Project description:Diversification of raw material for biofuel production is of interest to both academia and industry. One attractive substrate is a renewable lignocellulosic material such as oil palm (Elaeis guineensis Jacq.) empty fruit bunch (OPEFB), which is a byproduct of the palm oil industry. This study aimed to characterize cellulases active against this substrate. Cellulases with activity against OPEFB were identified from a metagenomic library obtained from DNA extracted from a high-Andean forest ecosystem. Our findings show that the highest cellulolytic activities were obtained at pH and temperature ranges of 4-10 and 30 °C-60 °C, respectively. Due to the heterogeneous character of the system, degradation profiles were fitted to a fractal-like kinetic model, evidencing transport mass transfer limitations. The sequence analysis of the metagenomic library inserts revealed three glycosyl hydrolase families. Finally, molecular docking simulations of the cellulases were carried out corroborating possible exoglucanase and β-glucosidase activity.
Project description:The triglucoside of sesaminol, i.e., 2,6-O-di(β-D-glucopyranosyl)-β-D- glucopyranosylsesaminol (STG), occurs abundantly in sesame seeds and sesame oil cake and serves as an inexpensive source for the industrial production of sesaminol, an anti-oxidant that displays a number of bioactivities beneficial to human health. However, STG has been shown to be highly resistant to the action of β-glucosidases, in part due to its branched-chain glycon structure, and these circumstances hampered the efficient utilization of STG. We found that a strain (KB0549) of the genus Paenibacillus produced a novel enzyme capable of efficiently hydrolyzing STG. This enzyme, termed PSTG, was a tetrameric protein consisting of identical subunits with an approximate molecular mass of 80 kDa. The PSTG gene was cloned on the basis of the partial amino acid sequences of the purified enzyme. Sequence comparison showed that the enzyme belonged to the glycoside hydrolase family 3, with significant similarities to the Paenibacillus glucocerebrosidase (63% identity) and to Bgl3B of Thermotoga neapolitana (37% identity). The recombinant enzyme (rPSTG) was highly specific for β-glucosidic linkage, and k cat and k cat/K m values for the rPSTG-catalyzed hydrolysis of p-nitrophenyl-β-glucopyraniside at 37°C and pH 6.5 were 44 s(-1) and 426 s(-1) mM(-1), respectively. The specificity analyses also revealed that the enzyme acted more efficiently on sophorose than on cellobiose and gentiobiose. Thus, rPSTG is the first example of a β-glucosidase with higher reactivity for β-1,2-glucosidic linkage than for β-1,4- and β-1,6-glucosidic linkages, as far as could be ascertained. This unique specificity is, at least in part, responsible for the enzyme's ability to efficiently decompose STG.
Project description:Two novel strains, HW T2.11T and HW T5.17T, were isolated from decaying wood (forest of Champenoux, France). Study of the 16S rRNA sequence similarity indicated that the novel strains belong to the genus Acidisoma. The sequence similarity of the 16S rRNA gene of HW T2.11T with the corresponding sequences of A. tundrae and A. sibiricum was 97.30% and 97.25%, while for HW T5.17T it was 96.85% and 97.14%, respectively. The DNA G+C contents of the strains were 62.32-62.50%. Cells were Gram-negative coccobacilli that had intracellular storage granules (poly-3-hydroxybutyrate (P3HB)) that confer resistance to environmental stress conditions. They were mesophilic and acidophilic organisms growing at 8-25 °C, at a pH of 2.0-6.5, and were capable of using a wide range of organic compounds and complex biopolymers such as starch, fucoidan, laminarin, pectin and cellulose, the latter two being involved in wood composition. The major cellular fatty acid was cyclo C19:0ω8c and the major quinone was Q-10. Overall, genome relatedness indices between genomes of strains HW T2.11T and HW T5.17T (Orthologous Average Nucleotide Identity (OrthoANI) value = 83.73% and digital DNA-DNA hybridization score = 27.5%) confirmed that they belonged to two different species. Genetic predictions indicate that the cyclopropane fatty acid (CFA) pathway is present, conferring acid-resistance properties to the cells. The two novel strains might possess a class IV polyhydroxyalcanoate (PHA) synthase operon involved in the P3HB production pathway. Overall, the polyphasic taxonomic analysis shows that these two novel strains are adapted to harsh environments such as decaying wood where the organic matter is difficult to access, and can contribute to the degradation of dead wood. These strains represent novel species of the genus Acidisoma, for which the names Acidisoma silvae sp. nov. and Acidisomacellulosilytica sp. nov. are proposed. The type strains of Acidisoma silvae and Acidisomacellulosilytica are, respectively, HW T2.11T (DSM 111006T; UBOCC-M-3364T) and HW T5.17T (DSM 111007T; UBOCC-M-3365T).
Project description:BackgroundMicrobes are rich sources of enzymes and esterases are one of the most important classes of enzymes because of their potential for application in the field of food, agriculture, pharmaceuticals and bioremediation. Due to limitations in their cultivation, only a small fraction of the complex microbial communities can be cultured from natural habitats. Thus to explore the catalytic potential of uncultured organisms, the metagenomic approach has turned out to be an effective alternative method for direct mining of enzymes of interest. Based on activity-based screening method, an esterase-positive clone was obtained from metagenomic libraries.ResultsFunctional screening of a soil metagenomic fosmid library, followed by transposon mutagenesis led to the identification of a 1179 bp esterase gene, estM2, that encodes a 392 amino acids long protein (EstM2) with a translated molecular weight of 43.12 kDa. Overproduction, purification and biochemical characterization of the recombinant protein demonstrated carboxylesterase activity towards short-chain fatty acyl esters with optimal activity for p-nitrophenyl butyrate at pH 8.0 and 37 °C. Amino acid sequence analysis and subsequent phylogenetic analysis suggested that EstM2 belongs to the family VIII esterases that bear modest similarities to class C β-lactamases. EstM2 possessed the conserved S-x-x-K motif of class C β-lactamases but did not exhibit β-lactamase activity. Guided by molecular docking analysis, EstM2 was shown to hydrolyze a wide range of di- and monoesters of alkyl-, aryl- and benzyl-substituted phthalates. Thus, EstM2 displays an atypical hydrolytic potential of biotechnological significance within family VIII esterases.ConclusionsThis study has led to the discovery of a new member of family VIII esterases. To the best of our knowledge, this is the first phthalate hydrolase (EstM2), isolated from a soil metagenomic library that belongs to a family possessing β-lactamase like catalytic triad. Based on its catalytic potential towards hydrolysis of both phthalate diesters and phthalate monoesters, this enzyme may find use to counter the growing pollution caused by phthalate-based plasticizers in diverse geological environment and in other aspects of biotechnological applications.
Project description:BackgroundEnzyme end-product inhibition is a major challenge in the hydrolysis of lignocellulose at a high dry matter consistency. β-glucosidases (BGs) hydrolyze cellobiose into two molecules of glucose, thereby relieving the product inhibition of cellobiohydrolases (CBHs). However, BG inhibition by glucose will eventually lead to the accumulation of cellobiose and the inhibition of CBHs. Therefore, the kinetic properties of candidate BGs must meet the requirements determined by both the kinetic properties of CBHs and the set-up of the hydrolysis process.ResultsThe kinetics of cellobiose hydrolysis and glucose inhibition of thermostable BGs from Acremonium thermophilum (AtBG3) and Thermoascus aurantiacus (TaBG3) was studied and compared to Aspergillus sp. BG purified from Novozyme®188 (N188BG). The most efficient cellobiose hydrolysis was achieved with TaBG3, followed by AtBG3 and N188BG, whereas the enzyme most sensitive to glucose inhibition was AtBG3, followed by TaBG3 and N188BG. The use of higher temperatures had an advantage in both increasing the catalytic efficiency and relieving the product inhibition of the enzymes. Our data, together with data from a literature survey, revealed a trade-off between the strength of glucose inhibition and the affinity for cellobiose; therefore, glucose-tolerant BGs tend to have low specificity constants for cellobiose hydrolysis. However, although a high specificity constant is always an advantage, in separate hydrolysis and fermentation, the priority may be given to a higher tolerance to glucose inhibition.ConclusionsThe specificity constant for cellobiose hydrolysis and the inhibition constant for glucose are the most important kinetic parameters in selecting BGs to support cellulases in cellulose hydrolysis.
Project description:BackgroundAs a green alternative for the production of transportation fuels, the enzymatic hydrolysis of lignocellulose and subsequent fermentation to ethanol are being intensively researched. To be economically feasible, the hydrolysis of lignocellulose must be conducted at a high concentration of solids, which results in high concentrations of hydrolysis end-products, cellobiose and glucose, making the relief of product inhibition of cellulases a major challenge in the process. However, little quantitative information on the product inhibition of individual cellulases acting on cellulose substrates is available because it is experimentally difficult to assess the hydrolysis of the heterogeneous polymeric substrate in the high background of added products.ResultsThe cellobiose and glucose inhibition of thermostable cellulases from Acremonium thermophilum, Thermoascus aurantiacus, and Chaetomium thermophilum acting on uniformly 14C-labeled bacterial cellulose and its derivatives, 14C-bacterial microcrystalline cellulose and 14C-amorphous cellulose, was studied. Cellulases from Trichoderma reesei were used for comparison. The enzymes most sensitive to cellobiose inhibition were glycoside hydrolase (GH) family 7 cellobiohydrolases (CBHs), followed by family 6 CBHs and endoglucanases (EGs). The strength of glucose inhibition followed the same order. The product inhibition of all enzymes was relieved at higher temperatures. The inhibition strength measured for GH7 CBHs with low molecular-weight model substrates did not correlate with that measured with 14C-cellulose substrates.ConclusionsGH7 CBHs are the primary targets for product inhibition of the synergistic hydrolysis of cellulose. The inhibition must be studied on cellulose substrates instead of on low molecular-weight model substrates when selecting enzymes for lignocellulose hydrolysis. The advantages of using higher temperatures are an increase in the catalytic efficiency of enzymes and the relief of product inhibition.
Project description:Improved understanding of heterogeneous cellulose hydrolysis by cellulases is the basis for optimising enzymatic catalysis-based cellulosic biorefineries. A detailed mechanistic model is developed to describe the dynamic adsorption/desorption and synergistic chain-end scissions of cellulases (endoglucanase, exoglucanase, and β-glucosidase) upon amorphous cellulose. The model can predict evolutions of the chain lengths of insoluble cellulose polymers and production of soluble sugars during hydrolysis. Simultaneously, a modelling framework for uncertainty analysis is built based on a quasi-Monte-Carlo method and global sensitivity analysis, which can systematically identify key parameters, help refine the model and improve its identifiability. The model, initially comprising 27 parameters, is found to be over-parameterized with structural and practical identification problems under usual operating conditions (low enzyme loadings). The parameter estimation problem is therefore mathematically ill posed. The framework allows us, on the one hand, to identify a subset of 13 crucial parameters, of which more accurate confidence intervals are estimated using a given experimental dataset, and, on the other hand, to overcome the identification problems. The model's predictive capability is checked against an independent set of experimental data. Finally, the optimal composition of cellulases cocktail is obtained by model-based optimisation both for enzymatic hydrolysis and for the process of simultaneous saccharification and fermentation.
Project description:1. A crude cellulase extract was prepared from the hepatopancreas of a marine mollusc, Dolabella sp., and partially purified by ammonium sulphate fractionation. 2. The optimum pH values of the partially purified preparation were 6.5 and 8.0 for Walseth cellulose and CM-cellulose respectively. It was most stable at pH6.0 and showed moderate thermostability. 3. The partially purified preparation was subjected to starch-zone electrophoresis, and incompletely resolved into several fractions that contained one or more cellulase components of different substrate specificity. 4. Some of these cellulase fractions showed practically no aryl beta-glucosidase activity and hydrolysed aryl beta-cellobioside with difficulty. From substrates such as higher cello-oligosaccharides, cellodextrin, CM-cellulose, Walseth cellulose and cotton fibre, they produced cellobiose as the major and cellotriose as the minor end products, both of which were resistant to further attack by cellulase. 5. From the slope of the curves of viscosity-reducing power for CM-cellulose, the cellulase components from Dolabella were presumed to be of a ;more-random' or a ;less-random' type in the mode of action. 6. In the hepatopancreas of this mollusc, beta-glucosidases were also present, which hydrolysed cellobiose as well as aryl beta-glucosides. The optimum pH values of these enzymes were about 5.5.
Project description:Biofilm commonly forms on the surfaces of cellulosic biomass but its roles in cellulose degradation remain largely unexplored. We used Bacillus subtilis to study possible mechanisms and the contributions of two major biofilm components, extracellular polysaccharides (EPS) and TasA protein, to submerged biofilm formation on cellulose and its degradation. We found that biofilm produced by B. subtilis is able to absorb exogenous cellulase added to the culture medium and also retain self-produced cellulase within the biofilm matrix. The bacteria that produced more biofilm degraded more cellulose compared to strains that produced less biofilm. Knockout strains that lacked both EPS and TasA formed a smaller amount of submerged biofilm on cellulose than the wild-type strain and also degraded less cellulose. Imaging of biofilm on cellulose suggests that bacteria, cellulose, and cellulases form cellulolytic biofilm complexes that facilitate synergistic cellulose degradation. This study brings additional insight into the important functions of biofilm in cellulose degradation and could potentiate the development of biofilm-based technology to enhance biomass degradation for biofuel production.