LFQ of CML/CEL peptides from E. coli cells
Ontology highlight
ABSTRACT:
ORGANISM(S): Escherichia Coli
SUBMITTER: Hidetaka Kosako
PROVIDER: PXD069131 | JPOST Repository | Mon Jun 22 00:00:00 BST 2026
REPOSITORIES: jPOST
Dataset's files
Items per page: 5 1 - 5 of 12 |
Similar Datasets
Project description:HeLa cells (n=2) were treated with cell culture media containing 2 mM MGO or GO for 2 h and lysed in 6 M guanidine-HCl, 100 mM HEPES-NaOH, pH 7.5, 10 mM TCEP, and 40 mM CAA. The lysates were dissolved by heating and sonication, followed by centrifugation at 20,000 x g for 15 min at 4 ºC. The supernatants were recovered and proteins (300 µg each) purified by methanol–chloroform precipitation were solubilized in 150 μL of 0.1% RapiGest (Waters) in 50 mM triethylammonium bicarbonate. After sonication, the protein solutions were digested overnight with 3 μg trypsin/Lys-C mix (Promega) at 37 ºC. The resulting peptide solutions were diluted 6-fold with HBS (50 mM HEPES-NaOH, pH 7.5, 150 mM NaCl), centrifuged, and used with a PTMScan Carboxymethyl/Carboxyethyl Lysine Motif kit (Cell Signaling Technology). The eluates in 0.15% TFA and 5% acetonitrile were desalted, evaporated, and re-dissolved in 0.1% TFA and 3% acetonitrile. LC-MS/MS analysis of the resultant peptides was performed on a nanoElute 2 coupled with a timsTOF HT mass spectrometer (Bruker). The peptides were separated on a 75-μm inner diameter x 150 mm C18 reversed-phase column (Nikkyo Technos). The mobile phase consisted of 0.1% formic acid in water (solvent A) and 0.1% formic acid in acetonitrile (solvent B). Peptides were loaded onto the column at a flow rate of 0.2 μL/min, starting at 5% B and ramping linearly to 20% B by 40 min, then to 35% B by 60 min, followed by a rapid increase to 95% B at 61 min, where it was held until 65 min. The mass spectrometer was operated in parallel accumulation–serial fragmentation (PASEF) mode. The m/z range for both MS1 and MS2 spectra was 100-1700, and the ion mobility range was 0.6-1.6 V.s/cm3. The ramp time was 100 ms, with a duty cycle of 100%. Each acquisition cycle consisted of 10 PASEF MS2 scans. A polygon filter was applied to the m/z and ion mobility space to exclude low m/z, singly charged ions from precursor selection. The raw data were processed using FragPipe (v22.0). Database searches were performed with MSFragger (v4.1), employing the default parameters of the LFQ-phospho workflow against the UniProt human database (20,454 entries). Carbamidomethylation of cysteine (+57.0215 Da) was set as a fixed modification. The following variable modifications were included: acetylation of the protein N-terminus (+42.0106 Da); oxidation of methionine (+15.9949 Da); and carboxymethylation (+58.0055 Da) or carboxyethylation (+72.0211 Da) of lysine. The resulting identifications were filtered using Philosopher with default parameters (MS Booster was disabled), and IonQuant (v1.10.27) was used for quantification with default software settings.
2025-05-07 | PXD063706 | JPOST Repository
Project description:WT or DJ-1 KO HeLa cells (n=3) were lysed in 500 μL of 6 M guanidine-HCl, 100 mM HEPES-NaOH, pH 7.5, 10 mM TCEP, and 40 mM CAA. The lysates were dissolved by heating and sonication, followed by centrifugation at 20,000 x g for 15 min at 4 ºC. The supernatants were recovered and proteins (1 mg each) purified by methanol–chloroform precipitation were solubilized in 150 μL of 0.1% RapiGest (Waters) in 50 mM triethylammonium bicarbonate. After sonication, the protein solutions were digested overnight with 10 μg trypsin/Lys-C mix (Promega) at 37 ºC. The resulting peptide solutions were diluted 6-fold with HBS (50 mM HEPES-NaOH, pH 7.5, 150 mM NaCl), centrifuged, and used with a PTMScan Carboxymethyl/Carboxyethyl Lysine Motif kit (Cell Signaling Technology). The eluates in 0.15% TFA and 5% acetonitrile were desalted, evaporated, and re-dissolved in 0.1% TFA and 3% acetonitrile. LC-MS/MS analysis of the resultant peptides was performed on a nanoElute 2 coupled with a timsTOF HT mass spectrometer (Bruker). The peptides were separated on a 75-μm inner diameter x 150 mm C18 reversed-phase column (Nikkyo Technos). The mobile phase consisted of 0.1% formic acid in water (solvent A) and 0.1% formic acid in acetonitrile (solvent B). Peptides were loaded onto the column at a flow rate of 0.2 μL/min, starting at 5% B and ramping linearly to 20% B by 40 min, then to 35% B by 60 min, followed by a rapid increase to 95% B at 61 min, where it was held until 65 min. The mass spectrometer was operated in parallel accumulation–serial fragmentation (PASEF) mode. The m/z range for both MS1 and MS2 spectra was 100-1700, and the ion mobility range was 0.6-1.6 V.s/cm3. The ramp time was 100 ms, with a duty cycle of 100%. Each acquisition cycle consisted of 10 PASEF MS2 scans. A polygon filter was applied to the m/z and ion mobility space to exclude low m/z, singly charged ions from precursor selection. The raw data were processed using FragPipe (v22.0). Database searches were performed with MSFragger (v4.1), employing the default parameters of the LFQ-phospho workflow against the UniProt human database (20,454 entries). Carbamidomethylation of cysteine (+57.0215 Da) was set as a fixed modification. The following variable modifications were included: acetylation of the protein N-terminus (+42.0106 Da); oxidation of methionine (+15.9949 Da); and carboxymethylation (+58.0055 Da) or carboxyethylation (+72.0211 Da) of lysine. The resulting identifications were filtered using Philosopher with default parameters (MS Booster was disabled), and IonQuant (v1.10.27) was used for quantification with default software settings.
2025-05-07 | PXD063705 | JPOST Repository
Project description:WT or DJ-1 KO HeLa cells (n=3) were lysed in 500 μL of 6 M guanidine-HCl, 100 mM HEPES-NaOH, pH 7.5, 10 mM TCEP, and 40 mM CAA. The lysates were dissolved by heating and sonication, followed by centrifugation at 20,000 x g for 15 min at 4 ºC. The supernatants were recovered and proteins (1 mg each) purified by methanol–chloroform precipitation were solubilized in 150 μL of 0.1% RapiGest (Waters) in 50 mM triethylammonium bicarbonate. After sonication, the protein solutions were digested overnight with 10 μg trypsin/Lys-C mix (Promega) at 37 ºC. The resulting peptide solutions were acidified with TFA, centrifuged, and used with a High-Select Fe-NTA phosphopeptide enrichment kit (Thermo Fisher Scientific). The eluates were acidified, desalted using GL-Tip SDB (GL Sciences), evaporated in a SpeedVac concentrator, and redissolved in 0.1% TFA and 3% acetonitrile. LC-MS/MS analysis of the resultant peptides was performed on a nanoElute 2 coupled with a timsTOF HT mass spectrometer (Bruker). The peptides were separated on a 75-μm inner diameter x 150 mm C18 reversed-phase column (Nikkyo Technos). The mobile phase consisted of 0.1% formic acid in water (solvent A) and 0.1% formic acid in acetonitrile (solvent B). Peptides were loaded onto the column at a flow rate of 0.2 μL/min starting at 3% B, which was linearly ramped to 32% B over 90 min, then raised to 95% B at 91 min, and held at that level until 101 min. The mass spectrometer was operated in parallel accumulation–serial fragmentation (PASEF) mode. The m/z range for both MS1 and MS2 spectra was 100-1700, and the ion mobility range was 0.6-1.6 V.s/cm3. The ramp time was 100 ms, with a duty cycle of 100%. Each acquisition cycle consisted of 10 PASEF MS2 scans. A polygon filter was applied to the m/z and ion mobility space to exclude low m/z, singly charged ions from precursor selection. The raw data were processed using FragPipe (v22.0). Database searches were performed with MSFragger (v4.1), employing the default parameters of the LFQ-phospho workflow against the UniProt human database (20,454 entries). Carbamidomethylation of cysteine (+57.0215 Da) was set as a fixed modification. The following variable modifications were included: acetylation of the protein N-terminus (+42.0106 Da); oxidation of methionine (+15.9949 Da); phosphorylation (+79.9663 Da) of serine, threonine, or tyrosine; and 3-phosphoglyceroyl (+167.9824 Da) at lysine. The resulting identifications were filtered using Philosopher with default parameters (MS Booster was disabled), and IonQuant (v1.10.27) was used for quantification with default software settings.
2025-05-07 | PXD063699 | JPOST Repository
Project description:HEK293T cells were transfected with Flag-FGF13 plasmids, and cells were performed with immunoprecipitation by Flag antibody or IgG (CST, 3900, USA) with protein A/G beads (Meck, LSKMAGAG10, USA). Coimmunoprecipitation was carried out in HEK293T cells and visualized with silver staining by using the beyotime fast silver stain kit (P0017S). Then mass spectrometry was used to detect all the proteins connected with Flag-FGF13. The assay was carried by Shanghai Bioprofile Technology Company Ltd. In brief, the gradient consisted of 5~35% (v/v) acetonitrile in 0.1% (v/v) formic acid at a flow rate of 200 nL/min for 10 min, 35~100% (v/v) acetonitrile in 0.1% (v/v) formic acid at a flow rate of 200 nL/min for 2 min and 100% acetonitrile in 0.1% formic acid at a flow rate of 200 nL/min for 8 min. The eluted peptides were ionized and introduced into a Thermo Fisher LTQ Velos Pro mass spectrometer (Thermo Fisher Scientific, Bremen, Germany) using a Proxeon nanoelectrospray ion source. Survey full-scan MS spectra (from m/z 200~1800) were acquired. A full mass spectrum (m/z 200~1800) was followed by fragmentation of the ten most abundant peaks, using 35% of the normalized collision energy for obtaining MS/MS spectra. All peptide assignments were verified by manual inspection. The information about the proteins connected with Flag-FGF13 was summarized in Supplementary materials: Proteins connect with Flag-FGF13.‘’
2025-12-17 | PXD057743 | Pride
Project description:Glands were frozen at -80 ºC immediately after being retrieved and stored under this condition until initiating the proteomics analysis protocol. Glands were washed with cold PBS and immersed in 120 l of homogenization buffer (50 mM Tris-HCl, pH 6.8, 10 mM DTT, 4% (w/v) SDS). Glands were boiled for 5 min, incubated overnight at 4 ºC and centrifuged at 4 ºC and 13000 rpm for 10 min. The whole gland proteome of each gland was concentrated as described elsewhere (Bonzon-Kulichenko, F. Garcia-Marques, M. Trevisan-Herraz and J. Vazquez, Journal of Proteome Research, 2015, 14, 700-710 (DOI:10.1021/pr5007284).Briefly, samples were loaded into an SDS-PAGE gel (0.5 mm-thick, 4% stacking, and 10% resolving) and the electrophoresis process was stopped when the front entered 2 mm into the resolving gel. The unseparated protein bands were then visualized by Coomassie staining, excised and digested at 37 ºC overnight with 500 l of 25 g/l chymotrypsin (Promega) in 100 mM Tris-HCl, pH 7.8 containing 10 mM CaCl2. The cleaved peptides were extracted by incubation for 2 h in 100 mM Tris-HCl, pH 7.8 on shaking, acidized with 1% (v/v) trifluoroacetic acid, desalted onto C18 cartridges (Oasis, Waters Corporation, Milford, MA, USA), and dried down.The analysis of the samples proceeded through liquid chromatography-tandem mass spectrometry (LC-MS/MS) using an Easy nLC 1000 nano-HPLC coupled to a Q-Exactive Orbitrap mass spectrometer (Themo Scientific). Peptides were injected onto a C18 reverse-phase precolumn (Acclaim PepMap100, 75-m i.d., 3-m particle size, 2-cm length, Thermo Scientific), and a reverse-phase analytical column (Acclaim PepMap 100, 75-m, i.d., 3-m particle size, 50-cm length, Thermo Scientific) in buffer A [0.1% formic acid (v/v)] and eluted with a 60 min linear gradient of buffer B [90% acetonitrile, 0.1% formic acid (v/v)], at 200 nL/min. Mass spectrometry (MS) runs consisted of 70000 FT-resolution spectra in the 390-1200 m/z wide range, followed by data-dependent MS/MS spectra of the 15 most intense parent ions acquired along the chromatographic run. High-energy collisional (HCD) fragmentation was performed at 27% of normalized collision energy and the isolation window for the parent ion mass was established at 2 Da.
2022-12-07 | PXD023141 | Pride
Project description:Proteomic analysis of chick vestibualr hair bundles purified using the twist-off method. See Description.doc. Utricle hair bundles were purified from E20–21 chicks using the twist-off method (Gillespie & Hudspeth J Cell Biol 112, 625-640, 1991; Shin et al. Neuron 53, 371-386, 2007). NuPAGE LDS sample buffer (Invitrogen) with 50 mM dithiothreitol was added to a combined final volume of 80 µl per 100 utricles' worth of bundles; samples were heated to 70°C for 15 min. Epithelial proteins were similarly solubilized with sample buffer. Proteins were separated by running ~1 cm into a NuPAGE 4–12% Bis-Tris gel (1.5 mm x 10 well; one or two lanes per bundle sample); gels were rinsed with water, then stained with Imperial Protein Stain (Thermo Scientific). The 1 cm of gel with separated proteins was manually sliced into six pieces. Gel pieces were transferred to siliconized tubes and washed and destained in 200 µl 50% methanol overnight. The gel pieces were dehydrated in acetonitrile, rehydrated in 30 µl of 10 mM dithiothreitol in 0.1 M ammonium bicarbonate and reduced at room temperature for 0.5 h. The DTT solution was removed and the sample alkylated in 30 µl 50 mM iodoacetamide in 0.1 M ammonium bicarbonate at room temperature for 0.5 h. The reagent was removed and the gel pieces dehydrated in 100 µl acetonitrile. The acetonitrile was removed and the gel pieces rehydrated in 100 µl 0.1 M ammonium bicarbonate. The pieces were dehydrated in 100 µl acetonitrile, the acetonitrile removed and the pieces completely dried by vacuum centrifugation. The gel pieces were rehydrated in 20 ng/µl trypsin (Sigma-Aldrich T6567 proteomics grade, from porcine pancreas, dimethylated) in 50 mM ammonium bicarbonate on ice for 10 min. Any excess enzyme solution was removed and 20 µl 50 mM ammonium bicarbonate added. The sample was digested overnight at 37°C and the peptides formed extracted from the polyacrylamide in two 30 µl aliquots of 50% acetonitrile/5% formic acid. These extracts were combined and evaporated to 15 µl for MS analysis. For the gel slice immediately adjacent to the agarose, peptides were purified away from interfering polymers by SCX. A single experiment's worth of hair bundles or epithelium was analyzed by six LC-MS/MS runs, corresponding to the six gel pieces. The LC-MS/MS system consisted of a Thermo Electron Orbitrap Velos ETD mass spectrometer system with a Protana nanospray ion source, which was interfaced to a reversed-phase capillary column of 8 cm length x 75 µm internal diameter, self-packed with Phenomenex C18 Jupiter of 10 µm particle size. An extract aliquot (7.5 µl) was injected and peptides eluted from the column by an acetonitrile/0.1 M acetic acid gradient at a flow rate of 0.5 µl/min over 1.2 hr. The nanospray ion source was operated at 2.5 kV. The digest was analyzed using the data-dependent capability of the instrument, acquiring—in sequential scans—a single full scan mass spectrum in the Orbitrap detector at 60,000 resolution to determine peptide molecular weights, and 20 product-ion spectra in the ion trap to determine amino acid sequence. MaxQuant version 1.2.2.5 software was used for protein identification and quantitation. The default contaminants file associated with the MaxQuant download was edited to remove entries known to be present in hair bundles (e.g., actin) and to add additional impurities that entered the bundle-purification workflow (keratins, hemoglobins, egg white components). Mass spectrometry data were searched against Ensembl version 66 (released February, 2012) using Andromeda; the Ensembl FASTA file was edited by replacing several sequences with longer or full-length sequences, including actin gamma 1 (NP_001007825.1), actin beta (NP_990849.1), fascin 1 (NP_001171603), fascin 2 (NP_001171209), ATP synthase beta (NP_001026562.1), peptidylprolyl isomerase A (NP_001159798.1), calbindin 2 (NP_990647.1), PDZD7 (XP_003641537.1), espin (XP_417532.3), and CACNA2D2 (XP_427707.3). Protein identifications were reported with an FDR of 1%. If a set of peptides for a protein was identical to or completely contained within that of another protein, MaxQuant groups those proteins together ("redundant groups"); the entry with the largest number of peptides was used to identify the redundant group. Redundant groups that shared more than 20% of their identified peptides were further grouped in our analysis ("shared-peptide groups"); the entry with the greatest intensity associated with it was used to identify the shared-peptide group.
2013-01-08 | PXD000104 | Pride
Project description:<p>This study presents untargeted LC–MS/MS metabolomics and lipidomics datasets comparing CON and MAL experimental groups acquired in both positive and negative electrospray ionization modes. For quality control, a pooled QC sample was prepared by mixing equal volumes of all study samples and was analyzed alongside extracted samples. Separation was performed using an Agilent Infinity 1200 UPLC system coupled to an Agilent 6540 Quadrupole Time-of-Flight mass spectrometer (Q-TOF) in data-dependent acquisition (DDA) mode over an m/z range of 50–1000. Chromatographic separation used an Agilent Poroshell column (2.1 × 100 mm, 1.9 μm) with mobile phases (A) 0.1% formic acid in water and (B) 0.1% formic acid in acetonitrile, at 0.4 mL/min, 30 °C, and 10 μL injection volume. The ESI source settings were: gas temperature 250 °C, gas flow 10 L/min, nebulizer 35 psi, sheath gas 250 °C at 11 L/min, capillary 3.5 kV, fragmentor 75 V, and oct RF 750 V; acquisition rate was 2 spectra/s. MS/MS fragmentation used a rolling collision energy of 10–20–40 V. Raw Q-TOF data were processed using Progenesis QI to generate aligned feature tables (m/z, retention time, and intensity; default sensitivity level 3; S/N ≥ 3). Internal standards were removed prior to downstream analysis. Putative annotation was performed using an in-house PMDB combined with HMDB (mass error ≤ 10 ppm; MS/MS match ≥ 35). Features were filtered using a 50% rule, missing values were imputed with minimum values, intensities were sum-normalized, features with QC RSD > 30% were removed, and the matrix was log10-transformed. Statistical analysis included OPLS-DA using the R package ropls (v1.6.2) and significance assessment using VIP > 1 and Student’s t-test (p < 0.05). The deposited files include raw vendor data (.d) for both ion modes and the processed data matrices used for analysis.</p>
2026-01-20 | MTBLS13731 | MetaboLights
Project description:Proteomic analysis of pervanadate-induced tyrosine-phosphorylated proteins in hepatocellular carcinoma WRL 68 cells Protein tyrosine phosphorylation plays critical roles in modulating biological processes such as cellular proliferation, differentiation, migration, apoptosis and metabolism. To profile tyrosine phosphorylated (pTyr) proteins as well as search novel pTyr proteins as cross-talk points among different cellular pathways, we developed a rapid and efficient approach to identify cellular pTyr proteins and their complexes by a combination of subcellular proteomics approach with signal transduction strategies. Human hepatocytic cells from WRL68 cell line were treated with pervanadate (POV), subfractionated into four fractions and then subjected to immunoaffinity purification with anti-pTyr antibody. The eluted mixtures of the anti-pTyr purification were identified by LC-MS/MS. Subcellular fractionation and affinity purification of tyrosine-phosphorylated proteins: WRL68 cells were first grown to 80% confluence in MEM complete medium and then the medium replaced with serum free media. After 15 h, the cells were either untreated or stimulated with 0.1 mM pervanadate (1 mM sodium orthovanadate, 3 mM H2O2) for 10 min. 150-mm cultures of WRL 68 cells were rinsed twice with 4? PBS and then scraped from the dish in 750?l of hypotonic buffer (10 mM Tris, 1 mM NaF, 10 mM IAA, pH 7.5) containing a cocktail of protein inhibitors. After a 20-min incubation on ice, the cells were passed about five times through a 25-g needle. The resulting lysate was subjected to a 15min centrifugation at 1000 rpm at 4?, after which the pellet was resuspended in 250?l of hypotonic buffer and re-extracted by a second round of the trituration and centrifugation. The supernatants of the first and second spins were combined, adjusted to 0.25 M NaCl, and separated into cytosolic (supernatant) and membrane (pellet) fractions bycentrifugation at 19,000 rpm (43,000 g) for 90 min at 4?. All the pellets and total cell lysate were resuspended in RIPA buffer (50 mM Tris-HCl, 150 mM NaCl, 1% Triton X-100, 0.1% SDS, 1% deoxycholic acid sodium) containing 1mM pervanadate with a cocktail of protein inhibitors with sonication aid. Cleared cell lysates were incubated overnight at 4? with 30?l monoclonal anti-phosphotyrosine-agrose (Sigma). Precipitated immune complexes were washed three times with 1×HNTG (20 mM HEPES, 150 mM NaCl, 0.1% Triton X-100, 10% Glycerol, pH 7.5) and then eluted with 100 mM phenyl phosphate (Sigma) in lysis buffer at 4?. Enzyme digestion, mass spectrometry and protein identification: The sample was digested according to the published method. Chromatography was performed using a surveyor LC system (Thermo Finnigan,SanJose,CA) on C18 reverse phase column(RP, 180 µm x 150 mm, BioBasic® C18, 5 µm, Thermo Hypersil-Keystone). The pump flow rate is split 1:100 for a colum flow rate of 1.5 µL/min.The column effluent is directly electrosprayed using the orthogonal metal needle source without further splitting.Mobile phase A is 0.1% formic acid in water,and the B mobile phase is 0.1% formic acid in acetonitrile. The separation of peptides obtained by enzymatic digest of bile sample was achieved with a gradient of 2-80% B over 360 min.The column effluent from the reverse phase column was analyzed by LCQ Deca XP ion-trap mass spectrometer.The micro-electrospray interface uses a 30 µm metal needle that is orthogonal to the inlet of the LCQ.The mass spectrometer was set that one full MS scan was followed by three MS/MS scans on the three most intense ion from the MS spectrum with the following Dynamic Exclusion™ settings: repeat count, 1; repeat duration, 0.5 min; exclusion duration, 3.0 min. The acquired MS/MS spectra were automatically searched against protein database for human proteins (SWISS-PROT/TrEMBL) using the TurboSEQUEST program in the BioWorks™ 3.0 software suite. An accepted SEQUEST result had to have a ?Cn score of at least 0.1 (regardless of charge state) and Xcorr (one charge?1.5, two charges?2.0, three charges?2.5). Single peptides that alone identify a protein were manually validated after meeting the above criteria. Bioinformatics analysis: The pI and MW of the proteins were analyzed using ExPASy proteomics tools accessed from http://cn.expasy.org/tools/#proteome. The grand average hydropathicity (GRAVY) values were determined according to Kyte-Doolittle. The protein subcellular location annotation was from SwissProt &TrEMBL protein database (http://us.expasy.org/sprot/). The protein function family was categorized according to Gene Ontology (GO) annotation terms extracted by InterPro (http://www.ebi.ac.uk./interpro/). The annotation of protein phosphorylation was from SwissProt &TrEMBL protein database (http://us.expasy.org/sprot/) and PhosphoSite (http://www.phosphosite.org). The kinases were annotated according to human kinome. Keywords: other
2005-04-07 | GSE2408 | GEO
Project description:MIADB: a cumulative collection of 172 tandem mass spectrometry (MS/MS) of a vast array of monoterpene indole alkaloids. Samples were analyzed using an Agilent LC-MS system composed of an Agilent 1260 Infinity HPLC coupled to an Agilent 6530 ESI-Q-TOF-MS operating in positive mode. A Sunfire analytical C18 column (150 × 2.1 mm; i.d. 3.5 μm, Waters) was used, with a flow rate of 250 μL/min and a linear gradient from 5% B (A: H2O + 0.1% formic acid, B: MeOH) to 100% B over 30 min. ESI conditions were set with the capillary temperature at 320 °C, source voltage at 3.5 kV, and a sheath gas flow rate of 10 L/min. The divert valve was set to waste for the first 3 min. There were four scan events: positive MS, window from m/z 100−1200, then three data-dependent MS/MS scans of the first, second, and third most intense ions from the first scan event. MS/MS settings were three fixed collision energies (30, 50, and 70 eV), default charge of 1, minimum intensity of 5000 counts, and isolation width of m/z 2. In the positive-ion mode, purine C5H4N4 [M + H]+ ion (m/z 121.050873) and the hexakis(1H,1H,3H-tetrafluoropropoxy)-phosphazene C18H18F24N3O6P3 [M + H]+ ion (m/z 922.009 798) were used as internal lock masses. Full scans were acquired at a resolution of 11 000 (at m/z 922). A permanent MS/MS exclusion list criterion was set to prevent oversampling of the internal calibrant.
2018-12-03 | MTBLS142 | MetaboLights
Project description:Carfilzomib-sensitive (AMO1) and resistant (AMO1-CFZ) MM cells were grown in RPMI-1640 medium supplemented with 10 % FBS and 0.68 mM L-glutamine, in a humidified incubator at 5% CO2 and 37 °C. The AMO1-CFZ medium was additionally added 90 nM CFZ, while the CFZ sensitive AMO1 cells were added vehicle (0.009 % DMSO) only. AMO1-CFZ was either harvested directly or grown for 1 week in CFZ free medium (vehicle only) prior to harvest. AMO1 and carfilzomib-resistant AMO1-CFZ cells were resuspended in 100 µl 1% sodium deoxycholate, 100 mM Tris-HCl pH 8.5, 10 mM tris(2-carboxyethyl)phosphine (TCEP), 40 mM chloroacetamide (CAA), heated at 90 °C for 45 min and sonicated for 10 cycles (30 s ON/30 s OFF) using a Bioruptor pico sonicator. After centrifugation at 16000 × g for 10 min, 50 µg soluble protein from each sample was added 100 µl 0.1M ammonium bicarbonate, 0.5 µg trypsin and digested overnight at 37°C. Peptides were desalted using C18 spin columns, dried in a speedvac centrifuge and resuspended in 0.1% formic acid prior to MS analysis. Label-free quantitatative (LFQ) LC-MS/MS was performed on a timsTOF Pro (Bruker Daltonics) connected to a nanoElute (Bruker Daltonics) HPLC. Peptides were separated over a Bruker PepSep C18 (75 µm × 15 cm) column with running buffers A (0.1 % formic acid) and B (0.1 % formic acid in acetonitrile) using a 100 min gradient from 2 % B to 40 % B. The timsTof instrument was operated in the DDA PASEF mode with 10 PASEF scans per acquisition cycle and accumulation and ramp times of 100 ms each. The ‘target value’ was set to 20000 and dynamic exclusion was activated and set to 0.4 min. The quadrupole isolation width was set to 2 Th for m/z < 700 and 3 Th for m/z > 800.
2024-06-07 | PXD045439 | Pride