Dataset Information

Simultaneous adsorption of Cu(II), Zn(II), Cd(II) and Pb(II) from synthetic wastewater using NaP and LTA zeolites prepared from biomass fly ash.

ABSTRACT: Herein, NaP and LTA zeolites were successfully synthesised from woody biomass ash with alkali fusion-assisted hydrothermal method by altering the NaOH/ash ratio, crystallisation time and crystallisation temperature. In order to reduce the synthesis costs, NaP zeolite was synthesised with no additional source of aluminium and silicon. The synthesised zeolites were utilized for the monocomponent and simultaneous adsorption of Cu(II), Cd(II), Pb(II) and Zn(II) ions. The maximum adsorbed amount of metals had the trend Pb(II) > Cu(II) > Cd(II) > Zn(II) for both NaP and LTA zeolite. The kinetic data fit well to the pseudo-second order model indicating that chemisorption is the rate-limiting step. The isotherm data were well described with Sips and Redlich-Peterson models indicating a non-ideal heterogeneous adsorption process. Maximum adsorption capacity of NaP zeolite was 42.9 mg/g for Cu(II) and 117.3 mg/g for Cd(II), while LTA had 140.1 mg/g and 223.5 mg/g for Cu(II) and Cd(II) ions, respectively.

SUBMITTER: Kucuk ME

PROVIDER: S-EPMC10556607 | biostudies-literature | 2023 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Simultaneous adsorption of Cu(II), Zn(II), Cd(II) and Pb(II) from synthetic wastewater using NaP and LTA zeolites prepared from biomass fly ash.

Küçük Mehmet Emin ME Makarava Iryna I Kinnarinen Teemu T Häkkinen Antti A

Heliyon 20230921 10

Herein, NaP and LTA zeolites were successfully synthesised from woody biomass ash with alkali fusion-assisted hydrothermal method by altering the NaOH/ash ratio, crystallisation time and crystallisation temperature. In order to reduce the synthesis costs, NaP zeolite was synthesised with no additional source of aluminium and silicon. The synthesised zeolites were utilized for the monocomponent and simultaneous adsorption of Cu(II), Cd(II), Pb(II) and Zn(II) ions. The maximum adsorbed amount of m ...[more]

PMID: 37810836

Similar Datasets

Project description:Fly ash (FA) fractions with a particle size of 63 µm < FA < 250 µm obtained by sieve fractionation were used as a partial carbon black (CB) replacement in a rubber mixture based on styrene-butadiene rubber (SBR). In order to improve the interactions at the interface between rubber and fractionated ash, at the stage of preparing the rubber mixtures, two different vinyl silanes were added to the system: Vinyltrimethoxysilane (U-611) or Vinyl-tris (2-methoxy-ethoxy) silane (LUVOMAXX VTMOEO DL50), silane with epoxy groups: 3-(glycidoxypropyl)trimethoxysilane (U-50) or sulfur functionalized silanes: containing sulfide bridges: Bis(triethoxysilylpropyl)polysulfide silane (Si-266) or mercapto groups: Mercaptopropyltrimethoxysilane (Dynaslan MTMO). The conducted research confirmed the effectiveness of silanization with selected functional silanes, from the point of view of improving the processing and operational properties of vulcanizates, in which CB is partially replaced with the finest fractions of fly ash. The silanization generally increased the interaction at the rubber-ash interface, while improving the degree of filler dispersion in the rubber mixture. The results of TGA and FTIR analyses confirmed the presence of silanes chemically bonded to the surface of fly ash particles. SEM tests and determination of the bound rubber (BdR) content show that the introduction of the silanes to the mixture increases the degree of ash dispersion (DI) and the Payne effect, which is the greatest when mercaptosilane was used for modification. The highest increase in torque, which was recorded in the case of rubber mixtures containing sulfur silanes and silane with epoxy groups, may be due to their participation in the vulcanization process, which is confirmed by the results of vulcametric studies. The lowest values of mechanical strength, elongation at break, and the highest hardness of vulcanizates obtained in this case may be the result of the over-crosslinking of the rubber. The addition of sulfur-containing silanes significantly slowed down the vulcanization process, which is particularly visible (up to three times extension of the t90 parameter, compared to mixtures without silane) in the case of Si-266. The addition of silanes, except for Si-266 (with a polysulfide fragment), generally improved the abrasion resistance of vulcanizates. The Dynaslan MTMO silane (with mercapto groups) performs best in this respect. Proper selection of silane for the finest fraction of fly ash in the rubber mixtures tested allows for an increase in the mechanical strength of their vulcanizates from 9.1 to 17 MPa, elongation at break from 290 to 500%, hardness from 68 to 74 °ShA, and reduction in abrasion from 171 to 147 mm3.

Dataset Information

Simultaneous adsorption of Cu(II), Zn(II), Cd(II) and Pb(II) from synthetic wastewater using NaP and LTA zeolites prepared from biomass fly ash.

Publications

Simultaneous adsorption of Cu(II), Zn(II), Cd(II) and Pb(II) from synthetic wastewater using NaP and LTA zeolites prepared from biomass fly ash.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets