Identification of ALK3-associated proteins
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo Sapiens
SUBMITTER: 
Zeyu Cai
PROVIDER: PXD037210 | iProX | Sat Oct 08 00:00:00 GMT+01:00 2022
REPOSITORIES: iProX
Similar Datasets
Project description:Immunoaffinity Purifications of Human Argonaute Twelve hours after transfections with mock or with miR-124, we washed each 15-cm plate once with phosphate-buffered saline (usually two plates were used per IP), then added 1 ml of 4 C lysis buffer (150 mM KCl, 25 mM Tris-HCl [pH 7.4], 5 mM Na-EDTA [pH 8.0], 0.5% Nonidet P-40, 0.5 mM DTT, 10 ul protease inhibitor cocktail [Pierce Cat# 78437], 100 U/ml SUPERaseIn [Ambion Cat# AM2694]). Following a 30-min incubation at 4 C, we scraped the plates, combined the lysates, and then spun them at 4 C for 30 min at 14,000 RPM in a microcentrifuge. We collected the supernatant and filtered it through a 0.45-um syringe filter. We froze an aliquot of lysate in liquid nitrogen for reference RNA isolation. We then added 0.22 mg/ml heparin to the lysate. We mixed the lysate with 2.5 mg of Dynal m-280 streptavidin beads (250 ul from original storage solution) coupled to biotinylated 4F9 ago antibody (~12.5 ug), which we equilibrated immediately prior to use by washing twice with 1 ml of lysis buffer. We incubated the beads with the lysate for 2 h at 4 C and then washed the beads twice with 1.25 ml of ice-cold lysis buffer for 5-min each. Five percent of the beads were frozen for SDS PAGE analysis after the second wash. RNA was extracted directly from the remaining beads using lysis buffer from Invitrogen's Micro-to-Midi kit (Invitrogen Cat# 12183-018). We purified RNA from the lysate and RNA extracted from the beads with the Micro-to-Midi kit as per vender's instructions, except that the percentage isopropanol used for binding to the column was 70%, instead of 33%, to promote the binding of small RNAs. RNA was amplified with ambion kit 1755. RNA from total cell lysate was labeled with cy3 and IPd RNA was labeled with cy5
2009-11-10 | GSE18834 | GEO
Project description:Flag-YBX1 overexpressed T24 cells pellets were resuspended with 2 volume of lysis buffer (150 mM KCl, 10 mM HEPES pH 7.6, 2 mM EDTA, 0.5% NP-40, 0.5 mM DTT, 1:100 protease inhibitor cocktail, 400 U/ml RNase inhibitor), and incubated at 4 °C for 30 min with rotation. Then the lysate was centrifuged at 15 000 g for 20 min. Before incubating the lysate with Flag beads, 100ul were taken as input. The anti-Flag M2 magnetic beads (Sigma, 10 μl per mg lysate) were washed with NT2 buffer (200 mM NaCl, 50 mM HEPES pH 7.6, 2 mM EDTA, 0.05% NP-40, 0.5 mM DTT, 200 U/ml RNase inhibitor) four times. Cell lysate was mixed with M2 beads and incubated at 4 °C for 4 h with rotation. The beads were washed two times with 1 ml ice-cold NT2 buffer. Then the beads were subject to Micrococal nuclease (NEB) digestion (1:1 000 000 dilution) for 8 min at 37 °C. The beads were cooled on ice immediately for 5 min and washed two times with 1 ml ice-cold 1× PNK+EGTA buffer (50 mM Tris-HCl pH 7.5, 20 mM EDTA, 0.05% NP-40, 200 U/ml RNase inhibitor) and two times with 1 ml ice-cold 1× PK buffer (50 mM NaCl, 100 mM Tris-HCl pH 7.5, 10 mM EDTA, 0.2% SDS, 200 U/ml RNase inhibitor). Then the beads were digested with 200 μl pre-heated (20 min at 50 °C) Proteinase K and RNAs were extracted with an equal volume of Acid-Phenol: Chloroform, pH 4.5 (Ambion). The RNAs were subjected to rRNA removal and Bisseq. The libraries were sequenced on the Illumina HiSeq X-Ten platform at Novogene (Tianjin, CA) with paired-end 150 bp read length.The m5C sites were called using meRanCall from meRanTK (FDR < 0.01).
2019-07-02 | GSE133625 | GEO
Project description:To identify the potential interaction protein that interacts with BCAT1 by IP-MS, we established the stable cell line with vector and BCAT1 in AGS. Then ten million cells were collected lysed in ice-cold 0.1% NP-40 buffer (50 mM Na2HPO4, pH 7.5, 150 mM NaCl) with protease inhibitors cocktail (Sigma, p8340). The supernatants were collected by centrifugation and incubated with 10 µL Anti Flag‐beads (Sigma, A2220at 4°C for overnight. After incubation, beads were washed with lysis buffer for 3 times. Precipitates were resuspended in 1 × SDS loading buffer and separated by SDS-PAGE (polyacrylamide gel electrophoresis). Then cut off (about 1cm2) gel for trypsin hydrolysis and collected and dried the peptide for MS analysis (Thermo Fisher Q Exactive).
2024-11-15 | PXD041556 | Pride
Project description:Immunoaffinity Purifications of Human Argonaute Twelve hours after transfections with mock or with miR-124, we washed each 15-cm plate once with phosphate-buffered saline (usually two plates were used per IP), then added 1 ml of 4 C lysis buffer (150 mM KCl, 25 mM Tris-HCl [pH 7.4], 5 mM Na-EDTA [pH 8.0], 0.5% Nonidet P-40, 0.5 mM DTT, 10 ul protease inhibitor cocktail [Pierce Cat# 78437], 100 U/ml SUPERaseIn [Ambion Cat# AM2694]). Following a 30-min incubation at 4 C, we scraped the plates, combined the lysates, and then spun them at 4 C for 30 min at 14,000 RPM in a microcentrifuge. We collected the supernatant and filtered it through a 0.45-um syringe filter. We froze an aliquot of lysate in liquid nitrogen for reference RNA isolation. We then added 0.22 mg/ml heparin to the lysate. We mixed the lysate with 2.5 mg of Dynal m-280 streptavidin beads (250 ul from original storage solution) coupled to biotinylated 4F9 ago antibody (~12.5 ug), which we equilibrated immediately prior to use by washing twice with 1 ml of lysis buffer. We incubated the beads with the lysate for 2 h at 4 C and then washed the beads twice with 1.25 ml of ice-cold lysis buffer for 5-min each. Five percent of the beads were frozen for SDS PAGE analysis after the second wash. RNA was extracted directly from the remaining beads using lysis buffer from Invitrogen's Micro-to-Midi kit (Invitrogen Cat# 12183-018). We purified RNA from the lysate and RNA extracted from the beads with the Micro-to-Midi kit as per vender's instructions, except that the percentage isopropanol used for binding to the column was 70%, instead of 33%, to promote the binding of small RNAs. RNA was amplified with ambion kit 1755. RNA from total cell lysate was labeled with cy3 and IPd RNA was labeled with cy5 An all pairs experiment design type is where all labeled extracts are compared to every other labeled extract.
2010-06-20 | E-GEOD-18834 | biostudies-arrayexpress
Project description:The cells were cotransfected with epitope-tagged expression plasmids or empty vector(EV) . Forty-eight hours after transfection, the cells were harvested with 500 μl of lysis buffer (20 mM Tris-HCl, pH=8.0; 100 mM NaCl; 0.5% NP-40; and 1 mM EDTA) supplemented with protease inhibitor cocktail (#04693132001, Roche) and PMSF (#PB0425). The cell lysate was rotated at 4°C for 30 min. After centrifugation at 13 000 × g for 10 min, the supernatants were used for immunoprecipitation (IP). The cell extracts were incubated with anti-Flag antibody (F1804 Sigma) overnight at 4°C, followed by incubation with lysis buffer and washing with 50 μL of protein G agarose resin (Yeasen, 36405ES08) for 3 h. The incubated protein G was washed with lysis buffer at 4°C for 10 min. The cell extracts (50 μL of input) and IP samples were resuspended in 80 μL of SDS buffer, followed by pipetting up and down several times to mix the samples.For mass spectrometry analysis of heterochromatin-associated proteins and murine Nat10-associated proteins, the immunoprecipitate was subjected to 10% Acr-Bis SDS‒PAGE and separated approximately 2 cm from the well. The gel was cut and used for mass spectrometry analysis by the PTM BIO Company (Hangzhou, China).
2025-06-23 | PXD062677 | Pride
Project description:ECL1_1173151: FLAG-IP, HEK293T transfected with pcDNA3.1 vector expressing N-term-3XFLAG tagged GFP
ECL1_1173152: FLAG-IP, HEK293T transfected with pcDNA3.1 vector expressing N-term-3XFLAG tagged GFP
ECL1_1173153: FLAG-IP, HEK293T transfected with pcDNA3.1 vector expressing N-term-3XFLAG tagged CYP1B1
ECL1_1173154: FLAG-IP, HEK293T transfected with pcDNA3.1 vector expressing N-term-3XFLAG tagged CYP1B1
ECL1_1173155: FLAG-IP, HEK293T transfected with pcDNA3.1 vector expressing N-term-3XFLAG tagged CYP1B1 and infected with C.burnetii NMII
ECL1_1173156: FLAG-IP, HEK293T transfected with pcDNA3.1 vector expressing N-term-3XFLAG tagged CYP1B1 and infected with C.burnetii NMII
2024-12-23 | MSV000096725 | MassIVE
Project description:HEK293T cells were transfected with the pcDNA3.1 or LEMD3-FLAG plasmid.Forty-eight hours after transfection, the cells were lysed in lysis buffer (50 mM Tris-HCl [pH=7.4], 150 mM NaCl, 2 mM EDTA, and 0.3% NP-40). The cell lysate samples were incubated with anti-FLAG M2 affinity gel (A2220, Sigma‒Aldrich) according to the manufacturer’s instructions. The anti-FLAG M2 affinity gel-bound proteins were eluted with FLAG peptide (F3290, Sigma). The final eluent was collected and resolved on an SDS-PAGE gel. The gel was fixed with a 30% ethanol:10% acetic acid solution, washed with 10% ethanol, and then subjected to LC‒MS/MS. Samples from HEK293T cells transfected with the pcDNA3.1 plasmid were used as the negative control.
| PXD067510 |
Project description:The CLIP procedures were conducted using HeLa cells according to the previous study (Liu et al., 2016) with slight modifications. Briefly, 4 plates of HeLa cells in 15 cm dishes were transfected with pPB/ALKBH3 plasmid for 48 h to reach about 90% cell confluency. After washing twice with ice-cold PBS, cells were irradiated twice with 400 mJ/cm2 at 254 nm by Stratalinker on ice. Cells were lysed in high salt lysis buffer (300 mM NaCl, 0.2% NP-40, 20 mM Tris-HCl PH 7.6, 0.5 mM DTT, protease inhibitor cocktail (1 tablet/50 ml), and RNase inhibitor (1:200)) at 4°C for 30 min. Supernatant was collected after centrifuged at 17,000 g at 4°C for 15 min and further treated with 1 U RNase T1 for 15 min at 24 °C. After centrifugation and filtration through 0.22 µM filter, 10% supernatant was collected as input for further sequencing analysis. Anti-Flag M2 beads (Sigma-Aldrich, St. Louis, MO, 80 μl) were washed three times with lysis buffer and incubated with the filtered supernatant at 4°C for 4 hrs. After removing the flow through by magnetic rack, beads and input were further incubated with 10 U RNase T1 exactly for 8 min. Samples were treated with 95 µL commercial PNK buffer and 0.5 U PNK for 15 min at 37 °C. After treatments, final concentration of 100 µM ATP and 1 U PNK were added and incubated at 37 °C for another 30 min. The RNA/protein complexes were eluted by NuPAGE 1 × loading buffer and fractionated by neutral NuPAGE 4–12% bis-tris gel. After cutting the gel, RNAs were recovered by proteinase K digestion in proteinase K buffer, followed by phenol/chloroform extraction using glycogen as carrier. The RNA fragments were ligated to adapter and established library by NEB small RNA library preparation kit (E7330S).
2022-03-01 | GSE112625 | GEO
Project description:For modified iCLIP experiment, 4SU was used for crosslinking as described in published protocol (citation is bellow) and the RNase conditions were optimised to ensure efficient RNase I-dependent fragmentation. In detail, HEK293T cells were grown on 10 cm 2 dishes, incubated for 8 h with 100 M 4SU and crosslinked with 2x 400mJ/cm 2 365nm UV light. Protein A Dynabeads were used for immunoprecipitations (IP). 80 l of beads were washed in iCLIP lysis buffer (50mM Tris-HCl pH 7.4, 100 mM NaCl, 1% NP-40, 0.1% SDS, 0.5% sodium deoxycholate). For the preparation of the cell lysate, 2 million cells were lysed in 1 ml of iCLIP lysis buffer (50 mM Tris-HCl pH 7.4, 100 mM NaCl, 1% NP-40, 0.1% SDS, 0.5% sodium deoxycholate) buffer, and the remaining cell pellet was dissolved in 50 L MSB lysis buffer (as above). After the pellet had dissolved, the mixture was diluted with CLIP lysis buffer to 1000 l and an additional centrifugation was performed. Lysates were pooled (2ml total volume) and incubated with 4 U/ml of RNase I and 2 l antiRNase (1/1000, AM2690, Thermo Fisher) at 37C for 3 min, and centrifuged. We took care to prepare the initial dilution of RNase in water, since we found that RNase I gradually loses its activity when diluted in the lysis buffer. 1.5 ml of the supernatant was then added to the beads and incubated at 4C for 4 h. The rest of the protocol was identical to the published protocol (see bellow). Huppertz I, Attig J, D'Ambrogio A, Easton LE, Sibley CR, Sugimoto Y, Tajnik M, Knig J, Ule J: iCLIP: protein-RNA interactions at nucleotide resolution. Methods 2014, 65:274-287.
2016-11-24 | E-MTAB-5027 | biostudies-arrayexpress
Project description:Potential miR-202 targets were identified using a targetome-wide RIP-based microarray. HeLa cells were transfected with either a miR-202 mimic or a scrambled single-stranded RNA negative control. RNA was isolated from total cell lysate prior to IP and from antibody-immobilized Protein G agarose beads-RNP complexes (post-IP). Ribonucleoprotein IP was performed using the RIP-Assay kit for microRNA (MBL) according to the protocol described by the manufacturer. Briefly, anti-EIF2C2/Ago2 monoclonal antibody (Novus Biologicals, LLC) was incubated with Protein G plus agarose beads (Pierce) at 4M-BM-0C overnight to prepare antibody-immobilized beads. 20 million cells were harvested and washed four times with ice-cold DEPC-treated PBS. The cell pellet was lysed with 500 M-NM-<l of lysis buffer and the supernatant was incubated with Protein G agarose beads without antibody to reduce nonspecific adsorption. The cell lysate was then transferred into a tube containing antibody-immobilized Protein G agarose beads and incubated for 3 hours at 4M-BM-0C. Genome-wide expression levels were analyzed in total RNA samples from total cell lysate and antibody-immobilized Protein G agarose beads-RNP complexes from cells transfected with miR-202 mimic or negative control using the Agilent 44K 60-mer human whole-genome microarray. Signal hybridization and scans were performed by MOGene, LC (St Louis, MO) (run in biological duplicate). The normalized signal intensities of probes from RNP-bead complexes (post-IP fraction) were divided by the signal intensities from total cell lysate (pre-IP fraction) in miR-202 mimic-transfected cells. Transcripts were identified as members of the global miRNA targetome if they exhibited an enrichment fold change > 2.0. From this list, post-IP to pre-IP signal intensity ratios in miR-202 mimic-transfected cells were divided by post-IP to pre-IP signal intensity ratios in NC cells. Transcripts exhibiting normalized signal ratios of > 1.5 were considered to be bound with miR-202 in the RNA-induced silencing complex (RISC), and therefore potential direct miR-202 targets.
2012-12-19 | E-GEOD-42981 | biostudies-arrayexpress