Stability of Carbon Supported Silver Electrocatalysts for Alkaline Oxygen Reduction and Evolution Reactions
Ontology highlight
ABSTRACT:
SUBMITTER: Linge J
PROVIDER: S-EPMC10685861 | biostudies-literature | 2023 Nov
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Porous Pt electrocatalysts have been developed as an example of carbon-free porous metal catalysts in anticipation of polymer electrolyte membrane (PEM) fuel cells and PEM water electrolyzers through the assembly of the metal precursor and surfactant. In this study, porous Pt was structurally evaluated and found to have a porous structure composed of connected Pt particles. The resulting specific electrochemical surface area (ECSA) of porous Pt was 12.4 m2 g-1, which was higher than that of commercially available Pt black. Accordingly, porous Pt showed higher oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activity than Pt black. When the activity was compared to that of a common carbon-supported electrocatalyst, Pt/ketjen black (KB), porous Pt showed a comparable ORR current density (2.5 mA cm-2 at 0.9 V for Pt/KB and 2.1 mA cm-2 at 0.9 V for porous Pt), and OER current density (6.8 mA cm-2 at 1.8 V for Pt/KB and 7.0 mA cm-1 at 1.8 V), even though the ECSA of porous Pt was only one-sixth that of Pt/KB. Moreover, it exhibited a higher durability against 1.8 V. In addition, when catalyst layers were spray-printed on the Nafion® membrane, porous Pt displayed more uniform layers in comparison to Pt black, showing an advantage in its usage as a thin layer.
| S-EPMC7287804 | biostudies-literature
Project description:A series of nanocomposites of cobalt embedded in N-doped nanoporous carbons, carbon nanotubes or hollow carbon onions have been synthesized by a one-step carbonization of metal-organic-framework ZIF-67. The effect of the carbonization temperature on the structural evolution of the resulting nanocomposites has been investigated in detail. Among the as-synthesized materials, the cobalt/nanoporous N-doped carbon composites have demonstrated excellent electrocatalytic activities and durability towards oxygen reduction reaction in alkaline medium. Compared to the benchmark Pt/C catalyst, the optimized Co@C-800 (carbonized at 800 °C) exhibited high oxygen reduction reaction activity with an onset potential of 0.92 V, and a half-wave potential of 0.82 V. Moreover, the optimized Co@C-800 also showed enhanced electrocatalytic activity towards oxygen evolution reaction from water splitting, with a low onset potential of 1.43 V and a potential of 1.61 V at 10 mA cm-2 current density. This work offered a simple solution to develop metal-organic-framework-derived materials for highly efficient electrochemical applications.
| S-EPMC5509653 | biostudies-literature
Project description:The identification of electrocatalysts mediating both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are prerequisite for the development of reversible fuel cells and rechargeable metal-air batteries. The question remains as to whether a bifunctional catalyst, or a single catalyst site, will exhibit potentials converging to +1.23 VRHE. Transition metal-based perovskites provide tunable catalysts where site substitution can influence both ORR and OER, however substitution in the pseudo-binary phases results in an anti-correlation in ORR and OER activities. We reveal that La x Mn y Ni1-y O3-δ , compositions with lanthanum A-site sub-stoichiometry exhibit reversible activity correlating with the appearance of the Mn3+/Mn4+ redox couple. The Mn3+/Mn4+ couple is associated with Mn4+ co-existing with Mn3+ in the bulk, as La3+ is substituted by Ni2+ at the A-site to create a mixed valent system. We also show that a direct A-site substitution by the Ca2+ cation in La x Ca1-x Mn y O3-δ perovskites also results in the creation of Mn4+, the appearance of the Mn3+/Mn4+ redox couple, and a concomitant reversible activity. These results highlight a general strategy of optimizing oxide electrocatalysts with reversible activity.
| S-EPMC6492633 | biostudies-literature
Project description:Increasing the loading density of nanoparticles on carbon support is essential for making Pt-alloy/C catalysts practical in H2-air fuel cells. The challenge lies in increasing the loading while suppressing the sintering of Pt-alloy nanoparticles. This work presents a 40% Pt-weighted sub-4 nm PtCo/C alloy catalyst via a simple incipient wetness impregnation method. By carefully optimizing the synthetic conditions such as Pt/Co ratios, calcination temperature, and time, the size of supported PtCo alloy nanoparticles is successfully controlled below 4 nm, and a high electrochemical surface area of 93.8 m2/g is achieved, which is 3.4 times that of commercial PtCo/C-TKK catalysts. Demonstrated by electrochemical oxygen reduction reactions, PtCo/C alloy catalysts present an enhanced mass activity of 0.465 A/mg at 0.9 V vs. RHE, which is 2.0 times that of the PtCo/C-TKK catalyst. Therefore, the developed PtCo/C alloy catalyst has the potential to be a highly practical catalyst for H2-air fuel cells.
| S-EPMC10458021 | biostudies-literature
Project description:Currently, the development of nonmetallic oxygen reduction reaction (ORR) catalysts based on heteroatomic-doped carbon materials is receiving increaseing attention in the field of fuel cells. Here, we used enzymolytic lignin (EL), melamine, and thiourea as carbon, nitrogen, and sulfur sources and NH4Cl as an activator to prepare N- and S-codoped lignin-based polyporous carbon (ELC) by one-step pyrolysis. The prepared lignin-derived biocarbon material (ELC-1-900) possessed a high specific surface area (844 m2 g-1), abundant mesoporous structure, and a large pore volume (0.587 cm3 g-1). The XPS results showed that ELC-1-900 was successfully doped with N and S. ELC-1-900 exhibited extremely high activity and stability in alkaline media for the ORR, with a half-wave potential (E1/2 = 0.88 V) and starting potential (Eonset = 0.98 V) superior to those of Pt/C catalysts and most non-noble-metal catalysts reported in recent studies. In addition, ELC-1-900 showed better ORR stability and methanol tolerance in alkaline media than commercial Pt/C catalysts.
| S-EPMC10745107 | biostudies-literature
Project description:In this work, defect-rich ordered mesoporous spinel oxides, including CoCo2O4, NiCo2O4, and ZnCo2O4, were developed as bifunctional electrocatalysts toward oxygen reduction and evolution reactions (ORR and OER, respectively). The materials are synthesized via nanocasting and modified by chemical treatment with 0.1 M NaBH4 solution to enhance the defect concentration. The synthesized samples have metal and oxygen divacancies (VCo + VO) as the primary defect sites, as indicated by positron annihilation lifetime spectroscopy (PALS). Cation substitution in the spinel structure induces a higher number of oxygen vacancies. The increased number of surface defects and the synergistic effect between two incorporated metals provide a high activity in both the OER and ORR in the case of NiCo2O4 and ZnCo2O4. Especially, ZnCo2O4 exhibits the highest OER/ORR activity. The defect engineering with 0.1 M NaBH4 solution results in a metal-hydroxylated surface (M-OH) and enhanced the catalytic activity for the post-treated metal oxides in the ORR and OER. This fundamental investigation of the defective structure of the mixed metal oxides offers some useful insights into further development of highly active electrocatalysts through defect engineering methods.
| S-EPMC9136850 | biostudies-literature
Project description:Ag can form core-shell structures with other non-precious transition metals, which is a promising candidate as an efficient and cost-effective electrocatalyst to replace Pt and RuO2 for oxygen reduction and evolution reactions (ORR and OER) in fuel cells and metal-air batteries. In this paper, polyicosahedral (plh) Ag32X6 (X = 3d transition metals) core-shell structures are calculated systematically by the density functional theory (DFT) method to predict their electrocatalytic activities for ORR and OER. It is found that the strain on the outer shell of the core-shell structures can be an intrinsic descriptor that describes the bifunctional catalytic activities of the catalysts. A higher compressive strain leads to more positive charge on the surface of the shell and consequently higher catalytic activities. The results provide a theoretical base for the rational design and screening of the Ag-based core-shell catalysts for clean energy conversion and storage.
| S-EPMC9059333 | biostudies-literature
Project description:Molybdenum carbide (Mo2C) with a Pt-like d-band electron structure exhibits certain activities for oxygen reduction and evolution reactions (ORR/OER) in alkaline solutions, but it is questioned due to its poor OER stability. Combining Mo2C with transition metals alloy is a feasible way to stabilize its electrochemical activity. Herein, CoFe-Prussian blue analogues are used as a precursor to compound with graphitic carbon nitride and Mo6+ to synthesize FeCo alloy and Mo2C co-encapsulated N-doped carbon (NG-CoFe/Mo2C). The morphology of NG-CoFe/Mo2C (800 °C) shows that CoFe/Mo2C heterojunctions are well wrapped by N-doped graphitic carbon. Carbon coating not only inhibits growth and agglomeration of Mo2C/CoFe, but also enhances corrosion resistance of NG-CoFe/Mo2C. NG-CoFe/Mo2C (800 °C) exhibits an excellent half-wave potential (E1/2 = 0.880 V) for ORR. It also obtains a lower OER overpotential (325 mV) than RuO2 due to the formation of active species (CoOOH/β-FeOOH, as indicated by in-situ X-ray diffraction tests). E1/2 shifts only 6 mV after 5000 ORR cycles, while overpotential for OER increases only 19 mV after 1000 cycles. ORR/OER performances of NG-CoFe/Mo2C (800 °C) are close to or better than those of many recently reported catalysts. It provides an interfacial engineering strategy to enhance the intrinsic activity and stability of carbides modified by transition-metals alloy for oxygen electrocatalysis.
| S-EPMC9920335 | biostudies-literature
Project description:The present research provides a study of carbon-supported intermetallic Pt-alloy electrocatalysts and assesses their stability against metal dissolution in relation to the operating temperature and the potential window using two advanced electrochemical methodologies: (i) the in-house designed high-temperature disk electrode (HT-DE) methodology as well as (ii) a modification of the electrochemical flow cell coupled to an inductively coupled plasma mass spectrometer (EFC-ICP-MS) methodology, allowing for highly sensitive time- and potential-resolved measurements of metal dissolution. While the rate of carbon corrosion follows the Arrhenius law and increases exponentially with temperature, the findings of the present study contradict the generally accepted hypothesis that the kinetics of Pt and subsequently the less noble metal dissolution are supposed to be for the most part unaffected by temperature. On the contrary, clear evidence is presented that in addition to the importance of the voltage/potential window, the temperature is one of the most critical parameters governing the stability of Pt and thus, in the case of Pt-alloy electrocatalysts, also the ability of the nanoparticles (NPs) to retain the less noble metal. Lastly, but also very importantly, results indicate that the rate of Pt redeposition significantly increases with temperature, which has been the main reason why mechanistic interpretation of the temperature-dependent kinetics related to the stability of Pt remained highly speculative until now.
| S-EPMC8749953 | biostudies-literature
Project description:Carbon-based electrocatalysts are more durable and cost-effective than noble materials for the oxygen reduction reaction (ORR), which is an important process in energy conversion technologies. Heteroatoms are considered responsible for the excellent ORR performance in many carbon-based electrocatalysts. But whether an all-carbon electrocatalyst can effectively reduce oxygen is unknown. We subtly engineered the interfaces between planar graphene sheets and curved carbon nanotubes (G-CNT) and gained a remarkable activity/selectivity for ORR (larger current, and n = 3.86, ~93% hydroxide + ~7% peroxide). This performance is close to that of Pt; and the durability is much better than Pt. We further demonstrate the application of this G-CNT hybrid as an all-carbon cathode catalyst for lithium oxygen batteries.We speculate that the high ORR activity of this G-CNT hybrid stems from the localized charge separation at the interface of the graphene and carbon nanotube, which results from the tunneling electron transfer due to the Fermi level mismatch on the planar and curved sp(2) surfaces. Our result represents a conceptual breakthrough and pioneers the new avenues towards practical all-carbon electrocatalysis.
| S-EPMC4164027 | biostudies-literature