Reutilization of scrap tyre for the enhanced removal of phthalate esters from water: immobilization performance, interaction mechanisms, and application
Ontology highlight
ABSTRACT:
PROVIDER: PRJEB64300 | ENA |
REPOSITORIES: ENA
Dataset's files
| Action | DRS | |||
|---|---|---|---|---|
| ERR11705700_1.fastq.gz | Fastqsanger.gz | |||
| ERR11705700_2.fastq.gz | Fastqsanger.gz | |||
| ERR11705701_1.fastq.gz | Fastqsanger.gz | |||
| ERR11705701_2.fastq.gz | Fastqsanger.gz | |||
| ERR11705702_1.fastq.gz | Fastqsanger.gz |
Items per page: 5 1 - 5 of 40 |
Similar Datasets
Project description:The massive usage of phthalate esters (PAEs) has caused serious pollution. Bacterial degradation is a potential strategy to remove PAE contamination. So far, an increasing number of PAE-degrading strains have been isolated, and the catabolism of PAEs has been extensively studied and reviewed. However, the investigation into the bacterial PAE uptake process has received limited attention and remains preliminary. PAEs can interact spontaneously with compounds like peptidoglycan, lipopolysaccharides, and lipids on the bacterial cell envelope to migrate inside. However, this process compromises the structural integrity of the cells and causes disruptions. Thus, membrane protein-facilitated transport seems to be the main assimilation strategy in bacteria. So far, only an ATP-binding-cassette transporter PatDABC was proven to transport PAEs across the cytomembrane in a Gram-positive bacterium Rhodococcus jostii RHA1. Other cytomembrane proteins like major facilitator superfamily (MFS) proteins and outer membrane proteins in cell walls like FadL family channels, TonB-dependent transporters, and OmpW family proteins were only reported to facilitate the transport of PAEs analogs such as monoaromatic and polyaromatic hydrocarbons. The functions of these proteins in the intracellular transport of PAEs in bacteria await characterization and it is a promising avenue for future research on enhancing bacterial degradation of PAEs. KEY POINTS: • Membrane proteins on the bacterial cell envelope may be PAE transporters. • Most potential transporters need experimental validation.
| S-EPMC10973024 | biostudies-literature
Project description:Large amount of phthalate esters (PAEs) used as plasticizers in polyvinyl chloride (PVC) products has caused ubiquitous contamination to the environment and potential ecology security risk all around the world, especially in places plastic films were indispensably utilized due to the widely proposing of facility agriculture in China. A case of PAEs contamination in four suburb areas of Nanjing was analyzed and discussed in this study. A new frame work has been put forward based on multi-criteria evaluation model and mathematical method of catastrophe theory, using farming work, laboratory determination and relevant environmental standards to measure the ecology security risk of PAEs in study areas. The factors were selected based on the availability of the data and the local conditions. The assessment model involves the contamination status of PAEs in soil and vegetables, the contamination effects of PAEs to human and soil organisms and the contamination source of PAEs from plastic films and other products in the four study facility agriculture areas. An evaluation system of the model was composed of thirteen mesosphere indicators and twenty-five underlying indicators including total PAEs concentration in soils, single PAE concentration in soils, total PAEs concentrations in roots, leafy, solanaceous and stem vegetables, PAE human risks, soil microbial counts, microorganism diversity indices, atmospheric deposition of PAEs, whether sewage wastewater irrigation, planting mode of the facility agriculture areas and climate condition of study areas. The modified evaluation system was used in the assessment of ecology security of the same place based on the data of 2012, and the results suggested that the ecology security indicators were reliable and were agree well with the practical situation of the study areas. The results could provide guidance for the application of health risk assessment of soil environment for the strong objectivity of catastrophe theory compared with other evaluation methods.
| S-EPMC6209207 | biostudies-literature
Project description:Spent mushroom composts (SMCs) are waste products of mushroom cultivation. The handling of large amounts of SMCs has become an important environmental issue. Phthalates are plasticizers which are widely distributed in the environment and urban wastewater, and cannot be effectively removed by conventional wastewater treatment methods. In this study, SMCs are tested for their ability to remove phthalates, including benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP), and diethyl phthalate (DEP). Batch experiments reveal that BBP, DBP, and DEP can be degraded by the SMC enzyme extracts of four edible mushrooms: Pleurotus eryngii, Pleurotus djamor, Pleurotus ostreatus, and Auricularia polytricha. Potential fungus enzymes associated with BBP, DBP, and DEP degradation in SMCs (i.e., esterases, oxygenases, and oxidases/dehydrogenases) are uncovered by metaproteomic analysis using mass spectrometry. Bioreactor experiments indicate that the direct application of SMCs can remove BBP, DBP, and DEP from wastewater, through adsorption and biodegradation. The results of this study extend the application of white-rot fungi without laccases (e.g., Auricularia sp.) for the removal of organic pollutants which are not degraded by laccases. The application of SMCs for phthalate removal can be developed into a mycoremediation-based green and sustainable technology.
| S-EPMC8466598 | biostudies-literature
Project description:Despites lots of characterized microorganisms that are capable of degrading phthalic acid esters (PAEs), there are few isolated strains with high activity towards PAEs under a broad range of environmental conditions. In this study, Gordonia sp. YC-JH1 had advantages over its counterparts in terms of di(2-ethylhexyl) phthalate (DEHP) degradation performance. It possessed an excellent degradation ability in the range of 20⁻50 °C, pH 5.0⁻12.0, or 0⁻8% NaCl with the optimal degradation condition 40 °C and pH 10.0. Therefore, strain YC-JH1 appeared suitable for bioremediation application at various conditions. Metabolites analysis revealed that DEHP was sequentially hydrolyzed by strain YC-JH1 to mono(2-ethylhexyl) phthalate (MEHP) and phthalic acid (PA). The hydrolase MphG1 from strain YC-JH1 hydrolyzed monoethyl phthalate (MEP), mono-n-butyl phthalate (MBP), mono-n-hexyl phthalate (MHP), and MEHP to PA. According to molecular docking and molecular dynamics simulation between MphG1 and monoalkyl phthalates (MAPs), some key residues were detected, including the catalytic triad (S125-H291-D259) and the residues R126 and F54 potentially binding substrates. The mutation of these residues accounted for the reduced activity. Together, the mechanism of MphG1 catalyzing MAPs was elucidated, and would shed insights into catalytic mechanism of more hydrolases.
| S-EPMC6164851 | biostudies-literature
Project description:Cadmium is a global heavy metal pollutant. Marine green algae were used as efficient, low cost and eco-friendly biosorbent for cadmium ions removal from aqueous solutions. Plackett-Burman design was applied to determine the most significant factors for maximum cadmium removal from aqueous solutions using dry Ulva fasciata biomass. The most significant factors affecting cadmium removal process were further optimized by the face centered central composite design. The results indicated that 4 g of dry Ulva fasciata biomass was found to successfully remove 99.96% of cadmium from aqueous solution under the conditions of 200 mg/L of initial cadmium concentration at pH 5, 25 °C for 60 min of contact time with static condition. Dry Ulva fasciata biomass samples before and after cadmium biosorption were analyzed using SEM, EDS and FTIR. Furthermore, the immobilized biomass in sodium alginate-beads removed 99.98% of cadmium from aqueous solution at an initial concentration of 200 mg/L after 4 h which is significantly higher than that for control using sodium alginate beads without incorporation of the algal biomass (98.19%). Dry biomass of Ulva fasciata was proven to be cost-effective and efficient to eliminate heavy metals especially cadmium from aquatic effluents and the process is feasible, reliable and eco-friendly.
| S-EPMC6102212 | biostudies-literature
Project description:Microplastics (MPs) have been attracting wide attention. Biochar (BC) application could improve the soil quality in the contaminated soil. Currently, most studies focused on the effect of MPs or BC on the soil properties and microbial community, while they neglected the combined effects. This study investigated the combined effects of BC or ball-milled BC (BM) and polyethylene plastic fragments (PEPFs) and degradable plastic fragments (DPFs) on the removal of polycyclic aromatic hydrocarbons (PAHs) and phthalate esters (PAEs) from the PAH-contaminated soil and the potential microbial ecological mechanisms. The results showed that BC or BM combined with PEPF could accelerate the removal of PAHs and PAEs. PEPF combined with BM had the most significant effect on the removal of PAHs. Our results indicating two potential possible reasons contribute to increasing the removal of organic pollutants: (1) the high sorption rate on the PEPF and BC and (2) the increased PAH-degrader or PAE-degrader abundance for the removal of organic pollutants.
| S-EPMC8120302 | biostudies-literature
Project description:The enhanced and direct immobilization of the enzyme horseradish peroxidase on poly(methyl methacrylate) (PMMA) microchannel surfaces to create a miniaturized enzymatic reactor for the biocatalytic oxidation of phenols is demonstrated. Enzyme immobilization occurs by physical adsorption after oxygen plasma treatment, which micro-nanotextures the PMMA surfaces. A five-fold enhancement in immobilized enzyme activity was observed, attributed to the increased surface area and, therefore, to a higher quantity of immobilized enzymes compared to an untreated PMMA surface. The enzymatic reaction yield reached 75% using a flow rate of 2.0 μL/min for the reaction mixture. Additionally, the developed microreactor was reused more than 16 times without affecting the enzymatic conversion yield. These results demonstrate the potential of microchannels with plasma micro/nanotextured surfaces for the rapid and facile fabrication of microfluidic enzymatic microreactors with enhanced catalytic activity and stability.
| S-EPMC11477641 | biostudies-literature
Project description:The combined benefits of moisture-stable phosphonic acids and mesoporous silica materials (SBA-15 and MCM-41) as large-surface-area solid supports offer new opportunities for several applications, such as catalysis or drug delivery. We present a comprehensive study of a straightforward synthesis method via direct immobilization of several phosphonic acids and phosphoric acid esters on various mesoporous silicas in a Dean⁻Stark apparatus with toluene as the solvent. Due to the utilization of azeotropic distillation, there was no need to dry phosphonic acids, phosphoric acid esters, solvents, or silicas prior to synthesis. In addition to modeling phosphonic acids, immobilization of the important biomolecule adenosine monophosphate (AMP) on the porous supports was also investigated. Due to the high surface area of the mesoporous silicas, a possible catalytic application based on immobilization of an organocatalyst for an asymmetric aldol reaction is discussed.
| S-EPMC6409583 | biostudies-literature
Project description:Some areas of tropical soils where cocoa grows contain high cadmium (Cd) concentrations. The cocoa plant's need for nutrition causes the reticular system to uptake the toxic metal, translocate it, and accumulate it in roots, stems, and other edible parts such as cocoa beans and shells, threatening the health of cocoa consumers. To cope with this difficulty, different treatments have been applied to cadmium-contaminated soils, but they showed limited success. In this study, we prepared multicomponent nanoparticles (MCNPs) to treat cocoa soils in fixed-bed columns and field tests. Also, MCNPs were mixed with two varieties of cocoa beans, CNN51 and Fino de Aromain, during the fermentation, aiming to capture the cadmium. Our field investigations began by collecting soil samples from three Ecuadorian cocoa-producing farms to determine their physicochemical properties, cadmium, and iron contents. A few weeks later, a home-built prototype was installed in a cocoa plantation to fabricate the nanomaterials using commercial-grade chemicals and rainwater. Scanning Electron Microscope (SEM) images showed MCNPs with an average size of 65.21 nm and the formation of chain-like aggregates. In contrast, MCNPs size was 76.6 nm, measured with Dispersed Light Scattering (DLS). The chemical composition of MCNPs was 90.7 % Fe0 and 1.81 % sulfur (S), analyzed by energy dispersal X-ray (EDX) and confirmed by X-ray diffraction (XRD) spectrometer measurements. Regarding the treatments, for the fixed-bed column tests, 0.28-1.08 L/kg was dosed into the soil, while for field treatments, 250, 500, and 835 mL/min MCNPs were injected in soil areas of 5 m2 surrounding each cocoa tree (0.5-4.5 mg MCNPs/kg soil) at depths between 0 and 5 cm. Test results revealed that the procedure applied in the field did not reproduce the metal's immobilization (∼22 %) as in the fixed-bed columns (∼80 %). Moreover, cadmium removal was ∼20 % and ∼75 % after treating CCN51 and Fino de Aroma cocoa beans with 0.112 kg MCNPs/kg in the fermentation on-site and 0.034 kg MCNPs/kg in the laboratory. In this study, the size and chain-like aggregates of MCNPs notably influenced the field treatments as they precluded the filtration of MCNPs downwards. However, immobilizing cadmium could be more effective in soils with higher concentrations of the metal and multicomponent nanoparticles of smaller size, expanding our research scope and offering a practical solution to pollution issues in cocoa-growing regions.
| S-EPMC11889560 | biostudies-literature
Project description:In this study, a new core-shell magnetic mesoporous surface molecularly imprinted polymer (Fe3O4@SiO2@mSiO2-MIPs) which has specific adsorption and rapid adsorption rate for phthalate esters (PAEs) was prepared by a convenient method. Based on this composite as a magnetic solid phase extraction (MSPE) material, a rapid, efficient and sensitive matrix dispersion magnetic solid-phase extraction gas chromatography-mass spectrometry method (DMSPE-GC/MS) was developed for the determination of PAEs in multiple liquid samples. It is the first time that Fe3O4@SiO2@mSiO2-MIPs have been prepared by bonding amino groups on the surface of a double layer silicon substrate with diisononyl phthalate (DINP) as virtual template and 3-(2-aminoethyl)-aminopropyl trimethoxymethylsilane (TSD) as functional monomer. FT-IR, TEM, EDS, SEM, XRD, BET and VSM were used to characterize the composite. The adsorption isotherm and kinetics of Fe3O4@SiO2@mSiO2-MIPs showed that it possessed fast adsorption rates (approximately 5 min to reach equilibrium), high adsorption capacities (523.9 mg g-1) and good recognition of PAEs. The real samples were preconcentrated by Fe3O4@SiO2@mSiO2-MIPs, under the optimum DMSPE-GC/MS conditions. Validation experiments showed that the method presented good linearity (R 2 > 0.9971), satisfactory precision (RSD < 5.7%) and high recovery (92.1-105.8%), and the limits of detection ranged from 1.17 ng L-1 to 3.03 ng L-1. The results indicated that the novel method had good sensitivity, high efficiency and wide sample application and was suitable for the determination of PAEs in liquid drink samples such as water, alcohol, beverages and so on.
| S-EPMC8982323 | biostudies-literature