Upscaling the urea method synthesis of CoAl layered double hydroxides
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10509544 | biostudies-literature | 2023 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Layered double hydroxides (LDHs) are representative of a 2D anionic clay. Simple and homogeneous synthesis of interlayer-anion-controlled LDH is essential for studies and industrial production. In this study, we report the one-pot synthesis of an LDH that is selective for interlayer anions, which was labeled as "decarboxylation-urea method". We obtained LDHs intercalated with NO3-, Cl-, and SO42- by removing CO2 in this method. The ionic conductivities of the prepared LDHs were investigated for their applicability to electrolytes, and it was found that Zn-Al LDH intercalated with NO3- showed the highest ionic conductivity (18 mS cm-1). Therefore, the LDH intercalated with NO3- synthesized using the decarboxylation-urea method is promising as an alkaline solid electrolyte.
| S-EPMC10552090 | biostudies-literature
Project description:High-entropy materials are compositionally complex materials which often contain five or more elements. The most commonly studied materials in this field are alloys and oxides, where their composition allows for tunable materials properties. High-entropy layered double hydroxides have been recently touted as the next focus for the field of high-entropy materials to expand into. However, most previous work on multi-cationic layered double hydroxides has focused on syntheses with 5 or less cations in the structure. To bridge this gap into high-entropy materials, this work explores the range and extent of different compositional combinations for high-entropy double layered hydroxides. Specifically, pure layered double hydroxides were synthesized with different combinations of 7 cations (Mg, Co, Cu, Zn, Ni, Al, Fe, Cr) as well as one combination of 8 cations by utilizing a hydrothermal synthesis method. Furthermore, magnetic properties of the 8-cation LDH were investigated.
| S-EPMC9475562 | biostudies-literature
Project description:Novel modified Ni/Fe layered double hydroxides with different morphology of spherical - like shape were fabricated via using urea as a ligand and glycerol (Ni/Fe LDH/GL) with Ni:Fe molar ratios of 2:1 by the simplest co -precipitation method. Also, for comparison purposes, Ni/Fe LDH was synthesized to be used as a control one. A suggested interpretation for the morphology change was also given. The materials were characterized by X-ray diffraction (XRD), The Fourier transform infrared (FT - IR) spectroscopy, field emission scanning electron microscopy (FESEM), EDX for elemental analysis, high resolution transmission electron microscopy (HRTEM), Brunauer, Emmett, and Teller (BET) equation, particle size distributions and Zeta potential measurements. In addition, the synthesized materials were used as adsorbents for removal of potassium dichromate from aqueous solutions under various experimental conditions. The adsorption of Cr (VI) was strongly pH dependant and the pHPZC was studied. Kinetic studies were evaluated through different models including, pseudo first and second orders, mixed 1, 2 orders, intra particle diffusion and Avrami models. For adsorption isotherms, two-parameter models (Langmuir, Freundlich and Temkin) and three parameter models (Sips, Langmuir-Freundlich and Tooth) were investigated showing maximum adsorption capacity of 50.43 mg/g and 136.05 mg/g for Ni/Fe LDH and Ni/Fe LDH/GL, respectively. Also, the effect of temperature was investigated at (23, 35, 45, 55 °C) and the thermodynamic parameters (∆H°, ∆S° and ∆G°) were calculated showing exothermic and spontaneous adsorption process. The effect of coexisting anions (Cl-, SO42- and HPO42-) and humic acid at different concentrations on the removal efficiency of dichromate ions was investigated. Chemical stability and recyclability of these adsorbents were also studied. The intermolecular hydrogen bonds formation between dichromate ion, urea, glycerol, LDH was explored by Monte Carlo simulation This study suggested that the modified Ni/Fe LDH/GL materials were promising nanoadsorbents for efficient potassium dichromate removal.
| S-EPMC6969103 | biostudies-literature
Project description:The chemical recycling of poly(ethylene terephthalate) (PET) residues was performed via glycolysis with ethylene glycol (EG) over Mg-Fe and Mg-Al oxide catalysts derived from layered double hydroxides. Catalysts prepared using the high supersaturation method (h.s.c.) presented a higher surface area and larger particles, but this represented less PET conversion than those prepared by the low supersaturation method (l.s.c.). This difference was attributed to the smaller mass transfer limitations inside the (l.s.c.) catalysts. An artificial neural network model well fitted the PET conversion and bis(2-hydroxyethyl) terephthalate (BHET) yield. The influence of Fe in place of Al resulted in a higher PET conversion of the Mg-Fe-h.s.c. catalyst (~95.8%) than of Mg-Al-h.s.c. (~63%). Mg-Fe catalysts could be reused four to five times with final conversions of up to 97% with reaction conditions of EG: PET = 5:1 and catalyst: PET = 0.5%. These results confirm the Mg-Fe oxides as a biocompatible novel catalyst for the chemical recycling of PET residues to obtain non-toxic BHET for further polymerization, and use in food and beverage packaging.
| S-EPMC10422272 | biostudies-literature
Project description:We report a new environmentally-friendly synthetic strategy for large-scale preparation of 16 nm-ultrathin NiCo based layered double hydroxides (LDH). The Ni50Co50-LDH electrode exhibited excellent specific capacitance of 1537 F g(-1) at 0.5 A g(-1) and 1181 F g(-1) even at current density as high as 10 A g(-1), which 50% cobalt doped enhances the electrical conductivity and porous and ultrathin structure is helpful with electrolyte diffusion to improve the material utilization. An asymmetric ultracapacitor was assembled with the N-doped graphitic ordered mesoporous carbon as negative electrode and the NiCo LDH as positive electrode. The device achieves a high energy density of 33.7 Wh kg(-1) (at power density of 551 W kg(-1)) with a 1.5 V operating voltage.
| S-EPMC4709638 | biostudies-literature
Project description:This work is generally focused on the synthesis of NiFeTi-layered double hydroxides (LDHs) using a hydrothermal route, which were calcined at various temperatures (varying from 200 to 600 °C). The synthesized materials were physicochemically characterized. X-ray diffraction results revealed the loss of the layered structure on calcination resulting in the formation of layered double oxides (LDOs) or mixed metal oxides, which was also supported by Fourier transform infrared studies. Scanning electron microscopy results also show loss of the layered structure and the creation of LDOs on increasing the temperature. These LDOs were tested as the catalysts for the synthesis of biologically significant xanthene, 1,4-dihydropyridine, and polyhydroquinoline derivatives. Among all, NiFeTi LDH calcined at 600 °C proved to be the best catalyst for the synthesis of these derivative compounds under optimized conditions. The advantages obtained were excellent yields in a lesser reaction time. Stability and reusability were also assessed; the catalyst was stable even after five cycles. Furthermore, the memory effect of the obtained NiFeTi CLDH calcined at 600 °C confirms that the material so formed is a calcined state of LDH itself. High catalytic efficiency, easy fabrication, and recycling ability of NiFeTi CLDH calcined at 600 °C make it a potential catalyst for the synthesis of xanthene, 1,4-dihydropyridine, and polyhydroquinoline derivatives.
| S-EPMC7331214 | biostudies-literature
Project description:One of the key factors to improve electrochemical properties is to find exceptional electrode materials. In this work, the nickel-cobalt layered double hydroxide (CNT@CoS/NiCo-LDH) with the structure of a hollow nanocage was prepared by etching CNT@CoS with zeolitic imidazolate framework-67 (ZIF-67) as a template. The results show that the addition of nickel has a great influence on the structure, morphology and chemical properties of materials. The prepared material CNT@CoS/NiCo-LDH-100 (C@CS/NCL-100) inherited the rhombic dodecahedral shape of ZIF-67 well and the CNTs were evenly interspersed among the rhombic dodecahedrons. The presence of CNTs improved the conductivity and surface area of the samples. The C@CS/NCL-100 demonstrates a high specific capacitance of 2794.6 F·g-1 at 1 A·g-1. Furthermore, as an assemble device, the device of C@CS/NCL-100 as a positive electrode exhibits a relatively high-energy density of 35.64 Wh·kg-1 at a power density of 750 W·kg-1 Further, even at the high-power density of 3750 W·kg-1, the energy density can still retain 26.38 Wh·kg-1. Hence, the superior performance of C@CS/NCL-100 can be ascribed to the synergy among CNTs, CoS and NiCo LDH, as well as the excellent three-dimensional structure obtained by used ZIF-67 as a template.
| S-EPMC9565481 | biostudies-literature
Project description:Layered double hydroxides (LDHs) constitute a unique group of 2D materials that can deliver exceptional catalytic, optical, and electronic performance. However, they usually suffer from low stability compared to their oxide counterparts. Using density functional calculations, we quantitatively demonstrate the crucial impact of the intercalants (i.e., water, lactate, and carbonate) on the stability of a series of common LDHs based on Mn, Fe, and Co. We found that intercalation with the singly charged lactate results in higher stability in all these LDH compounds, compared to neutral water and doubly charged carbonate. Furthermore, we show that the dispersion effect aids the stability of these LDH compounds. This investigation reveals that certain intercalants enhance LDH stability and alter the bandgap favourably.
| S-EPMC9029406 | biostudies-literature
Project description:We report a general method for the synthesis of core-shell hybrid materials containing a microporous zeolite core with an aqueous miscible organic-layered double hydroxide (AMO-LDH) shell using a simple in situ coprecipitation method. For example, zeolite-HY@AMO-Mg2Al-CO3-LDH contains a 150 nm hierarchical AMO-Mg2Al-CO3-LDH surface coating on zeolite-HY. It exhibits a similar BET surface area (698 m2 g-1) as the parent zeolite-HY but this surface area has been re-allocated between microspores and mesopores. We believe that surface aluminium sites act as nucleation sites for the formation of the LDH coating and so robustly links it into the zeolite lattice. We expect that this new hybrid structure with micropores dominating in the core and mesopores populating the shell will provide a desirable new hybrid structure type for adsorption or catalysis.
| S-EPMC5975924 | biostudies-literature
Project description:Layered double hydroxides are a promising platform material which can be combined with a variety of active species based on their characteristic features. Silicon@P123-templated Ce-doped layered double hydroxide (SiO2@CeMgAl-LDH(P123)) composites were synthesized via a facile in situ co-precipitation method, and characterized by TEM, X-ray diffraction, FTIR, XPS, CO2-, etc. in detail. Meanwhile, the calcined powder (SiO2@CeMgAl-LDO(P123)) possessed an excellent core-shell structure and a high surface area inherited from the LDH structure, which led to an outstanding catalytic activity (99.7% conversion of propylene oxide, 92.4% selectivity of propylene glycol methyl ether) under mild reaction conditions (120 °C). Cerium oxide provides a large number of oxygen vacancies and significantly improves the medium basic strength of the material, which facilitates the selective ring-opening of PO. Furthermore, the introduction and removal of P123 make the cerium oxide uniformly dispersed on the LDH layers, providing more reaction sites for the reaction of methanol and propylene oxide. The core-shell structure prepared by the in situ co-precipitation method could solve the shortcomings of agglomeration of layered double hydroxides and prolong the catalytic life evidently.
| S-EPMC8695133 | biostudies-literature