Chemical Scissors Tailored Nano-Tellurium with High-Entropy Morphology for Efficient Foam-Hydrogel-Based Solar Photothermal Evaporators
Ontology highlight
ABSTRACT:
SUBMITTER: Xing C
PROVIDER: S-EPMC10709277 | biostudies-literature | 2023 Dec
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The development of technology for solar interface evaporation has a significant meaning for the sustainable use of water resources in remote regions. However, establishing a solar evaporator with a high evaporation rate and favorable water treatment capabilities remains challenging. In this work, we reported a silver nanoparticle (AgNP)@carbonized cattail (CC)/polyvinyl alcohol (PVA) composite hydrogel (ACPH) membrane. Because of the successfully loaded AgNPs, which have a photothermal synergy with the CC, the ACPH-10 membrane obtained an excellent photothermal conversion performance. Additionally, the hydrophilicity of the ACPH-10 membrane ensures a sustainable water supply which is necessary for the improvement of the evaporation rate. Therefore, the ACPH-10 membrane achieves an evaporation rate of 1.66 kg m-2 h-1 and an efficiency of 88.0%, attributed to the remarkable photothermal conversion and water transmission. More importantly, the membrane exhibits superior purification ability in a variety of sewage. Pollutant removal rates in heavy metal and organic dye sewage have exceeded 99.8%. As a result, the ACPH membrane holds great promise for wastewater recovery and seawater desalination, which can aid in resolving the water crisis issue.
| S-EPMC9919770 | biostudies-literature
Project description:Nanophotonic materials for solar energy harvesting and photothermal conversion are urgently needed to alleviate the global energy crisis. We demonstrate that a broadband absorber made of tellurium (Te) nanoparticles with a wide size distribution can absorb more than 85% solar radiation in the entire spectrum. Temperature of the absorber irradiated by sunlight can increase from 29° to 85°C within 100 s. By dispersing Te nanoparticles into water, the water evaporation rate is improved by three times under solar radiation of 78.9 mW/cm2. This photothermal conversion surpasses that of plasmonic or all-dielectric nanoparticles reported before. We also establish that the unique permittivity of Te is responsible for the high performance. The real part of permittivity experiences a transition from negative to positive in the ultraviolet-visible-near-infrared region, which endows Te nanoparticles with the plasmonic-like and all-dielectric duality. The total absorption covers the entire spectrum of solar radiation due to the enhancement by both plasmonic-like and Mie-type resonances. It is the first reported material that simultaneously has plasmonic-like and all-dielectric properties in the solar radiation region. These findings suggest that the Te nanoparticle can be expected to be an advanced photothermal conversion material for solar-enabled water evaporation.
| S-EPMC6086617 | biostudies-literature
Project description:The accelerated increase in freshwater demand, particularly among populations displaced in remote locations where conventional water sources and the infrastructure required to produce potable water may be completely absent, highlights the urgent need in creating additional freshwater supply from untapped alternative sources via energy-efficient solutions. Herein, we present a hydrophilic and self-floating photothermal foam that can generate potable water from seawater and atmospheric moisture via solar-driven evaporation at its interface. Specifically, the foam shows an excellent solar-evaporation rate of 1.89 kg m-2 h-1 with a solar-to-vapor conversion efficiency of 92.7% under 1-Sun illumination. The collected water is shown to be suitable for potable use because when synthetic seawater samples (3.5 wt %) are used, the foam is able to cause at least 99.99% of salinity reduction. The foam can also be repeatedly used in multiple hydration-dehydration cycles, consisting of moisture absorption or water collection, followed by solar-driven evaporation; in each cycle, 1 g of the foam can harvest 250-1770 mg of water. To the best of our knowledge, this is the first report of a material that integrates all the desirable properties for solar evaporation, water collection, and atmospheric-water harvesting. The lightweight and versatility of the foam suggest that the developed foams can be a potent solution for water efficiency, especially for off-grid situations.
| S-EPMC7997105 | biostudies-literature
Project description:Recently, solar-driven interfacial evaporation (SDIE) has been developed quickly for low-cost and sustainable seawater desalination, but addressing the conflict between a high evaporation rate and salt rejection during SDIE is still challenging. Here, a spatial confinement strategy is proposed to prepare the gel composite solar evaporator (SCE) by loading one thin hydrogel layer onto the skeleton of a carbon aerogel. The SCE retains the hierarchically porous structure of carbon aerogels with an optimized water supply induced by dual-driven forces (capillary effects and osmotic pressure) and takes advantage of both aerogels and hydrogels, which can gain energy from air and reduce water enthalpy. The SCE has a high evaporation rate (up to 4.23 kg m-2 h-1 under one sun) and excellent salt rejection performance and can maintain structural integrity after long-term evaporation even at high salinities. The SDIE behavior, including heat distribution, water transport, and salt ion distribution, is investigated by combining theoretical simulations and experimental results. This work provides new inspiration and a theoretical basis for the development of high-performance interfacial evaporators.
| S-EPMC11538639 | biostudies-literature
Project description:The photothermal conversion properties of tellurium (Te) nanoparticles have been extensively investigated, rendering them a promising candidate for tumor photothermal therapy. However, there is still room for improvement in the development of efficient Te-based drug delivery systems. Here, Te nanoparticles are mineralized with bioactive molecules within attenuated Salmonella (S-Te), which are subsequently taken up by macrophages (RAW264.7) to construct a double-camouflaged delivery platform (RS-Te). Remarkably, RS-Te retains superior photothermal properties under near-infrared irradiation. The mineralization process eliminates bacterial proliferation potential, thereby mitigating the risk of excessive bacterial growth in vivo. Furthermore, the uptake of bacteria by macrophages not only polarizes them into M1 macrophages to induce an anti-tumor immune response but also circumvents any adverse effects caused by complex antigens on the bacterial surface. The results show that RS-Te can effectively accumulate and retain in tumors. RS-Te-mediated photothermal immunotherapy largely promotes the maturation of dendritic cells and priming of cytotoxic T cells induced by near-infrared laser irradiation. Moreover, RS-Te can switch the activation of macrophages from an immunosuppressive M2 phenotype to a more inflammatory M1 state. The double-camouflaged delivery system may offer highly efficient and safe cancer treatment.
| S-EPMC11462725 | biostudies-literature
Project description:Direct solar desalination exhibits considerable potential for alleviating the global freshwater crisis. However, the prevention of salt accumulation while maintaining high water production remains an important challenge that limits its practical applications because the methods currently employed for achieving rapid salt backflow usually result in considerable heat loss. Herein, we fabricate a solar evaporator featuring vertically aligned mass transfer bridges for water transport and salt backflow. The 3D open architecture constructed using mass transfer bridges enables the evaporator to efficiently utilize the conductive heat that would otherwise be lost, significantly improving the water evaporation efficiency without compromising on salt rejection. The fabricated evaporator can treat salt water with more than 10% salinity. Moreover, it can continuously and steadily work in a real environment under natural sunlight with a practical solar-to-water collection efficiency of >40%. Using the discharged water from reverse osmosis plants and sea water from the Red Sea, the evaporator demonstrates a daily freshwater generation rate of ~5 L/m2, which is sufficient to satisfy individual drinking water requirements. With strong salt rejection, high energy efficiency, and simple scalability, the 3D evaporator has considerable promise for freshwater supply for water-stressed and off-grid communities.
| S-EPMC9636182 | biostudies-literature
Project description:Plasmonic nanoparticles, such as gold nanoparticles (AuNPs), have been actively applied in solar vapor generation for seawater desalination and water purification, owing to their photothermal heating performances. Such nanoparticles have been frequently anchored within porous supporting materials to ensure easy handling and water absorption. However, there has been limited progress in improving the transport efficiency of light to nanoparticles within porous supports to achieve more effective photothermal heating. Here, we show an enhanced light absorption of AuNPs by supporting on a cellulose paper with tailored porous structures for efficient photothermal heating. The paper consists of AuNP-anchored cellulose nanofibers and cellulose pulp as the top and bottom layers, respectively, which provides dual-layered porous nano-microstructures in the perpendicular direction. Then, the bottom layer with pulp-derived microstructures reflects the transmitted light back to AuNPs within the top layer, which improves their light absorptivity. Thus, under 1 sun illumination, the dual-layered paper demonstrates superior performance in photothermal heating (increases from 28 °C to 46 °C) and solar vapor generation (1.72 kg m-2 h-1) compared with the single-layered AuNP-anchored cellulose nanofiber paper even at the same AuNP content. Furthermore, the water evaporation rate per AuNP content of the dual-layered paper is more than 2 times higher than those of the state-of-the-art AuNP-anchored porous materials under the same light irradiation. This strategy enables the efficient use of precious plasmonic nanoparticles for further development of solar vapor generation.
| S-EPMC9417936 | biostudies-literature
Project description:In this work, we analyzed the effects of mineral scaling on the performance of a 3D interfacial solar evaporator, with a focus on the cations relevant to lithium recovery from brackish water. The field has been rapidly moving toward resource recovery applications from brines with higher cation concentrations. However, the potential complications caused by common minerals in these brines other than NaCl have been largely overlooked. Therefore, in this study, we thoroughly examined the effects of two common cations (calcium and magnesium) on the long-term solar evaporation performance of a 3D graphene oxide stalk. The 3D stalk can achieve an evaporation flux as high as 17.8 kg m-2 h-1 under one-sun illumination, and accumulation of NaCl on the stalk surface has no impact. However, the presence of CaCl2 and MgCl2 significantly reduces the evaporative flux even in solutions lacking scale-forming anions. A close examination of scale formation during long-term evaporation experiments revealed that CaCl2 and MgCl2 tend to precipitate out within the stalk, thus blocking water transport through the stalk and significantly dropping the evaporation rates. These findings imply that research attention is needed to modify and optimize the internal water transport channels for 3D evaporators. Additionally, we emphasize the importance of testing realistic mixtures─including prominent divalent cations─ and testing long-term operations in interfacial solar evaporation research and investigating approaches to mitigate the negative impacts of divalent cations.
| S-EPMC11740997 | biostudies-literature
Project description:Nanowire/nanotube memristor devices provide great potential for random-access high-density resistance storage. However, fabricating high-quality and stable memristors is still challenging. This paper reports multileveled resistance states of tellurium (Te) nanotube based on the clean-room free femtosecond laser nano-joining method. The temperature for the entire fabrication process was maintained below 190 °C. A femtosecond laser joining technique was used to form nanowire memristor units with enhanced properties. Femtosecond (fs) laser-irradiated silver-tellurium nanotube-silver structures resulted in plasmonic-enhanced optical joining with minimal local thermal effects. This produced a junction between the Te nanotube and the silver film substrate with enhanced electrical contacts. Noticeable changes in memristor behavior were observed after fs laser irradiation. Capacitor-coupled multilevel memristor behavior was observed. Compared to previous metal oxide nanowire-based memristors, the reported Te nanotube memristor system displayed a nearly two-order stronger current response. The research displays that the multileveled resistance state is rewritable with a negative bias.
| S-EPMC10005240 | biostudies-literature
Project description:Two-dimensional nanomaterial-based photothermal therapy (PTT) is currently under intensive investigation as a promising approach toward curative cancer treatment. However, high toxicity, moderate efficacy, and low uniformity in shape remain critical unresolved issues that hamper their clinical application. Thus, there is an urgent need for developing versatile nanomaterials to meet clinical expectations. To achieve this goal, we developed a stable, highly uniform in size, and nontoxic nanomaterials made of tellurium-selenium (TeSe)-based lateral heterojunction. Systemic delivery of TeSe nanoparticles in mice showed highly specific accumulation in tumors relative to other healthy tissues. Upon exposure to light, TeSe nanoparticles nearly completely eradicated lung cancer and hepatocellular carcinoma in preclinical models. Consistent with tumor suppression, PTT altered the tumor microenvironment and induced immense cancer cell apoptosis. Together, our findings demonstrate an exciting and promising PTT-based approach for cancer eradication.
| S-EPMC7141822 | biostudies-literature