Electrospun Polymer Fibers for Electronic Applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Luzio A
PROVIDER: S-EPMC5453086 | biostudies-other | 2014 Jan
REPOSITORIES: biostudies-other
Shared Molecules
Only show the datasets with similarity scores above: 0.5
Threshold
0.5
Similar Datasets
Project description:In recent years, electrospun polymer fibers have gained attention for various antibacterial applications. In this work, the effect of positively charged polymer fiber mats as antibacterial gauze is studied using electrospun poly(caprolactone) and polyaniline nanofibers. Chloroxylenol, an established anti-microbial agent is used for the first time as a secondary dopant to polyaniline during the electrospinning process to make the surface of the polyaniline fiber positively charged. Both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli are used to investigate the antibacterial activity of the positively charged and uncharged polymer surfaces. The results surprisingly show that the polyaniline surface can inhibit the growth of both bacteria even when chloroxylenol is used below its minimum inhibitory concentration. This study provides new insights allowing the better understanding of dopant-based, intrinsically conducting polymer surfaces for use as antibacterial fiber mats.
| S-EPMC7438602 | biostudies-literature
Project description:Under ambient conditions and in aqueous environments, transformations of nanoparticle-based ferroelectric components can raise important stability issues that are relevant for applications as multilayer capacitors, flexible piezoelectrics, or biomedical devices. We show that X-ray amorphous BaTiO3 nanoparticles that were grown by flame spray pyrolysis and which can be incorporated into electrospun polymer fibers undergo incongruent Ba2+ dissolution in the presence of water. At pH > 5 and in contact with air, corresponding Ba solutes spontaneously convert into crystalline BaCO3 needles to produce characteristic nano- and microstructures. We compared the reactivity of amorphous BaTiO3 nanoparticle powders with those of nanocrystals after annealing-induced crystallization. The stability of aqueous nanoparticle-polymer formulations, which are typically part of nanoparticle encapsulation in polymers and electrospinning, was included in this analysis. Nanoparticle size, crystallinity, surface area, the presence of carbonaceous surface contaminants, and the effect of surface passivation with polymers are addressed to underline the critical role of condensed water during the synthesis, storage, and processing of BaTiO3 nanoparticle-based composites.
| S-EPMC10644300 | biostudies-literature
Project description:This research seeks to support reconnaissance efforts against homemade explosives (HMEs) and improvised explosive devices (IEDs), which are leading causes of combat casualties in recent conflicts. The successful deployment of a passive sensor to be developed for first responders and military must take expense, training requirements, and physical burden all into consideration. By harnessing the size-dependent luminescence of quantum dots (QDs) being electrospun into polymer fibers, the authors of this work hope to progress toward the development of lightweight, multivariable, inexpensive, easy to use and interpret, field-applicable sensors capable of detecting explosive vapors. The data demonstrate that poly(methyl methacrylate) (PMMA), polystyrene (PS), and polyvinyl chloride (PVC) fibers doped with Fort Orange cadmium selenide (CdSe) QDs, Birch Yellow CdSe QDs, or carbon (C) QDs will quench in the presence of explosive vapors (DNT, TNT, TATP, and RDX). In all cases, the fluorescent signal of the doped fiber continuously quenched upon sustained exposure to the headspace vapors. The simple method for the integration of QDs into the fibers' structure combined with their straightforward visual response, reusability, and durability all present characteristics desired for a field-operable and multimodal sensor with the ability to detect explosive threats.
| S-EPMC10262150 | biostudies-literature
Project description:Electrospun fiber scaffolds have a huge potential for the successful treatment of infected wounds based on their unique properties. Although several studies report novel drug-loaded electrospun fiber-based biomaterials, many of these do not provide information on their interactions with eukaryotic and bacterial cells. The main aim of this study was to develop antibacterial drug-loaded porous biocompatible polycaprolactone (PCL) fiber scaffolds mimicking the native extracellular matrix for wound healing purposes. Mechanical property evaluation and different biorelevant tests were conducted in order to understand the structure-activity relationships and reveal how the surface porosity of fibers and the fiber diameter affect the scaffold interactions with the living bacterial and eukaryotic fibroblast cells. Cell migration and proliferation assays and antibiofilm assays enabled us to enlighten the biocompatibility and safety of fiber scaffolds and their suitability to be used as scaffolds for the treatment of infected wounds. Here, we report that porous PCL microfiber scaffolds obtained using electrospinning at high relative humidity served as the best surfaces for fibroblast attachment and growth compared to the nonporous microfiber or nonporous nanofiber PCL scaffolds. Porous chloramphenicol-loaded microfiber scaffolds were more elastic compared to nonporous scaffolds and had the highest antibiofilm activity. The results indicate that in addition to the fiber diameter and fiber scaffold porosity, the single-fiber surface porosity and its effect on drug release, mechanical properties, cell viability, and antibiofilm activity need to be understood when developing antibacterial biocompatible scaffolds for wound healing applications. We show that pores on single fibers within an electrospun scaffold, in addition to nano- and microscale diameter of the fibers, change the living cell-fiber interactions affecting the antibiofilm efficacy and biocompatibility of the scaffolds for the local treatment of wounds.
| S-EPMC7689890 | biostudies-literature
Project description:Wound dressings are high performance and high value products which can improve the regeneration of damaged skin. In these products, bioresorption and biocompatibility play a key role. The aim of this study is to provide progress in this area via nanofabrication and antimicrobial natural materials. Polyhydroxyalkanoates (PHAs) are a bio-based family of polymers that possess high biocompatibility and skin regenerative properties. In this study, a blend of poly(3-hydroxybutyrate) (P(3HB)) and poly(3-hydroxyoctanoate-co-3-hydroxy decanoate) (P(3HO-co-3HD)) was electrospun into P(3HB))/P(3HO-co-3HD) nanofibers to obtain materials with a high surface area and good handling performance. The nanofibers were then modified with silver nanoparticles (AgNPs) via the dip-coating method. The silver-containing nanofiber meshes showed good cytocompatibility and interesting immunomodulatory properties in vitro, together with the capability of stimulating the human beta defensin 2 and cytokeratin expression in human keratinocytes (HaCaT cells), which makes them promising materials for wound dressing applications.
| S-EPMC8434271 | biostudies-literature
Project description:Electrospinning has emerged as a powerful strategy to develop controlled release drug delivery systems but the effects of post-fabrication solvent vapor annealing on drug-loaded electrospun fibers have not been explored to date. In this work, electrospun poly(ԑ-caprolactone) (PCL) fibers loaded with the hydrophobic small-molecule spironolactone (SPL) were explored. Immediately after fabrication, the fibers are smooth and cylindrical. However, during storage the PCL crystallinity in the fibers is observed to increase, demonstrating a lack of stability. When freshly-prepared fibers are annealed with acetone vapor, the amorphous PCL chains recrystallize, resulting in the fiber surfaces becoming wrinkled and yielding shish-kebab like structures. This effect does not arise after the fibers have been aged. SPL is found to be amorphously dispersed in the PCL matrix both immediately after electrospinning and after annealing. In vitro dissolution studies revealed that while the fresh fibers show a rapid burst of SPL release, after annealing more extended release profiles are observed. Both the rate and extent of release can be varied through changing the annealing time. Further, the annealed formulations are shown to be stable upon storage.
| S-EPMC7076406 | biostudies-literature
Project description:Pharmaceutical nano-fibers have attracted widespread attention from researchers for reasons such as adaptability of the electro-spinning process and ease of production. As a flexible method for fabricating nano-fibers, electro-spinning is extensively used. An electro-spinning unit is composed of a pump or syringe, a high voltage current supplier, a metal plate collector and a spinneret. Optimization of the attained nano-fibers is undertaken through manipulation of the variables of the process and formulation, including concentration, viscosity, molecular mass, and physical phenomenon, as well as the environmental parameters including temperature and humidity. The nano-fibers achieved by electro-spinning can be utilized for drug loading. The mixing of two or more medicines can be performed via electro-spinning. Facilitation or inhibition of the burst release of a drug can be achieved by the use of the electro-spinning approach. This potential is anticipated to facilitate progression in applications of drug release modification and tissue engineering (TE). The present review aims to focus on electro-spinning, optimization parameters, pharmacological applications, biological characteristics, and in vivo analyses of the electro-spun nano-fibers. Furthermore, current developments and upcoming investigation directions are outlined for the advancement of electro-spun nano-fibers for TE. Moreover, the possible applications, complications and future developments of these nano-fibers are summarized in detail.
| S-EPMC7254207 | biostudies-literature
Project description:Electrospun nanosorbent fibers specifically designed for efficient lithium extraction were developed, exhibiting superior physicochemical properties. These fibers were fabricated using a polyacrylonitrile/dimethylformamide matrix, with viscosity and dynamic mechanical analysis showing that optimal interactions were achieved at lower contents of layered double hydroxide. This meticulous adjustment in formulation led to the creation of lithium porous nanosorbent fibers (Li-PNFs-1). Li-PNFs-1 exhibited outstanding mechanical attributes, including a yield stress of 0.09 MPa, a tensile strength of 2.48 MPa, and an elongation at a break of 19.7%. Additionally, they demonstrated pronounced hydrophilicity and hierarchical porous architecture, which greatly favor rapid wetting kinetics and lithium adsorption. Morphologically, they exhibited uniform smoothness with a diameter averaging 546 nm, indicative of orderly crystalline growth and a dense molecular arrangement. X-ray photoelectron spectroscopy and density functional theory using Cambridge Serial Total Energy Package revealed modifications in the spatial and electronic configurations of polyacrylonitrile due to hydrogen bonding, facilitating lithium adsorption capacity up to 13.45 mg/g under optimal conditions. Besides, kinetics and isotherm showed rapid equilibrium within 60 min and confirmed the chemical and selective nature of Li+ uptake. These fibers demonstrated consistent adsorption performance across multiple cycles, highlighting their potential for sustainable use in industrial applications.
| S-EPMC11472274 | biostudies-literature
Project description:Incorporating biomolecules as integral parts of computational systems represents a frontier challenge in bio- and nanotechnology. Using DNA to store digital data is an attractive alternative to conventional information technologies due to its high information density and long lifetime. However, developing an adequate DNA storage medium remains a significant challenge in permitting the safe archiving and retrieval of oligonucleotides. This work introduces composite nucleic acid-polymer fibers as matrix materials for digital information-bearing oligonucleotides. We devised a complete workflow for the stable storage of DNA in PEO, PVA, and PCL fibers by employing electrohydrodynamic processes to produce electrospun nanofibers with embedded oligonucleotides. The on-demand retrieval of messages is afforded by non-hazardous chemical treatment and subsequent PCR amplification and DNA sequencing. Finally, we develop a platform for melt-electrowriting of polymer-DNA composites to produce microfiber meshes of programmable patterns and geometries.
| S-EPMC10792485 | biostudies-literature
Project description:Tailored luminescent guest@metal-organic framework (Guest@MOF) materials with outstanding photophysical properties are enabling materials for emergent technologies in smart sensors and optoelectronics. However, the practical utility of Guest@MOF currently is impaired by its poor stability and difficult-to-handle powder form. Here, we combine a luminescent-sensing Guest@MOF system with a non-luminescent polymer matrix and, for the first time, demonstrated the easy-to-apply electrospinning of luminescent fibers comprising nanocrystals of RhB@ZIF-71 (rhodamine B@zeolitic imidazolate framework-71) homogeneously dispersed in a polyvinylidene difluoride (PVDF) matrix. The luminescence of RhB@ZIF-71/PVDF fiber is tunable and exhibits a quantum yield exceeding 90%. Compared with RhB fluorophore in PVDF fiber, the ZIF-71 (host) protects the nanoconfined RhB guest molecules (especially the J-aggregates of RhB), giving the composite fiber its unique thermofluorochromic response and enhanced thermal stability to 200°C. Our results reveal the exciting opportunities for implementing electrospun luminescent fibers functionalized with bespoke Guest@MOF nanocrystals for multifunctional device applications.
| S-EPMC8430381 | biostudies-literature