Falcon Probe: A High-Pressure and Robust Sampling Interface for Coupling Lossless Liquid Chromatography Injection with In-Situ Nanoliter-Scale Sample Pretreatment
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo Sapiens
SUBMITTER: 
Qun Fang
PROVIDER: PXD052544 | iProX | Fri May 24 00:00:00 BST 2024
REPOSITORIES: iProX
Publications
Falcon Probe: A High-Pressure and Robust Sampling Interface for Coupling Lossless Liquid Chromatography Injection with In Situ Nanoliter-Scale Sample Pretreatment.
Ying Wei-Xin WX Shi Shao-Wen SW Wang Hui-Feng HF Chen Jian-Bo JB Pan Jian-Zhang JZ Fang Qun Q
Analytical chemistry 20240729 32
With the increasing demand for trace sample analysis, injecting trace samples into liquid chromatography-mass spectrometry (LC-MS) systems with minimal loss has become a major challenge. Herein, we describe an in situ LC-MS analytical probe, the Falcon probe, which integrates multiple functions of high-pressure sample injection without sample loss, high-efficiency LC separation, and electrospray. The main body of the Falcon probe is made of stainless steel and fabricated by the computer numerica ...[more]
Similar Datasets
Project description:IntroductionThe measurement of water-soluble vitamins is essential to diagnose and monitor various vitamin deficiencies. Establishing stability limits for these vitamins is crucial to ensure accurate laboratory testing. This study aimed to assess the stability of commonly measured water-soluble vitamins under different storage conditions to improve the accuracy of water-soluble vitamins measurement.MethodsThe stability of thiamine, riboflavin, nicotinamide, pantothenic acid, pyridoxic acid and pyridoxal, biotin, 5-methyltetrahydrofolic acid (5-MTHF), and ascorbic acid was measured using liquid chromatography-tandem mass spectrometry. We investigated some pre-analytical factors: the effect of different storage temperatures and times variation between serum and plasma samples, and the impact of ice bath on the sample before centrifugation. We evaluated stability based on differences from the baseline.ResultsThiamine, pyridoxal, and ascorbic acid in serum exhibited instability at room temperature and 2-8°C. Riboflavin and 5-MTHF in serum were only stable for up to 48 and 72 h at 2-8°C. However, when stored at -20°C, all water-soluble vitamins remained stable for up to 72 h, whereas at -80°C, stability was maintained for up to 7 days. All vitamins in whole blood, except nicotinamide, were stable for up to 2-4 h when stored in an ice bath.ConclusionsWater-soluble vitamins, such as thiamine, riboflavin, pyridoxal, and ascorbic acid, are unstable at room temperature and 2-8°C. All vitamins were stable for up to 7 days and stored at -80°C. The ice bath improved the stability of whole blood samples before centrifugation. Thus, laboratories should ensure appropriate storage conditions to maintain pre-analytical quality for vitamin measurements.IntroductionThe measurement of water-soluble vitamins is essential to diagnose and monitor various vitamin deficiencies. Establishing stability limits for these vitamins is crucial to ensure accurate laboratory testing. This study aimed to assess the stability of commonly measured water-soluble vitamins under different storage conditions to improve the accuracy of water-soluble vitamins measurement.MethodsThe stability of thiamine, riboflavin, nicotinamide, pantothenic acid, pyridoxic acid and pyridoxal, biotin, 5-methyltetrahydrofolic acid (5-MTHF), and ascorbic acid was measured using liquid chromatography-tandem mass spectrometry. We investigated some pre-analytical factors: the effect of different storage temperatures and times variation between serum and plasma samples, and the impact of ice bath on the sample before centrifugation. We evaluated stability based on differences from the baseline.ResultsThiamine, pyridoxal, and ascorbic acid in serum exhibited instability at room temperature and 2-8°C. Riboflavin and 5-MTHF in serum were only stable for up to 48 and 72 h at 2-8°C. However, when stored at -20°C, all water-soluble vitamins remained stable for up to 72 h, whereas at -80°C, stability was maintained for up to 7 days. All vitamins in whole blood, except nicotinamide, were stable for up to 2-4 h when stored in an ice bath.ConclusionsWater-soluble vitamins, such as thiamine, riboflavin, pyridoxal, and ascorbic acid, are unstable at room temperature and 2-8°C. All vitamins were stable for up to 7 days and stored at -80°C. The ice bath improved the stability of whole blood samples before centrifugation. Thus, laboratories should ensure appropriate storage conditions to maintain pre-analytical quality for vitamin measurements.
| S-EPMC11797916 | biostudies-literature
Project description:Traditionally, nanomaterial profiling using a single-molecule-terminated scanning probe is performed at the vacuum-solid interface often at a few Kelvin, but is not a notion immediately associated with liquid-solid interface at room temperature. Here, using a scanning tunnelling probe functionalized with a single C60 molecule stabilized in a high-density liquid, we resolve low-dimensional surface defects, atomic interfaces and capture Ångstrom-level bond-length variations in single-layer graphene and MoS2. Atom-by-atom controllable imaging contrast is demonstrated at room temperature and the electronic structure of the C60-metal probe complex within the encompassing liquid molecules is clarified using density functional theory. Our findings demonstrates that operating a robust single-molecular probe is not restricted to ultra-high vacuum and cryogenic settings. Hence the scope of high-precision analytics can be extended towards resolving sub-molecular features of organic elements and gauging ambient compatibility of emerging layered materials with atomic-scale sensitivity under experimentally less stringent conditions.
| S-EPMC4990633 | biostudies-literature
Project description:Polymeric nanoparticles have become indispensable in modern society with a wide array of applications ranging from waterborne coatings to drug-carrier-delivery systems. While a large range of techniques exist to determine a multitude of properties of these particles, relating physicochemical properties of the particle to the chemical structure of the intrinsic polymers is still challenging. A novel, highly orthogonal separation system based on comprehensive two-dimensional liquid chromatography (LC × LC) has been developed. The system combines hydrodynamic chromatography (HDC) in the first-dimension to separate the particles based on their size, with ultrahigh-performance size-exclusion chromatography (SEC) in the second dimension to separate the constituting polymer molecules according to their hydrodynamic radius for each of 80 to 100 separated fractions. A chip-based mixer is incorporated to transform the sample by dissolving the separated nanoparticles from the first-dimension online in tetrahydrofuran. The polymer bands are then focused using stationary-phase-assisted modulation to enhance sensitivity, and the water from the first-dimension eluent is largely eliminated to allow interaction-free SEC. Using the developed system, the combined two-dimensional distribution of the particle-size and the molecular-size of a mixture of various polystyrene (PS) and polyacrylate (PACR) nanoparticles has been obtained within 60 min.
| S-EPMC5588091 | biostudies-literature
Project description:Soft X-ray atmospheric pressure photoionization (soft X-ray APPI) as an ionization method in liquid chromatography-mass spectrometry (LC-MS) is presented. The ionization mechanism was examined with selected test compounds in the negative ion mode, using soft X-ray APPI source emitting 4.9 keV photons. Test compounds with an acidic group were ionized by a proton transfer reaction, producing deprotonated molecules ([M - H]-), whereas compounds having positive electron affinity were ionized by a charge exchange reaction, producing negative molecular ions (M-•). Soft X-ray APPI does not require a dopant to achieve high ionization efficiency, which is an advantage compared with vacuum ultraviolet APPI with 10 eV photons, in which a dopant is needed to improve ionization efficiency. The energy of the soft X-ray photons is in the keV range, which is high enough to displace a valence electron and often also inner shell electrons from LC eluents and atmospheric gases, initiating an efficient ionization process in the negative ion mode.
| S-EPMC8382217 | biostudies-literature
Project description:A silica-bound C-butylpyrogallol[4]arene chromatographic stationary phase was prepared and characterised by thermogravimetric analysis, scanning electron microscopy, NMR and mass spectrometry. The chromatographic performance was investigated by using C60 and C70 fullerenes in reverse phase mode via flash column and high-pressure liquid chromatography (HPLC). The resulting new stationary phase was observed to demonstrate size-selective molecular recognition as postulated from our in-silico studies. The silica-bound C-butylpyrogallol[4]arene flash and HPLC stationary phases were able to separate a C60- and C70-fullerene mixture more effectively than an RP-C18 stationary phase. The presence of toluene in the mobile phase plays a significant role in achieving symmetrical peaks in flash column chromatography.
| S-EPMC8198677 | biostudies-literature
Project description:Many chromatographers have observed that the operating pressure can dramatically change the chromatographic retention of solutes. Small molecules show observables changes, yet even more sizable effects are encountered with large biomolecules. With this work, we have explored the use of pressure as a method development parameter to alter the reversed-phase selectivity of peptide and protein separations. An apparatus for the facile manipulation of column pressure was assembled through a two-pump system and postcolumn flow restriction. The primary pump provided an eluent flow through the column, while the secondary pump provided a pressure-modulating flow at a tee junction after the column but ahead of a flow restrictor. Using this setup, we were able to quickly program various constant pressure changes and even pressure gradients. It was reconfirmed that pressure changes impact the retention of large molecules to a much greater degree than small molecules, making it especially interesting to consider the use of pressure to selectively separate solutes of different sizes. The addition of pressure to bring the column operating pressure beyond 500 bar was enough to change the elution order of insulin (a peptide hormone) and cytochrome C (a small serum protein). Moreover, with the proposed setup, it was possible to combine eluent and pressure gradients in the same analytical run. This advanced technique was applied to improve the separation of insulin from one of its forced degradation impurities. We have referred to this method as pressure-enhanced liquid chromatography and believe that it can offer unseen selectivity, starting with peptide and protein reversed-phase separations.
| S-EPMC9178557 | biostudies-literature
Project description:The measurement of endogenous substances that function as biological antioxidants is of importance because the values obtained might be an index of future health. We quantified three water-soluble antioxidants by high-pressure liquid chromatography with electrochemical detection (h.p.l.c.-e.c.). Current-voltage relationships made at various settings of the D2 porous graphite electrode help to identify ascorbic acid, glutathione and uric acid. The antioxidants are determined simultaneously and without need for derivatization. The method is seen to be useful for comparison of normal rat liver with liver that had undergone oxidative stress through ischaemia. Antioxidant levels in liver, kidney, pancreas and intestinal mucosa are presented and compared with literature values. Endogenous contents of oxidized forms of ascorbic acid and glutathione become apparent following exposure of tissue samples to a strong reductant such as 2-mercapthoethanol.
| S-EPMC1136487 | biostudies-other
Project description:The cycle time of a standard liquid chromatography (LC) system is the sum of the time for the chromatographic run and the autosampler injection sequence. Although LC separation times in the 1-10 s range have been demonstrated, injection sequences are commonly >15 s, limiting throughput possible with LC separations. Further, such separations are performed on relatively large bore columns requiring flow rates of ≥5 mL/min, thus generating large volumes of mobile phase waste when used for large scale screening and increasing the difficulty in interfacing to mass spectrometry. Here, a droplet injector system was established that replaces the autosampler with a four-port, two-position valve equipped with a 20 nL internal loop interfaced to a syringe pump and a three-axis positioner to withdraw sample droplets from a well plate. In the system, sample and immiscible fluid are pulled alternately from a well plate into a capillary and then through the injection valve. The valve is actuated when sample fills the loop to allow sequential injection of samples at high throughput. Capillary LC columns with 300 μm inner diameter were used to reduce the consumption of mobile phase and sample. The system achieved 96 separations of 20 nL droplet samples containing 3 components in as little as 8.1 min with 5-s cycle time. This system was coupled to a mass spectrometer through an electrospray ionization source for high-throughput chemical reaction screening.
| S-EPMC11001260 | biostudies-literature
Project description:Hydrogen deuterium exchange coupled with mass spectrometry (HDX-MS) is a powerful technique for the characterization of protein dynamics and protein interactions. Recent technological developments in the HDX-MS field, such as sub-zero LC separations, large-scale data analysis tools, and efficient protein digestion methods, have allowed for the application of HDX-MS to the analysis of multi protein systems in addition to pure protein analysis. Still, high-throughput HDX-MS analysis of complex samples is not widespread because the co-elution of peptides combined with increased peak complexity after labeling makes peak de-convolution extremely difficult. Here, for the first time, we evaluated and optimized long gradient subzero-temperature ultra-high-pressure liquid chromatography (UPLC) separation conditions for the HDX-MS analysis of complex protein samples such as E. coli cell lysate digest. Under the optimized conditions, we identified 1419 deuterated peptides from 320 proteins at -10 °C, which is about 3-fold more when compared with a 15-min gradient separation under the same conditions. Interestingly, our results suggested that the peptides eluted late in the gradient are well-protected by peptide-column interactions at -10 °C so that peptides eluted even at the end of the gradient maintain high levels of deuteration. Overall, our study suggests that the optimized, sub-zero, long-gradient UPLC separation is capable of characterizing thousands of peptides in a single HDX-MS analysis with low back-exchange rates. As a result, this technique holds great potential for characterizing complex samples such as cell lysates using HDX-MS.
| S-EPMC8265693 | biostudies-literature
Project description:A multifunctional liquid chromatography system that performs 1-dimensional, 2-dimensional (strong cation exchange/reverse phase liquid chromatography or SCX/RPLC) separations and online phosphopeptide enrichment using a single binary nanoflow pump has been developed. With a simple operation of a function selection valve equipped with a SCX column and a TiO2 (titanium dioxide) column, a fully automated selection of three different experiment modes was achieved. Because the current system uses essentially the same solvent flow paths, the same trap column, and the same separation column for reverse-phase separation of 1D, 2D, and online phosphopeptides enrichment experiments, the elution time information obtained from these experiments is in excellent agreement, which facilitates correlating peptide information from different experiments. The final reverse-phase separation of the three experiments is completely decoupled from all of the function selection processes; thereby salts or acids from SCX or TiO2 column do not affect the efficiency of the reverse-phase separation.
| S-EPMC3412908 | biostudies-literature