0.5 mM spermidine, 0.3 mM spermine, 1 µg/ml of each aprotinin, leupeptin and pepstatin, 25 mM β-glycerophosphate, 0.1 mM Na3VO4 and 10 mM 2-chloroacetamide) as described previously (Gillespie, Gambus et al. 2012). Chromatin pellets re-suspended in ANIB100 containing 20% sucrose. Protein complexes were released from chromatin by digestion with 4 U/µl benzonase nuclease (E1014-25KU, Sigma) and sonicated for 5 min using a sonicator with settings: 30 sec on, 30 sec off, low power (Bioruptor Diagenode UCD-200). Immunoprecipitation was performed using 100 µl of anti-FLAG M2 magnetic beads (Sigma-Aldrich). Before elution the sample was washed four times with 1 ml of ANIB100 20% sucrose, ANIB100 20% sucrose 0.1% Triton X-100, ANIB100 and elution buffer (25 mM HEPES pH 7.5, 100 mM KAc, 5 mM MgAc, 1 mM ATP and 0.02% NP-40), respectively. The sample was eluted adding 250 µM 3xFLAG peptide (Stratech) to 200 µl of elution buffer and a small proportion of it analysed by mass spectrometry.
2023-10-27 | PXD044422 | Pride
Project description:Sample preparation: P-AMPK+AMP, P-AMPK+ATPγS, and AMPK+ATPγS protein samples were crosslinked in HBST buffer (25 mM HEPES pH 7.5 at room temperature, 200 mM NaCL, and 1 mM TCEP). Non-crosslinked negative controls were generated using the same procedure without the addition of DSSO. Reactions were initiated by spiking 1 uL of 75 mM DSSO (Thermo-Fisher) in DMSO into a 50 uL solution containing 10 uM protein and mixing. The final molar ratio of crosslinker:protein was 150:1. The reactions were incubated at 25°C for 45 minutes prior to being quenched by the addition of Tris pH 8.0 to a final concentration of 50 mM. Each crosslink reaction was done in triplicate and the reaction replicates were pooled after quenching. 10 μL samples of the pooled samples were loaded for SDS-PAGE analysis with Coomassie staining to confirm the presence of crosslinked protein. The remaining 140 μL of crosslinked and non-crosslinked samples were then acetone precipitated at -20°C overnight and the protein was pelleted by centrifugation at 16,000 rcf for 5 minutes at 4°C. After decanting, the pellets were dried for 15 minutes at room temperature before being resuspended in 12.5 uL of resuspension buffer (50 mM ammonium bicarbonate, 8M urea, pH 8.0). ProteaseMAX (Promega) was added to 0.02% and the solutions were mixed on an orbital shaker operating at 400 RPM for 5 minutes. After resuspension, 87.5 uL of digestion buffer (50 mM ammonium bicarbonate, pH 8.0) was added. Cysteines in the protein samples were reduced and akylated as follows. DTT was added to 5 mM final concentration and the protein solutions were incubated at 56°C in an orbital shaker operating at 400 RPM and for 20 minutes. After reduction, 2.7 uL of 550 mM iodoacetamide was added and the solutions were incubated in the dark at room temperature for 15 minutes. Reduced and alkylated protein solutions were digested using trypsin at a ratio of 1:200 (w/w trypsin:protein) and incubating at 37°C. After overnight incubation at 37°C, the samples were acidified by the addition of trifluoroacetic acid (TFA, Thermo-Fischer) to 1%. Samples were then frozen and stored at -20°C until analysis.
2021-07-08 | PXD019017 | Pride
Project description:Purified ZPR1 protein was incubated with purified NleE at 37℃ in 30 µL of methylation buffer (50 mM Tris-HCl pH 7.5, 150 mM NaCl, 5 mM DTT, 0.1% NP-40 and 0.8 mM S-Adenosyl methionine) for 30 min.
2023-05-23 | PXD042457 | iProX
Project description:Ten 15 cm2 plates of HEK293 cells stably expressing TAP-vector, TAP-CSAG1, or TAP-CSAG2 were lysed with TAP lysis buffer (10% (v/v) glycerol, 50 mM HEPES-KOH pH 7.5, 100 mM KCl, 2 mM EDTA, 0.1% (v/v) NP-40, 10 mM NaF, 0.25 mM Na3VO4, 50 mM β-glyerolphosphate, 2 mM DTT, and 1X protease inhibitor cocktail (Sigma)) and cleared supernatants were bound to IgG-Sepharose beads (GE Amersham) and then washed in lysis buffer and TEV buffer (10 mM HEPES-KOH pH 8.0, 150 mM NaCl, 0.1% (v/v) NP-40, 0.5 mM EDTA, 1 mM DTT, and 1X protease inhibitor cocktail). Protein complexes were cleaved off the beads by TEV protease (Sigma) and incubated with calmodulin-Sepharose beads (GE Amersham) in calmodulin binding buffer (10 mM HEPES-KOH pH 8.0, 150 mM NaCl, 1 mM Mg acetate, 1 mM imidazole, 0.1% (v/v) NP-40, 6 mM CaCl2, 10 mM 2-mercaptoethanol) and then washed in calmodulin rinse buffer (50 mM Ammonium bicarbonate pH 8.0, 75 mM NaCl, 1 mM Mg Acetate, 1 mM Imidazole, 2 mM CaCl2) before eluted with SDS sample buffer, subjected to SDS-PAGE, and stained with GelCode Blue stain (Thermo Fisher Scientific) before protein identification by LC-MS/MS.
2020-09-01 | PXD020231 | Pride