Metabolomics,Unknown,Transcriptomics,Genomics,Proteomics

Dataset Information

Transcription profiling of mouse mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney to identify Six1 and Six4 target genes

ABSTRACT: To identify Six1 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six1wt or VP16-Six1W171R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 Âµg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six1wt infected sample) or Cy5 (AxCAwt VP16-Six1W171R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65Â°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. To identify Six4 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six4wt or VP16-Six4W263R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 Âµg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six4wt infected sample) or Cy5 (AxCAwt VP16-Six4W263R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65Â°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios.

ORGANISM(S): Mus musculus

SUBMITTER: Shigeru Sato

PROVIDER: E-GEOD-2043 | biostudies-arrayexpress |

REPOSITORIES: biostudies-arrayexpress

ACCESS DATA

Publications

Slc12a2 is a direct target of two closely related homeobox proteins, Six1 and Six4.

Ando Zen-Ichi Z Sato Shigeru S Ikeda Keiko K Kawakami Kiyoshi K

The FEBS journal 20050601 12

Six genes are homologs of Drosophila sine oculis and encode transcription factors that are characterized by a conserved Six domain and homeodomain. Of the six family members (Six1-Six6) in mice, Six1 and Six4 show similar expression patterns during embryogenesis. Six1-/- mice show defective formation of various organs such as inner ear, nose, skeletal muscle, kidney and thymus, whereas Six4-/- mice show little anomaly in organogenesis. To understand the molecular basis for the differential funct ...[more]

PMID: 15955062

Similar Datasets

Project description:To identify Six1 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six1wt or VP16-Six1W171R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six1wt infected sample) or Cy5 (AxCAwt VP16-Six1W171R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. To identify Six4 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six4wt or VP16-Six4W263R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six4wt infected sample) or Cy5 (AxCAwt VP16-Six4W263R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. Keywords: other

Project description:Samples and RNA preparation: The series is composed of 4 hybridizations for analysis of differentially expressed genes in the liver of ciprofibrate dosed vs. control rats. Rats (200-250 g) were given (by gastric intubation) tap water (control group, n=5) or ciprofibrate (50 mg/kg body weight, once daily for 60 days, n=4). Liver total RNA extraction was performed first by ultracentrifugation on a cesium chloride cushion and then using TRIZOL Reagent (GIBCO BRL Life Technologies, New York, NY). Labeling and hybridization: One microgram of total RNA from the control pool (n=5), and from each ciprofibrate dosed rat was reverse transcribed and labeled with Cy3- and Cy5-attached dendrimer, respectively, using 3DNA Array Detection Submicro kit as described in the manufacturer's protocols (Genisphere, Montvale, NJ). The labeling reactions were also spiked with exogenous control RNAs (Stratagene) at expected Cy5/Cy3 ratios of 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 0.5, 0.33, 0.25 and 0.125 for control spike 1, 2, 3, 4, 5, 6, 8, 9, 10 and 7, respectively. The Cy3 and Cy5 labeled samples (combined volume 5 microliter) were mixed with 30 microliter of the hybridization solution containing 0.25 M NaPO4, 1 mM EDTA, 4.5% SDS, 1 x SSC, 2 x Denhardt's solution, 0.25 microliter antifade reagent (Genisphere) and 0.2 microgram mouse COT-1 DNA (GIBCO BRL Life Technologies), added onto the array and covered with 22 x 50mm cover slip. The array was assembled into humidified hybridization chamber (Corning) and hybridized at 65oC for 18 h by submerging in a water bath. Post-hybridization washes were done once in 2 x SSC, 0.2% SDS at 55oC for 15 min, then in 2 x SSC at room temperature for 15 min, and finally with 0.2 x SSC at room temperature for 15 min. Scanning, image analysis and data processing: Arrays were scanned at 10 micrometer resolution with a confocal laser scanner constructed in-house in collaboration with NEMKO (Trondheim, Norway) according to a prototype developed at NHGRI (http://www.nhgri.gov/DIR/LCG/15K(HTML/). Microarray image analysis was done with MicroArray Suite software version 2.1 with globally normalization (Scanalytics, Inc., Fairfax VA). First, spots undetected (target intensity=1) in at least one array were excluded. Then, spots with signal intensity (averages of the 4 arrays) less than 300 in both channels were removed. The fluorescence intensity ratios (Cy5/Cy3) for genes measured from probes spotted in duplicate were averaged for each slide. Then, mean ratios of the 4 hybridizations were calculated for each gene, and differentially regulated genes were determined using 1.4 fold change cutoff values (1.4 for up-regulated or 0.7 for down-regulated genes). Keywords: other

Dataset Information

Transcription profiling of mouse mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney to identify Six1 and Six4 target genes

Publications

Slc12a2 is a direct target of two closely related homeobox proteins, Six1 and Six4.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure