Triplet Upconversion under Ambient Conditions Enables Digital Light Processing 3D Printing
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10906251 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:3D printing is an emerging technology aiming towards personalized drug delivery, among many other applications. Microneedles (MN) are a viable method for transdermal drug delivery that is becoming more popular for delivery through the skin. However, there is a need for a faster fabrication process with potential for easily exploring different geometries of MNs. In the current study, a digital light processing (DLP) method of 3D printing for fabrication of hollow MN arrays using commercial UV curable resin was proposed. Print quality was optimised by assessing the effect of print angle on needle geometries. Mechanical testing of MN arrays was conducted using a texture analyser. Angled prints were found to produce prints with geometries closer to the CAD designs. Curing times were found to affect the mechanical strength of MNs, with arrays not breaking when subjected to 300 N of force but were bent. Overall, DLP process produced hollow MNs with good mechanical strength and depicts a viable, quick, and efficient method for the fabrication of hollow MN arrays.
| S-EPMC8622592 | biostudies-literature
Project description:Three-dimensional (3D) printing or additive manufacturing, as a revolutionary technology for future advanced manufacturing, usually prints parts with poor control of complex gradients for functional applications. We present a single-vat grayscale digital light processing (g-DLP) 3D printing method using grayscale light patterns and a two-stage curing ink to obtain functionally graded materials with the mechanical gradient up to three orders of magnitude and high resolution. To demonstrate the g-DLP, we show the direct fabrication of complex 2D/3D lattices with controlled buckling and deformation sequence, negative Poisson's ratio metamaterial, presurgical models with stiffness variations, composites for 4D printing, and anti-counterfeiting 3D printing.
| S-EPMC6499595 | biostudies-literature
Project description:Additive manufacturing is one of the most promising processing techniques for fabricating customized 3D objects. For the 3D printing of functional and stimuli-triggered devices, interest is steadily growing in processing materials with magnetic properties. Synthesis routes for magneto-responsive soft materials typically involve the dispersion of (nano)particles into a non-magnetic polymer matrix. Above their glass transition temperature, the shape of such composites can be conveniently adjusted by applying an external magnetic field. With their rapid response time, facile controllability, and reversible actuation, magnetically responsive soft materials can be used in the biomedical field (e.g. drug delivery, minimally invasive surgery), soft robotics or in electronic applications. Herein, we combine the magnetic response with thermo-activated healability by introducing magnetic Fe3O4 nanoparticles into a dynamic photopolymer network, which undergoes thermo-activated bond exchange reactions. The resin is based on a radically curable thiol-acrylate system, whose composition is optimized towards processability via digital light processing 3D printing. A mono-functional methacrylate phosphate is applied as a stabilizer to increase the resins' shelf life by preventing thiol-Michael reactions. Once photocured, the organic phosphate further acts as a transesterification catalyst and activates bond exchange reactions at elevated temperature, which render the magneto-active composites mendable and malleable. The healing performance is demonstrated by recovering magnetic and mechanical properties after the thermally triggered mending of 3D-printed structures. We further demonstrate the magnetically driven movement of 3D-printed samples, which gives rise to the potential use of these materials in healable soft devices activated by external magnetic fields.
| S-EPMC10253501 | biostudies-literature
Project description:Although three-dimensional (3D) bioprinting technology has gained much attention in the field of tissue engineering, there are still several significant engineering challenges to overcome, including lack of bioink with biocompatibility and printability. Here, we show a bioink created from silk fibroin (SF) for digital light processing (DLP) 3D bioprinting in tissue engineering applications. The SF-based bioink (Sil-MA) was produced by a methacrylation process using glycidyl methacrylate (GMA) during the fabrication of SF solution. The mechanical and rheological properties of Sil-MA hydrogel proved to be outstanding in experimental testing and can be modulated by varying the Sil-MA contents. This Sil-MA bioink allowed us to build highly complex organ structures, including the heart, vessel, brain, trachea and ear with excellent structural stability and reliable biocompatibility. Sil-MA bioink is well-suited for use in DLP printing process and could be applied to tissue and organ engineering depending on the specific biological requirements.
| S-EPMC5915392 | biostudies-literature
Project description:Digital light processing (DLP) 3D printing has shown great advantages such as high resolution in the fabrication of 3D objects toward a range of applications. Despite the rapid development of photocurable materials for DLP printing, tailoring properties to meet the specific demands for various applications remains challenging. Herein, we introduce copolymers of caprolactone and allyl caprolactone offering built-in functionality for thiol-ene photochemistry, thereby omitting the need for postfunctionalization. A crystalline block copolymer and an amorphous statistical copolymer were synthesized with the same comonomer composition and molecular weight. Thio-ene photocuring with a tetrafunctional thiol cross-linker was studied at different thiol to double-bond ratios for the copolymers and their blends. All formulations undergo rapid photocuring within several seconds of irradiation with slightly higher gel fractions observed for the statistical copolymer over the block copolymer under the same conditions, suggesting a somewhat higher cross-link density. Thermal properties of the networks were dependent on the presence of the semicrystalline block copolymer, where higher melting enthalpies were reached at higher block copolymer content. Similarly, crystallinity was found to be the main contributor to the mechanical properties. For a comparable composition, the modulus of a block copolymer network was found to be 31 times higher than that of the statistical copolymer network (27.7 vs 0.89 MPa). Intermediate moduli could be obtained by blending the two copolymers. DLP-printed scaffolds from these copolymers retained their thermal properties, therefore offering an efficient approach to tailoring mechanical properties, through crystallinity. Moreover, the printed scaffold displayed shape memory properties as the first example of poly(carprolactone) (PCL) copolymers in DLP printing. These materials are readily synthesized, offer fast and high-resolution 3D printing, and are degradable and cell compatible. They offer a straightforward approach to tailoring properties of PCL-based biomaterials and devices.
| S-EPMC11443484 | biostudies-literature
Project description:This study highlights the additive manufacturing of diene-rubbers with digital light processing (DLP). The network formation relies on the crosslinking of a methacrylate-functional liquid isoprene rubber via photo-induced thiol-click chemistry. Bi-functional divinyl ethers are added as reactive diluents, which benefit from a low potential for skin irradiation and skin sensitization. Along with significantly reducing the viscosity, the divinyl ethers accelerate the cure kinetics of the diene-rubber across the main chain C[double bond, length as m-dash]C bonds of the isoprene units. Photo-DSC measurements reveal that the length of the glycol-spacer and the chemical structure (glycol versus alkyl) of the divinyl ether influence the photo-reactivity of the rubber formulations in thiol-ene reactions. In the present study, the highest reactivity is observed for tri(ethylene glycol) divinylether comprising a spacer with three glycol units. To improve the storage stability of the rubber formulation, a radical scavenger is applied to reduce premature crosslinking reactions under dark conditions. With the stabilized liquid rubber formulations, precise 3D structures with features of 0.5 mm are successfully manufactured with bottom-up DLP 3D printing.
| S-EPMC9054738 | biostudies-literature
Project description:Until now, only a few materials are available for additive manufacturing technologies that employ photopolymerization, such as stereolithography (SLA) and digital light processing (DLP) 3D printing systems. This study investigates a newly formulated resins as an alternative 3D printing materials with tunable mechanical properties to expand the potential applications of advanced engineering products such as wearable devices and small reactors. A commercial acrylate-based resin was selected as a standard resin (STD). The resin was formulated by combining various volume ratios of a low-cost polypropylene glycol (PPG) having various molecular weights (400, 1000, and 2000 g/mol) with the STD resin. The printability of the formulated resins was optimized using the digital light processing (DLP) 3D printing technique. The effects of the PPG contents on the properties of the printed parts were studied, including printability, thermal properties, mechanical properties, and thermo-mechanical properties. As a result, the formulated resins with 5-30%vol of PPG could be printed while higher PPG content led to print failure. Results suggest that increasing the PPG contents reduced the dimensional accuracy of the printed parts and decreased the mechanical properties, including the flexural strength, flexural modulus, impact strength, hardness, and elastic modulus. interestingly, at small loading, 5%vol, the mechanical performance of the printed specimens was successfully enhanced. These results are intriguing to use a tunable mechanical acrylate-based resin for a specific application such as a microreactor.
| S-EPMC9681742 | biostudies-literature
Project description:Biofabrication allows for the templating of structural features in materials on cellularly-relevant size scales, enabling the generation of tissue-like structures with controlled form and function. This is particularly relevant for growing organoids, where the application of biochemical and biomechanical stimuli can be used to guide the assembly and differentiation of stem cells and form architectures similar to the parent tissue or organ. Recently, ablative laser-scanning techniques was used to create 3D overhang features in collagen hydrogels at size scales of 10-100µm and supported the crypt-villus architecture in intestinal organoids. As a complementary method, providing advantages for high-throughput patterning, we printed thioester functionalized poly(ethylene glycol) (PEG) elastomers using digital light processing (DLP) and created sacrificial, 3D shapes that could be molded into soft (G' < 1000 Pa) hydrogel substrates. Specifically, three-arm 1.3 kDa PEG thiol and three-arm 1.6 kDa PEG norbornene, containing internal thioester groups, were photopolymerized to yield degradable elastomers. When incubated in a solution of 300 mM 2-mercaptoethanol (pH 9.0), 1 mm thick 10 mm diameter elastomer discs degraded in <2 h. Using DLP, arrays of features with critical dimensions of 37 ± 4µm, resolutions of 22 ± 5µm, and overhang structures as small as 50µm, were printed on the order of minutes. These sacrificial thioester molds with physiologically relevant features were cast-molded into Matrigel and subsequently degraded to create patterned void spaces with high fidelity. Intestinal stem cells (ISCs) cultured on the patterned Matrigel matrices formed confluent monolayers that conformed to the underlying pattern. DLP printed sacrificial thioester elastomer constructs provide a robust and rapid method to fabricate arrays of 3D organoid-sized features in soft tissue culture substrates and should enable investigations into the effect of epithelial geometry and spacing on the growth and differentiation of ISCs.
| S-EPMC8860055 | biostudies-literature
Project description:Novel UV-curable polyurethane acrylate (PUA) resins were developed from rubber seed oil (RSO). Firstly, hydroxylated rubber seed oil (HRSO) was prepared via an alcoholysis reaction of RSO with glycerol, and then HRSO was reacted with isophorone diisocyanate (IPDI) and hydroxyethyl acrylate (HEA) to produce the RSO-based PUA (RSO-PUA) oligomer. FT-IR and 1H NMR spectra collectively revealed that the obtained RSO-PUA was successfully synthesized, and the calculated C=C functionality of oligomer was 2.27 per fatty acid. Subsequently, a series of UV-curable resins were prepared and their ultimate properties, as well as UV-curing kinetics, were investigated. Notably, the UV-cured materials with 40% trimethylolpropane triacrylate (TMPTA) displayed a tensile strength of 11.7 MPa, an adhesion of 2 grade, a pencil hardness of 3H, a flexibility of 2 mm, and a glass transition temperature up to 109.4 °C. Finally, the optimal resin was used for digital light processing (DLP) 3D printing. The critical exposure energy of RSO-PUA (15.20 mJ/cm2) was lower than a commercial resin. In general, this work offered a simple method to prepare woody plant oil-based high-performance PUA resins that could be applied in the 3D printing industry.
| S-EPMC8469773 | biostudies-literature
Project description:As one of the most transplanted tissues of the human body, bone has varying architectures, depending on its anatomical location. Therefore, bone defects ideally require bone substitutes with a similar structure and adequate strength comparable to native bones. Light-based three-dimensional (3D) printing methods allow the fabrication of biomimetic scaffolds with high resolution and mechanical properties that exceed the result of commonly used extrusion-based printing. Digital light processing (DLP) is known for its faster and more accurate printing than other 3D printing approaches. However, the development of biocompatible resins for light-based 3D printing is not as rapid as that of bio-inks for extrusion-based printing. In this study, we developed CSMA-2, a photopolymer based on Isosorbide, a renewable sugar derivative monomer. The CSMA-2 showed suitable rheological properties for DLP printing. Gyroid scaffolds with high resolution were successfully printed. The 3D-printed scaffolds also had a compressive modulus within the range of a human cancellous bone modulus. Human adipose-derived stem cells remained viable for up to 21 days of incubation on the scaffolds. A calcium deposition from the cells was also found on the scaffolds. The stem cells expressed osteogenic markers such as RUNX2, OCN, and OPN. These results indicated that the scaffolds supported the osteogenic differentiation of the progenitor cells. In summary, CSMA-2 is a promising material for 3D printing techniques with high resolution that allow the fabrication of complex biomimetic scaffolds for bone regeneration.
| S-EPMC9687763 | biostudies-literature