Waste-to-energy potential of hydrothermal liquefaction process water from different sources
Ontology highlight
ABSTRACT:
PROVIDER: PRJEB64520 | ENA |
REPOSITORIES: ENA
Dataset's files
| Action | DRS | |||
|---|---|---|---|---|
| Other | ||||
| ERR11753315.fastq.gz | Fastqsanger.gz | |||
| ERR11753316.fastq.gz | Fastqsanger.gz | |||
| ERR11753317.fastq.gz | Fastqsanger.gz | |||
| ERR11753318.fastq.gz | Fastqsanger.gz |
Items per page: 5 1 - 5 of 80 |
Similar Datasets
Project description:In this study, the potential of finger millet waste biomass (FMWB) as a source of biochar production through hydrothermal liquefaction (HTL) was investigated. The HTL process was designed using Box-Behnken design (BBD) and carried out with process variables, i.e., temperature (250 °C, 350 °C, and 450 °C), time (30 min, 45 min, and 60 min), and solid-to-water ratio (1 : 6, 1 : 8, and 1 : 10). The responses, i.e., biochar yield (%), bulk density (g cm-3), pH, and high heating value (HHV), were analysed. Optimisation was done using design expert software (version 13.0.1). The optimized finger millet waste biochar (O-FMWBC) was produced at optimum values (450 °C, 1 : 10, and 33.5 min). The results of proximate and elemental analysis revealed that moisture, ash, and volatile content, H, and O of O-FMWBC decreased while fixed carbon, thermal stability, and C content increased compared to FMWB. FT-IR, SEM-EDX, and XRD analyses were performed for O-FMWBC. The results of FT-IR showed the presence of O-H, C-H, C[double bond, length as m-dash]O, and C[double bond, length as m-dash]C functional groups. The SEM image revealed the rough surface of O-FMWBC, and XRD confirmed the production of a broad range of inorganic compounds and minerals. This study provides the full exploitation of FMWBC as a source of solid fuel.
| S-EPMC11299237 | biostudies-literature
Project description:Unused animal waste rendered fat is a potential feedstock for marine biofuels. In this work, bio-oil was generated using hydrothermal liquefaction (HTL) of nitrogen-free and low sulfur rendered bovine fat. Maximum bio-oil yield of 28 ± 1.5% and high heating value of 38.5 ± 0.16 MJ·kg‒1 was obtained at 330 °C at 50% animal fat solid load and 20 min retention time. The nitrogen and sulfur content were negligible, making the produced bio-oil useful marine biofuel, taking into account current stringent regulations on NOx and SOx emissions. The economic analysis of the process, where part of the bovine fat waste is converted to the bio-oil and the semi-solid residues can be used to supply the heat demand of the HTL process and alternately generate electricity, showed that our process is likely to generate a positive profit margin on a large scale. We also showed the growing economic importance of electricity in the revenues as commercial production becomes more energy efficient.
| S-EPMC10734409 | biostudies-literature
Project description:Transcriptomics analysis of biopolymer (medium chain length polyhydroxyalkanoate) producing strain P.putida LS46 cultured with biodiesel derived waste carbon sources: studies of cellular adaptation to the industrial waste streams and metabolic profiling under the polymer producing conditions. We are reporting RNAseq analysis data here as part of our multi-level Omics study of medium chain length polyhydroxyalkanoate (mcl-PHA) producing strain P.putida LS46 culture with biodiesel derived waste glycerol and waste fatty acids. The data presented here will be used in two separate manuscripts. The objectives of this study are a): to evaluate cellular responses of P.putida LS46 under industrial waste stream. b): to study gene expression profile under two selected mcl-PHA producing conditions of P.putida LS46. Comparative multi-level Omics study: for objective a): Exponential P.putida LS46 cell from waste glycerol culture compared against reagent grade pure glycerol culture. For objective b): Two mcl-PHA producing conditions, namely stationary phase waste glycerol culture and exponential phase waste fatty acid culture of P.putida LS46, were compared against exponential phase waste glycerol culture of P.putida LS46. Major results from objective a): The waste glycerol substrate induced expression of a large number of genes putatively involved in heavy metal tolerance, including three gene clusters: a putative cusABC transcript unit and two copies of copAB, which are usually involved in copper resistance and tolerance to other monovalent heavy metals. A local gene relocation was observed in cluster 1 consisting cusABC and copAB relative to the KT2440 type strain according to the phylogenetic and gene neighbourhood analyses on various P. putida strains. P. putida LS46 also contains 11 putative MerR family regulators, which sense various environmental stimuli including heavy metals. MerR-1 is an ortholog of the copper response regulator of other gram-negative bacteria, and was highly up-regulated in waste glycerol cultures. Finally, a number of genes involved in cell responses to high extra-cellular Na+ concentrations, and genes of the fatty acid beta-oxidation pathway were up-regulated in waste glycerol cultures Major results from objective b): Regardless to the type of substrates, up-regulation of two mcl-PHA synthase (PhaC1 and PhaC2), and two phasin proteins (PhaF and PhaI) are the most common genotype under mcl-PHA production conditions. PhaG and possible PhaJ4 connect fatty acid de novo synthesis to mcl-PHA in waste glycerol culture. Interestingly, expression of gene, fabZ, in production of unsaturated fatty acid from fatty acid de novo synthesis was only observed in waste glycerol culture. On the other hand, PhaJ1 and PhaJ4 derived mcl-PHA production via fatty acid beta-oxidation was observed under waste fatty acid culture. These results would help to explain observed different production kinetics and monomer distribution of the polymer. Although under active mcl-PHA production condition, depression on the expression of glpF genes in glycerol transportation system prevent further channelling extra-cellular glycerol into the cell. Waste glycerol culture also triggers trahalose synthesis pathway, a potential competing pathway during mcl-PHA synthesizing. In waste fatty acid culture, the intermediates (acyl-CoA and 3-hydroxyacyl-CoA) of fatty acid beta-oxidation were used for mcl-PHA production and were also likely hydrolysed to their free acid forms via an up-regulated thioesteras coding gene, tesA. Acetyl-CoA cleaved from the pathway was clearly channeled into glyoxylate shut for C2 carbon assimilation over spillage as CO2 through TCA cycle or used in fatty acid biosynthesis pathway. In total 4 sampling points, namely exponential phase of pure glycerol, waste glycerol and waste free fatty acids cultures, and stationary phase of waste glycerol culture. For each sampling point, 2 biological replicates were taken. (Thus 8 samples in total)
2015-05-01 | E-GEOD-65029 | biostudies-arrayexpress
Project description:Transcriptomics analysis of biopolymer (medium chain length polyhydroxyalkanoate) producing strain P.putida LS46 cultured with biodiesel derived waste carbon sources: studies of cellular adaptation to the industrial waste streams and metabolic profiling under the polymer producing conditions. We are reporting RNAseq analysis data here as part of our multi-level Omics study of medium chain length polyhydroxyalkanoate (mcl-PHA) producing strain P.putida LS46 culture with biodiesel derived waste glycerol and waste fatty acids. The data presented here will be used in two separate manuscripts. The objectives of this study are a): to evaluate cellular responses of P.putida LS46 under industrial waste stream. b): to study gene expression profile under two selected mcl-PHA producing conditions of P.putida LS46. Comparative multi-level Omics study: for objective a): Exponential P.putida LS46 cell from waste glycerol culture compared against reagent grade pure glycerol culture. For objective b): Two mcl-PHA producing conditions, namely stationary phase waste glycerol culture and exponential phase waste fatty acid culture of P.putida LS46, were compared against exponential phase waste glycerol culture of P.putida LS46. Major results from objective a): The waste glycerol substrate induced expression of a large number of genes putatively involved in heavy metal tolerance, including three gene clusters: a putative cusABC transcript unit and two copies of copAB, which are usually involved in copper resistance and tolerance to other monovalent heavy metals. A local gene relocation was observed in cluster 1 consisting cusABC and copAB relative to the KT2440 type strain according to the phylogenetic and gene neighbourhood analyses on various P. putida strains. P. putida LS46 also contains 11 putative MerR family regulators, which sense various environmental stimuli including heavy metals. MerR-1 is an ortholog of the copper response regulator of other gram-negative bacteria, and was highly up-regulated in waste glycerol cultures. Finally, a number of genes involved in cell responses to high extra-cellular Na+ concentrations, and genes of the fatty acid beta-oxidation pathway were up-regulated in waste glycerol cultures Major results from objective b): Regardless to the type of substrates, up-regulation of two mcl-PHA synthase (PhaC1 and PhaC2), and two phasin proteins (PhaF and PhaI) are the most common genotype under mcl-PHA production conditions. PhaG and possible PhaJ4 connect fatty acid de novo synthesis to mcl-PHA in waste glycerol culture. Interestingly, expression of gene, fabZ, in production of unsaturated fatty acid from fatty acid de novo synthesis was only observed in waste glycerol culture. On the other hand, PhaJ1 and PhaJ4 derived mcl-PHA production via fatty acid beta-oxidation was observed under waste fatty acid culture. These results would help to explain observed different production kinetics and monomer distribution of the polymer. Although under active mcl-PHA production condition, depression on the expression of glpF genes in glycerol transportation system prevent further channelling extra-cellular glycerol into the cell. Waste glycerol culture also triggers trahalose synthesis pathway, a potential competing pathway during mcl-PHA synthesizing. In waste fatty acid culture, the intermediates (acyl-CoA and 3-hydroxyacyl-CoA) of fatty acid beta-oxidation were used for mcl-PHA production and were also likely hydrolysed to their free acid forms via an up-regulated thioesteras coding gene, tesA. Acetyl-CoA cleaved from the pathway was clearly channeled into glyoxylate shut for C2 carbon assimilation over spillage as CO2 through TCA cycle or used in fatty acid biosynthesis pathway.
2015-05-01 | GSE65029 | GEO
Project description:CO2 utilization
| S-EPMC9769105 | biostudies-literature
Project description:Food waste is an abundant and inexpensive resource for the production of renewable fuels. Biocrude yields obtained from hydrothermal liquefaction (HTL) of food waste can be boosted using hydroxyapatite (HAP) as an inexpensive and abundant catalyst. Combining HAP with an inexpensive homogeneous base increased biocrude yield from 14 ± 1 to 37 ± 3%, resulting in the recovery of 49 ± 2% of the energy contained in the food waste feed. Detailed product analysis revealed the importance of fatty-acid oligomerization during biocrude formation, highlighting the role of acid-base catalysts in promoting condensation reactions. Economic and environmental analysis found that the new technology has the potential to reduce US greenhouse gas emissions by 2.6% while producing renewable diesel with a minimum fuel selling price of $1.06/GGE. HAP can play a role in transforming food waste from a liability to a renewable fuel.
| S-EPMC9486744 | biostudies-literature
Project description:Food waste is a major source of environmental pollution, as its landfills attribute to greenhouse gas emissions. This study developed a robust upcycling bioprocess that converts food waste into lactic acid through autochthonous fermentation and further produces biodegradable polymer polyhydroxybutyrate (PHB). Food can be stored without affecting its bioconversion to lactic acid, making it feasible for industrial application. Mapping autochthonous microbiota in the food waste fermentation before and after storage revealed lactic-acid-producing microorganisms dominate during the indigenous fermentation. Furthermore, through global transcriptomic and gene set enrichment analyses, it was discovered that coupling lactic acid as carbon source with ammonium sulfate as nitrogen source in Cupriavidus necator culture upregulates pathways, including PHB biosynthesis, CO2 fixation, carbon metabolism, pyruvate metabolism, and energy metabolism compared to pairing with ammonium nitrate. There was ∼90 % PHB content in the biomass. Overall, the study provides crucial insights into establishing a bioprocess for food waste repurposing.
2025-06-16 | GSE296860 | GEO
Project description:The characterization of products produced from hydrothermal liquefaction of algal biomass is helpful to better understand the effect of different kinds of raw materials on the properties of the product fractions. The data presented in this article are related to the research article entitled "Integration of hydrothermal liquefaction and supercritical water gasification for the improvement of energy recovery from algal biomass" (Duan et al., 2018) [1]. In this data article, the compositions of gaseous products produced from hydrothermal liquefaction of eight different algae feedstocks at 350 °C for 60 min were analyzed by gas chromatography. The molecular and elemental compositions of the crude bio-oils produced from hydrothermal liquefaction of eight different algae feedstocks at 350 °C for 60 min were analyzed by comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry and organic elemental analyzer. The color of aqueous phases before and after they were subjected to supercritical water gasification was recorded by a high-resolution camera.
| S-EPMC6140826 | biostudies-literature
Project description:Hypertrophic scar (HS) is a somatopsychic disease that significantly affects quality of life. 5-aminolevulinic acid (5-ALA)-mediated photodynamic therapy (PDT) holds promise for HS treatment, while challenges like poor transdermal delivery and rapid metabolism into non_xfffe_photosensitive heme restrict its effectiveness. Inspired by the natural phenomenon of a whale fall nourishing life, this study innovatively repurposes 5-ALA metabolic waste, heme, as a “whale-like” energy source to drive ferroptosis, thus establishing a zero-waste therapy. This is achieved by encapsulating 5-ALA and baicalin within human H-ferritin (HFn), subsequently incorporated into polyvinylpyrrolidone (PVP) microneedles (FAB@MN). The FAB@MN exhibits excellent targeting towards hypertrophic scar fibroblasts (HSFs) with pH-responsive programmed drug release. Upon application, 5-ALA is converted into PpIX to initiate PDT. Subsequently, baicalin is released, triggering ferroptosis while also synergizing with the ROS and heme accumulated during PDT to overstimulate the HO-1-heme metabolic axis. This activation releases Fe2+ and CO, further potentiating ferroptosis. Moreover, the enhanced ferroptotic response driven by FAB@MN induces mitophagy, leading to increased Fe²⁺ release from the mitochondria. Unlike conventional PDT only focuses on immediate effects, this approach uses 5-ALA photodynamic waste to fuel a sustained ferroptosis response post-PDT, offering new avenues for HS treatments.
2025-06-24 | GSE300586 | GEO
Project description:To understand transcriptional regulation of Eubacterium limosum KIST612 across different carbon/energy/electron sources, RNAseq analysis was carried out over different substrate conditions (glucose, CO, H2/CO2).
2020-04-25 | GSE149269 | GEO