Quantum Dot-Doped Electrospun Polymer Fibers for Explosive Vapor Sensors
Ontology highlight
ABSTRACT:
SUBMITTER: Ennis D
PROVIDER: S-EPMC10262150 | biostudies-literature | 2023 May
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Controllable synthesis of homochiral nano/micromaterials has been a constant challenge for fabricating various stimuli-responsive chiral sensors. To provide an avenue to this goal, we report electrospinning as a simple and economical strategy to form continuous homochiral microfibers with strain-sensitive chiroptical properties. First, electrospun homochiral microfibers from self-assembled cadmium sulfide (CdS) quantum dot magic-sized clusters (MSCs) are produced. Highly sensitive and reversible strain sensors are then fabricated by embedding these chiroptically active fibers into elastomeric films. The chiroptical response on stretching is indicated quantitatively as reversible changes in magnitude, spectral position (wavelength), and sign in circular dichroism (CD) and linear dichroism (LD) signals and qualitatively as a prominent change in the birefringence features under cross-polarizers. The observed periodic twisted helical fibrils at the surface of fibers provide insights into the origin of the fibers' chirality. The measurable shifts in CD and LD are caused by elastic deformations of these helical fibrillar structures of the fiber. To elucidate the origin of these chiroptical properties, we used field emission-electron microscopy (FE-SEM), atomic force microscopy (AFM), synchrotron X-ray analysis, polarized optical microscopy, as well as measurements to isolate the true CD, and contributions from photoelastic modulators (PEM) and LD. Our findings thus offer a promising strategy to fabricate chiroptical strain-sensing devices with multiple measurables/observables using electric-field-assisted spinning of homochiral nano/microfibers.
| S-EPMC11009915 | biostudies-literature
Project description:Electrospinning has emerged as a powerful strategy to develop controlled release drug delivery systems but the effects of post-fabrication solvent vapor annealing on drug-loaded electrospun fibers have not been explored to date. In this work, electrospun poly(ԑ-caprolactone) (PCL) fibers loaded with the hydrophobic small-molecule spironolactone (SPL) were explored. Immediately after fabrication, the fibers are smooth and cylindrical. However, during storage the PCL crystallinity in the fibers is observed to increase, demonstrating a lack of stability. When freshly-prepared fibers are annealed with acetone vapor, the amorphous PCL chains recrystallize, resulting in the fiber surfaces becoming wrinkled and yielding shish-kebab like structures. This effect does not arise after the fibers have been aged. SPL is found to be amorphously dispersed in the PCL matrix both immediately after electrospinning and after annealing. In vitro dissolution studies revealed that while the fresh fibers show a rapid burst of SPL release, after annealing more extended release profiles are observed. Both the rate and extent of release can be varied through changing the annealing time. Further, the annealed formulations are shown to be stable upon storage.
| S-EPMC7076406 | biostudies-literature
Project description:Tailored luminescent guest@metal-organic framework (Guest@MOF) materials with outstanding photophysical properties are enabling materials for emergent technologies in smart sensors and optoelectronics. However, the practical utility of Guest@MOF currently is impaired by its poor stability and difficult-to-handle powder form. Here, we combine a luminescent-sensing Guest@MOF system with a non-luminescent polymer matrix and, for the first time, demonstrated the easy-to-apply electrospinning of luminescent fibers comprising nanocrystals of RhB@ZIF-71 (rhodamine B@zeolitic imidazolate framework-71) homogeneously dispersed in a polyvinylidene difluoride (PVDF) matrix. The luminescence of RhB@ZIF-71/PVDF fiber is tunable and exhibits a quantum yield exceeding 90%. Compared with RhB fluorophore in PVDF fiber, the ZIF-71 (host) protects the nanoconfined RhB guest molecules (especially the J-aggregates of RhB), giving the composite fiber its unique thermofluorochromic response and enhanced thermal stability to 200°C. Our results reveal the exciting opportunities for implementing electrospun luminescent fibers functionalized with bespoke Guest@MOF nanocrystals for multifunctional device applications.
| S-EPMC8430381 | biostudies-literature
Project description:Nano- and micro- fibers of conjugated polymer semiconductors are particularly interesting both for applications and for fundamental research. They allow an investigation into how electronic properties are influenced by size confinement and chain orientation within microstructures that are not readily accessible within thin films. Moreover, they open the way to many applications in organic electronics, optoelectronics and sensing. Electro-spinning, the technique subject of this review, is a simple method to effectively form and control conjugated polymer fibers. We provide the basics of the technique and its recent advancements for the formation of highly conducting and high mobility polymer fibers towards their adoption in electronic applications.
| S-EPMC5453086 | biostudies-other
Project description:Electrospun polyurethane fibers doped with nitric oxide (NO)-releasing silica particles are presented as novel macromolecular scaffolds with prolonged NO-release and high porosity. Fiber diameter (119-614 nm) and mechanical strength (1.7-34.5 MPa of modulus) were varied by altering polyurethane type and concentration, as well as the NO-releasing particle composition, size, and concentration. The resulting NO-releasing electrospun nanofibers exhibited ~83% porosity with flexible plastic or elastomeric behavior. The use of N-diazeniumdiolate- or S-nitrosothiol-modified particles yielded scaffolds exhibiting a wide range of NO release totals and durations (7.5 nmol mg(-1)-0.12 μmol mg(-1) and 7 h to 2 weeks, respectively). The application of NO-releasing porous materials as coatings for subcutaneous implants may improve tissue biocompatibility by mitigating the foreign body response and promoting cell integration.
| S-EPMC3811043 | biostudies-literature
Project description:Suspended chemiresistive graphene sensors have been fabricated using well-established nanofabrication techniques to generate sensors that are highly sensitive to pyridine and with excellent discrimination between polar and nonpolar analytes. When coated with a polymer surface layer and suspended on 3-D patterned glass electrodes, a hybrid combination of polymer and graphene yields chemiresistive vapor sensors. Expansion and contraction of the polymer layer produces strain on the suspended graphene (Gr). Hence, when organic vapors permeate into the polymer layer, the high gauge factor of the graphene induces substantial electrical resistive changes as folds and creases are induced in the graphene. The hybrid suspended polymer/Gr sensor exhibits substantial responses to polar organic vapors, especially pyridine, while also exhibiting reversibility and increased discrimination between polar and nonpolar analytes compared to previous approaches. This sensor design also allows for potential tunability in the types of polymers used for the reactive surface layer, allowing for use in a variety of potential applications.
| S-EPMC8973036 | biostudies-literature
Project description:In recent years, electrospun polymer fibers have gained attention for various antibacterial applications. In this work, the effect of positively charged polymer fiber mats as antibacterial gauze is studied using electrospun poly(caprolactone) and polyaniline nanofibers. Chloroxylenol, an established anti-microbial agent is used for the first time as a secondary dopant to polyaniline during the electrospinning process to make the surface of the polyaniline fiber positively charged. Both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli are used to investigate the antibacterial activity of the positively charged and uncharged polymer surfaces. The results surprisingly show that the polyaniline surface can inhibit the growth of both bacteria even when chloroxylenol is used below its minimum inhibitory concentration. This study provides new insights allowing the better understanding of dopant-based, intrinsically conducting polymer surfaces for use as antibacterial fiber mats.
| S-EPMC7438602 | biostudies-literature
Project description:We investigated CO oxidation behavior of doped cerium oxide fibers. Electrospinning technique was used to fabricate the inorganic fibers after burning off polymer component at 600 °C in air. Cu, Ni, Co, Mn, Fe, and La were doped at 10 and 30 mol% by dissolving metal salts into the polymeric electrospinning solution. 10 mol% Cu-doped ceria fiber showed excellent catalytic activity for low temperature CO oxidation with 50% CO conversion at just 52 °C. This 10 mol% Cu-doped sample showed unexpected regeneration behavior under simple ambient air annealing at 400 °C. From the CO oxidation behavior of the 12 samples, we conclude that absolute oxygen vacancy concentration estimated by Raman spectroscopy is not a good indicator for low temperature CO oxidation catalysts unless extra care is taken such that the Raman signal reflects oxide surface status. The experimental trend over the six dopants showed limited agreement with theoretically calculated oxygen vacancy formation energy in the literature.
| S-EPMC7324448 | biostudies-literature
Project description:The work describes the development of a flexible, hydrogel embedded pH-sensor that can be integrated in inexpensive wearable and non-invasive devices at epidermal level for electrochemical quantification of H+ ions in sweat. Such a device can be useful for swift, real time diagnosis and for monitoring specific conditions. The sensors' working electrodes are flexible poly(methyl methacrylate) electrospun fibers coated with a thin gold layer and electrochemically functionalized with nanostructured palladium/palladium oxide. The response to H+ ions is investigated by cyclic voltammetry and electrochemical impedance spectroscopy while open circuit potential measurements show a sensitivity of aprox. -59 mV per pH unit. The modification of the sensing interface upon basic and acid treatment is characterized by scanning and transmission electron microscopy and the chemical composition by X-ray photoelectron spectroscopy. In order to demonstrate the functionality of the pH-sensor at epidermal level, as a wearable device, the palladium/palladium oxide working electrode and silver/silver chloride reference electrode are embedded within a pad of polyacrylamide hydrogel and measurements in artificial sweat over a broad pH range were performed. Sensitivity up to -28 mV/pH unit, response time below 30 s, temperature dependence of approx. 1 mV/°C as well as the minimum volume to which the sensor responses of 250 nanoliters were obtained for this device. The proposed configuration represents a viable alternative making use of low-cost and fast fabrication processes and materials.
| S-EPMC6586619 | biostudies-literature
Project description:Fluorescence-based assays for hydrolases that cleave within the substrate (endopeptidases) are common, while developing substrates for proteases that selectively cleave from peptide termini (exopeptidases) is more challenging, since the termini are specifically recognized by the enzyme and cannot be modified to facilitate a Förster resonance energy transfer (FRET)-based approach. The development of a robust system that enables the quenching of fluorescent particles by simple amino acid side chains would find broad utility for peptide sensors and would be advantageous for exopeptidases. Here we describe a quantum dot (QD)-based electron transfer (ET) sensor that is able to allow direct, quantitative monitoring of both exopeptidase and endopeptidase activity. The incorporation of 3,4-dihydroxyphenylalanine (DOPA) into the sequence of a peptide allows for the quenching of QD photoluminescence through an ET mechanism. DOPA is a nonproteinogenic amino acid that can replace a phenylalanine or tyrosine residue in a peptide sequence without severely altering structural properties, allowing for its introduction at multiple positions within a biologically active peptide substrate. Consequently, the quenching system presented here is ideally suited for incorporation into diverse peptide substrates for enzyme recognition, digestion, and activity sensing. Our findings suggest a broad utility of a small ET-capable amino acid side chain in detecting enzyme activity through ET-mediated QD luminescence quenching.
| S-EPMC4968404 | biostudies-literature