Mass spectrometric identification of colorectal cancer cells
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo Sapiens
SUBMITTER: 
Kai Fu
PROVIDER: PXD063426 | iProX | Tue Apr 29 00:00:00 BST 2025
REPOSITORIES: iProX
Similar Datasets
Project description:MicroRNAs (miRNAs), small (18–22 nucleotides) non-coding RNAs, suppress the translation of target mRNAs by binding to their 3′ untranslated region. Evidence suggests that miRNAs are key regulators of several cellular processes, including angiogenesis. Recent findings indicate that Secreted miRNAs enclosed in exosomes also play an important role in cell–cell communication. To elucidate whether miRNAs secreted from neoplastic cells transfer into endothelial cells and are functionally active in the recipient cells, we investigated the interaction of a leukemia cell line and human umbilical vein endothelial cells (HUVECs). The culture medium was collected and centrifuged at 3000 × g for 15 min. The supernatant was filtered through a 0.22-µm PVDF filter (Millipore). The appropriate volume of Exoquick Exosome Precipitation Solution (System Biosciences, Mountain View, CA, USA) was added to the filtered culture medium and mixed well by inverting. After refrigeration for 12 h, the mixture was centrifuged at 1,500 × g for 30 min and all supernatant was removed by aspiration. Exosome pellets were resuspended with 500 µl of the serum-free AIM V medium (Invitrogen). K562 cells or K562/Cy3-miR-92a cells (K562 cells transfected with Cy3-labeled pre-miR-92a) were pre-cultured in serum-free AIM V medium (Invitrogen). The cells were cultured in 200 ml of AIM V medium (twenty 100 mm culture dishes). For exosome preparation, the culture media were collected and centrifuged at 2,000 × g for 10 min at room temperature, and the supernatant was centrifuged again at 12,000 × g for 30 min at room temperature, then the supernatant was ultracentrifuged at 110,000 × g for 70 min at 4 ºC. The pellets were washed with PBS, after ultracentrifugation, they were used for Microarray analysis.
2012-01-26 | E-GEOD-35256 | biostudies-arrayexpress
Project description:Carfilzomib-sensitive (AMO1) and resistant (AMO1-CFZ) MM cells were grown in RPMI-1640 medium supplemented with 10 % FBS and 0.68 mM L-glutamine, in a humidified incubator at 5% CO2 and 37 °C. The AMO1-CFZ medium was additionally added 90 nM CFZ, while the CFZ sensitive AMO1 cells were added vehicle (0.009 % DMSO) only. AMO1-CFZ was either harvested directly or grown for 1 week in CFZ free medium (vehicle only) prior to harvest. AMO1 and carfilzomib-resistant AMO1-CFZ cells were resuspended in 100 µl 1% sodium deoxycholate, 100 mM Tris-HCl pH 8.5, 10 mM tris(2-carboxyethyl)phosphine (TCEP), 40 mM chloroacetamide (CAA), heated at 90 °C for 45 min and sonicated for 10 cycles (30 s ON/30 s OFF) using a Bioruptor pico sonicator. After centrifugation at 16000 × g for 10 min, 50 µg soluble protein from each sample was added 100 µl 0.1M ammonium bicarbonate, 0.5 µg trypsin and digested overnight at 37°C. Peptides were desalted using C18 spin columns, dried in a speedvac centrifuge and resuspended in 0.1% formic acid prior to MS analysis. Label-free quantitatative (LFQ) LC-MS/MS was performed on a timsTOF Pro (Bruker Daltonics) connected to a nanoElute (Bruker Daltonics) HPLC. Peptides were separated over a Bruker PepSep C18 (75 µm × 15 cm) column with running buffers A (0.1 % formic acid) and B (0.1 % formic acid in acetonitrile) using a 100 min gradient from 2 % B to 40 % B. The timsTof instrument was operated in the DDA PASEF mode with 10 PASEF scans per acquisition cycle and accumulation and ramp times of 100 ms each. The ‘target value’ was set to 20000 and dynamic exclusion was activated and set to 0.4 min. The quadrupole isolation width was set to 2 Th for m/z < 700 and 3 Th for m/z > 800.
2024-06-07 | PXD045439 | Pride
Project description:Using cell sorting technique, we collected Arabidopsis root hair protoplasts (transgenic line harboring root hair specific gene promoter ::GFP, here named GFP) and nonGFP protoplasts( whole root except root hair). Then, we extracted total proteins and RNA for proteome and RNASeq. RNAseq data have already been deposited into NCBI (accession numbers SRR364677 and SRR364678). Total proteins were separated by 1D SDS-PAGE, followed by gel slicing, in gel digested and run ESI-LC-MS/MS on LTQ Orbitrap Velos. We set two biological repeats and each sample was scanned two times (two technique repeats). We then combined all ms/ms raw data from all fractions and technique repeats from one biological sample into one file to indentify proteins by searching Arabidopsis protein database with software Proteome Discoverer (with two searching engines mascot and sequester). Protocol: Protoplasts from EXP7 and non-GFP protoplastswere stored at -80°C, thawed on ice for 5 min, vortexed several times and suspended in 5 x volume of pre-cooled acetone (-20°C) containing 10% (v/v) trichloroacetic acid (TCA) and 0.07% (v/v) 2-mercaptoethanol. Proteins were then precipitated for 2 h at −20°C after thorough mixing. Proteins were collected by centrifuging at 35,000 g (JA-20 108 rotor, Beckman J2-HS) at 4°C for 30 min. The supernatant was removed and the protein pellets were washed three times with cold acetone containing 0.07% (v/v) 2-mercaptoethanol and 1 mMphenylmethanesulfonylfluoride. Protein pellets were dried by lyophilization and stored at -80°C, or immediately extracted using Laemmli buffer (63 mM TrisHCl pH 6.8, 10% glycerol, 2% SDS, 0.0025% bromophenol blue). Protein concentration was determined using Pierce protein assay kit (Pierce, Rockford). Proteins from each sample were separated using a Bis-Tris precast gradient gel (4−16%, Bio-Rad) according to the manufacturer’s instructions. After electrophoresis, the gel was Coomassie-stained using the Colloidal Blue Staining Kit (Invitrogen). The protocol used for in-gel trypsin digestion of proteins in gels was adapted from the method described in Shevchenko et al. (1996). Briefly, protein bands were manually excised and each band was cut into small pieces (~0.5 mm). The gel pieces were washed three times with a solution containing 50% methanol and 5% acetic acid for 2 h, twice with a solution containing 25 mM NH4HCO3 in 50% acetonitrile for 10 min each, and then the gel pieces were dried in a vacuum centrifuge. Reduction of proteins in gel pieces was performed with DTT and alkylation with iodoacetamide, and the gel pieces were washed and dried in a vacuum centrifuge. A trypsin solution in 25 mM NH4HCO3 containing 75 to 100 ng of sequencing grade modified trypsin (Promega) in 25-40 µl was added and incubated with gel pieces for 12-16 h at 37°C. To recover the tryptic peptides, a solution of 30 µl containing 5% formic acid and 50% acetonitril was added to the gel pieces, agitated in a vortex for 30-60 min and withdrawn into a new tube. The recovery was repeated once with 15 µl solution and the resulting two recovers were combined and dried in a vacuum centrifuge. The dried pellet was re-dissolved in 10-20 µl of 0.1% formic acid for LC-MS/MS analysis.
2013-05-28 | PXD000195 | Pride
Project description:Samples were reduced by the addition of TCEP (25 mM final concentration) and incubated at 37 ºC for 10 min. Alkylation was carried out by the addition of iodoacetamide (25 mM final concentration) and incubated at RT for 1 h in the dark. Samples were then digested by the addition of 1:50 LysC (Wako, Japan) in 100 mM triethylammonium bicarbonate (TEAB) followed by incubation at 37 ºC for 6h and then addition of 1:50 trypsin (Thermo) followed by incubation at 37 ºC overnight. The efficiency of sample digestion efficiency was assessed by MS (LTQ XL, Thermo). The samples were then vacuum-dried and resuspended in 100 mM TEAB (100 µL). Samples were then incubated in their respective Tandem Mass Tag™ (TMT) 10-plex reagents (Thermo) for 1 h at RT with agitation. Reactions were quenched by the addition of 5% hydroxylamine for 15 min and each set of samples (treated and vehicle) were pooled in the same tube and dried overnight. The TMTTM-labelled samples were dried and kept at -85 ºC until further analysis.
2021-07-18 | PXD023780 | Pride
Project description:Purpose: The goal of this study was to determine the microRNA (miRNA) content of extracellular vesicles (EVs) derived from murine mesenchymal stem cells (mMSC), and evaluate reproducibility among distinct EV productions. We also aimed at assessing the effect of freeze-drying on EV miRNA content, by performing sequencing on freeze-dried EVs and calculating statistical difference between unmodified and freeze-dried EVs. Methods: mMSC-derived EVs were obtained from mMSC in culture in reduced serum medium Opti-MEM by differential centrifugation, with a final step at 100,000 g for 110 min at 4°C. EV pellets (freeze-dried (n=3) or not (n=2)) were resuspended in Qiazol lysis buffer and RNA was extracted following RNeasy Micro kit. cDNA libraries for sequencing were prepared using the TruSeq Small RNA Sample Preparation Kit. Amplified cDNA constructs were purified on 6 % PAGE gel and DNA molecules corresponding to 15–50 nucleotide transcripts were excised, eluted from gel, and concentrated. Image analyses and base calling were performed using the HiSeq Control Software and Real-Time Analysis component (Illumina). Before statistical analysis, genes with less than 15 reads (cumulating all the analysed samples) were filtered out. Differentially expressed miRNA were identified using three Bioconductor packages: edgeR, DESeq and DESeq2. Results: Considering miRNAs detected with at least 5 counts (in terms of normalised counts), 339 miRNAs were identified and miRNA content was highly conserved among the two batches tested, with 237 miRNAs out of the 339 present in both batches (70%). Statistical analysis did not evidence statistical difference between unmodified EVs (n=2) and freeze-dried EVs (n=3) (DESeq2, p<0.05). No statistical difference was found using other Bioconductor packages DESeq and edgeR. These results indicated conservation of miRNA content following freeze-drying. Conclusion: mMSC-EV miRNA content was comparable between the two EV productions analysed, indicating reproducibility. Some of the miRNAs identified were consistent with previously published results on MSC-derived EVs. Freeze-drying conserved miRNA content.
2019-12-09 | GSE140479 | GEO
Project description:For proteomics analysis, testes of Ube2j2-/- and WT mice were collected on ice, washed once with pre-cooled PBS, dried with absorbent paper, and immediately placed in liquid nitrogen, dry ice, or at -80 ℃. Samples were packed in dry ice and transported to Hangzhou Jingjie Biotechnology Company (PTM Biolabs, Inc.) for whole protein 4D label-free quantitative proteomic determination. Testes of Ube2j2-/- and WT mice were subjected to LC-MS/MS analysis following a standard protocol. The sample was grinded and mixed with lysis buffer (8 M urea, 1% Protease Inhibitor Cocktail III (Merck Millipore, 539134) dissolved in aqueous solution containing buffer salts), followed by sonication on ice using a high intensity ultrasonic processor (Scientz). The remaining debris was removed by centrifugation at 12,000 g at 4 °C for 10 min. Then, the supernatant was collected and the protein concentration was determined with BCA kit (Beyotime Biotechnology, P0011) according to the manufacturer’s instructions. The sample was slowly added to a final concentration of 20% (m/v) trichloroacetic acid (Sigma-Aldrich, T4885) to precipitate proteins, then mixed by vortexing and incubated for 2 h at 4 °C. The precipitate was collected by centrifugation at 4500 x g for 5 min at 4°C. The precipitated protein was washed 3 times with pre-cooled acetone and dried for 1 min. Protein samples were then redissolved in 200 mM TEAB (Triethylammonium bicarbonate buffer, Sigma-Aldrich, T7408) and ultrasonically dispersed. Trypsin was added at 1:50 trypsin-to-protein mass ratio for the first digestion overnight. The sample was reduced with 5 mM dithiothreitol for 60 min at 37 °C and alkylated with 11 mM iodoacetamide for 45 min at room temperature in darkness. Finally, the peptides were desalted using a Strata X SPE column (Phenomenex). The tryptic peptides were fractionated into fractions by high pH reverse-phase HPLC using Agilent 300Extend C18 column (5 μm particles, 4.6 mm ID, 250 mm length). The released peptides were subjected to NSI source followed by tandem mass spectrometry (MS/MS) in Q ExactiveTM Plus (Thermo) coupled online to the UPLC. Peptides were then selected for MS/MS using NCE setting as 28 and the fragments were detected in the Orbitrap at a resolution of 17,500. Maxquant 1.6.15.0 software was used for spectra analysis, database searches, and peptide identification.
2025-06-05 | PXD063637 | Pride
Project description:<p>The sample to be tested was fully ground into powder in the grinder, 50 mg of the sample was freeze-dried, 1000 μL of the extraction solution containing the inner target was added (methanol:acetonitrile:water, 2:2:1, v/v/v, internal standard concentration 20 mg/L) and vortex mixed for 30 s; then add the steel ball to the 45 Hz grinder for 10 min, ultrasonic 10 min; the sample to be tested is obtained after filtration. When detecting metabolites, metabolite determination was performed based on the LC-MS system, which mainly consists of Waters Acquity I-Class PLUS ultra-high performance liquid tandem and Waters Xevo G2-XS QTof high-resolution mass spectrometer. Meanwhile, the Waters Acquity UPLC HSS T3 column (1.8 um 2.1 x 100 mm) was used as the chromatographic column. Positive and negative ion modes were used to determine the metabolites. Mobile phase A: 0.1% formic acid aqueous solution; Mobile phase B: 0.1% acetonitrile formate. The mobile phase conditions of liquid chromatography were as follows: the flow rate was 400 μL/min, 0.0 min: 98% flow A, 2% flow B; 0.25 min: 98% flow A, 2% flow B, 10.0 min: 2% flow A, 98% flow B; 13.0 min: 2% flow A, 98% flow B; 13.1 min: 98% flow A, 2% flow B; 15.0 min: 98% flow A, 2% flow B. MSe mode controlled by acquisition software (MassLynx v4.2, Waters) was used for primary and secondary mass spectrum data acquisition. ESI ion source parameters are as follows: Capillary voltage, 2500 V (positive ion mode) or -2000 V (negative ion mode); Cone hole voltage, 30 V; Ion source temperature, 100 °C; Desolvent temperature, 500 °C; Air flow rate, 50 L/h; Desolvent gas flow rate, 800 L/h; Plastic-nucleus ratio (m/z) collection range 50-1200 m/z. In the qualitative and quantitative analysis of metabolites, the original data collected by MassLynx v4.2 were processed by the Progenesis QI software for peak extraction, peak alignment, and other data, and the metabolites were identified based on the Progenesis QI software online METLIN database. Then, based on the results of the total score, MS2 score, and mass error (ppm), the metabolites were qualitatively determined.</p>
2024-07-12 | MTBLS10002 | MetaboLights
Project description:Proteomic analysis of chick vestibualr hair bundles purified using the twist-off method. See Description.doc. Utricle hair bundles were purified from E20–21 chicks using the twist-off method (Gillespie & Hudspeth J Cell Biol 112, 625-640, 1991; Shin et al. Neuron 53, 371-386, 2007). NuPAGE LDS sample buffer (Invitrogen) with 50 mM dithiothreitol was added to a combined final volume of 80 µl per 100 utricles' worth of bundles; samples were heated to 70°C for 15 min. Epithelial proteins were similarly solubilized with sample buffer. Proteins were separated by running ~1 cm into a NuPAGE 4–12% Bis-Tris gel (1.5 mm x 10 well; one or two lanes per bundle sample); gels were rinsed with water, then stained with Imperial Protein Stain (Thermo Scientific). The 1 cm of gel with separated proteins was manually sliced into six pieces. Gel pieces were transferred to siliconized tubes and washed and destained in 200 µl 50% methanol overnight. The gel pieces were dehydrated in acetonitrile, rehydrated in 30 µl of 10 mM dithiothreitol in 0.1 M ammonium bicarbonate and reduced at room temperature for 0.5 h. The DTT solution was removed and the sample alkylated in 30 µl 50 mM iodoacetamide in 0.1 M ammonium bicarbonate at room temperature for 0.5 h. The reagent was removed and the gel pieces dehydrated in 100 µl acetonitrile. The acetonitrile was removed and the gel pieces rehydrated in 100 µl 0.1 M ammonium bicarbonate. The pieces were dehydrated in 100 µl acetonitrile, the acetonitrile removed and the pieces completely dried by vacuum centrifugation. The gel pieces were rehydrated in 20 ng/µl trypsin (Sigma-Aldrich T6567 proteomics grade, from porcine pancreas, dimethylated) in 50 mM ammonium bicarbonate on ice for 10 min. Any excess enzyme solution was removed and 20 µl 50 mM ammonium bicarbonate added. The sample was digested overnight at 37°C and the peptides formed extracted from the polyacrylamide in two 30 µl aliquots of 50% acetonitrile/5% formic acid. These extracts were combined and evaporated to 15 µl for MS analysis. For the gel slice immediately adjacent to the agarose, peptides were purified away from interfering polymers by SCX. A single experiment's worth of hair bundles or epithelium was analyzed by six LC-MS/MS runs, corresponding to the six gel pieces. The LC-MS/MS system consisted of a Thermo Electron Orbitrap Velos ETD mass spectrometer system with a Protana nanospray ion source, which was interfaced to a reversed-phase capillary column of 8 cm length x 75 µm internal diameter, self-packed with Phenomenex C18 Jupiter of 10 µm particle size. An extract aliquot (7.5 µl) was injected and peptides eluted from the column by an acetonitrile/0.1 M acetic acid gradient at a flow rate of 0.5 µl/min over 1.2 hr. The nanospray ion source was operated at 2.5 kV. The digest was analyzed using the data-dependent capability of the instrument, acquiring—in sequential scans—a single full scan mass spectrum in the Orbitrap detector at 60,000 resolution to determine peptide molecular weights, and 20 product-ion spectra in the ion trap to determine amino acid sequence. MaxQuant version 1.2.2.5 software was used for protein identification and quantitation. The default contaminants file associated with the MaxQuant download was edited to remove entries known to be present in hair bundles (e.g., actin) and to add additional impurities that entered the bundle-purification workflow (keratins, hemoglobins, egg white components). Mass spectrometry data were searched against Ensembl version 66 (released February, 2012) using Andromeda; the Ensembl FASTA file was edited by replacing several sequences with longer or full-length sequences, including actin gamma 1 (NP_001007825.1), actin beta (NP_990849.1), fascin 1 (NP_001171603), fascin 2 (NP_001171209), ATP synthase beta (NP_001026562.1), peptidylprolyl isomerase A (NP_001159798.1), calbindin 2 (NP_990647.1), PDZD7 (XP_003641537.1), espin (XP_417532.3), and CACNA2D2 (XP_427707.3). Protein identifications were reported with an FDR of 1%. If a set of peptides for a protein was identical to or completely contained within that of another protein, MaxQuant groups those proteins together ("redundant groups"); the entry with the largest number of peptides was used to identify the redundant group. Redundant groups that shared more than 20% of their identified peptides were further grouped in our analysis ("shared-peptide groups"); the entry with the greatest intensity associated with it was used to identify the shared-peptide group.
2013-01-08 | PXD000104 | Pride
Project description:The CLIP procedures were conducted using HeLa cells according to the previous study (Liu et al., 2016) with slight modifications. Briefly, 4 plates of HeLa cells in 15 cm dishes were transfected with pPB/ALKBH3 plasmid for 48 h to reach about 90% cell confluency. After washing twice with ice-cold PBS, cells were irradiated twice with 400 mJ/cm2 at 254 nm by Stratalinker on ice. Cells were lysed in high salt lysis buffer (300 mM NaCl, 0.2% NP-40, 20 mM Tris-HCl PH 7.6, 0.5 mM DTT, protease inhibitor cocktail (1 tablet/50 ml), and RNase inhibitor (1:200)) at 4°C for 30 min. Supernatant was collected after centrifuged at 17,000 g at 4°C for 15 min and further treated with 1 U RNase T1 for 15 min at 24 °C. After centrifugation and filtration through 0.22 µM filter, 10% supernatant was collected as input for further sequencing analysis. Anti-Flag M2 beads (Sigma-Aldrich, St. Louis, MO, 80 μl) were washed three times with lysis buffer and incubated with the filtered supernatant at 4°C for 4 hrs. After removing the flow through by magnetic rack, beads and input were further incubated with 10 U RNase T1 exactly for 8 min. Samples were treated with 95 µL commercial PNK buffer and 0.5 U PNK for 15 min at 37 °C. After treatments, final concentration of 100 µM ATP and 1 U PNK were added and incubated at 37 °C for another 30 min. The RNA/protein complexes were eluted by NuPAGE 1 × loading buffer and fractionated by neutral NuPAGE 4–12% bis-tris gel. After cutting the gel, RNAs were recovered by proteinase K digestion in proteinase K buffer, followed by phenol/chloroform extraction using glycogen as carrier. The RNA fragments were ligated to adapter and established library by NEB small RNA library preparation kit (E7330S).
2022-03-01 | GSE112625 | GEO
Project description:The chromatin fraction was isolated from 5x107 HeLa cells. Chromatin was digested in 100 mL of MNase (40 units/ mL ) reaction buffer for 3 min at 37 °C in a thermomixer (1,400 rpm). After addition of 10 L EGTA (25mM) to inactivate MNase, soluble digested chromatin was collected by 13,000 rpm centrifuge for 5 min. 10 mg of Pol II antibody was conjugated to magnetic protein A beads. The supernatant was diluted with 400 mL of NET-2 buffer and pSer2-Pol II antibody-conjugated beads were added. Incubated the IP reaction at 4 °C for 1 hr. The beads were washed with 1 mL of NET-2 buffer six times and 100 mL of 1xPNKT (1xPNK buffer and 0.05% Triton X-100) buffer once. Washed beads were incubated in 50 mL PNK reaction mix (1xPNKT, 1 mM ATP and 0.05 U/ml T4 PNK (NEB)) in Thermomixer at 37 °C, 1,400 rpm for 6 min. Beads were washed with 1 mL of NET-2 buffer once and RNA was extracted with Trizol reagent. RNA was suspended in urea Dye (7M Urea, 1xTBE, 0.1% BPB and 0.1% XC) and resolved on 6% TBU gel (Invitrogen) at 200 V for 5 min. Gels with 30-160 nt RNAs were collected. 0.2 mL tube was prepared with holes made with 25G needle and placed in a 1.5 mL tube. Gel fragments were placed in the layered tube and broken down by centrifugation at 12,000 rpm for 1 min. The small RNAs were eluted from gel using RNA elution buffer (1 M NaOAc and 1 mM EDTA) at 25 °C for 1 hr in Thermomixer (900 rpm). Eluted RNA was purified with SpinX column (Coster) with 2 glass filters (Millipore) and the flow-through RNA was ethanol precipitated.
2019-10-15 | GSE134102 | GEO