Project description:Alcohol oxidation reactions are widely used for the preparation of aldehydes and ketones. The electrolysis of alcohols to carbonyl compounds have been underutilized owing to low efficiency. Herein, we report an electrochemical oxidation of various alcohols in a continuous-flow reactor without external oxidants, base or mediators. The robust electrochemical oxidation is performed for a variety of alcohols with good functional group tolerance, high efficiency and atom economy, whereas mechanistic studies support the benzylic radical intermediate formation and hydrogen evolution. The electrochemical oxidation proves viable on diols with excellent levels of selectivity for the benzylic position.
Project description:Highly processible graphene oxide (GO) has a diversity of applications as a material readily dispersed in aqueous media. However, methods for preparing such free-standing GO use hazardous and toxic reagents and generate significant waste streams. This is an impediment for uptake of GO in any application, for developing sustainable technologies and industries, and overcoming this remains a major challenge. We have developed a robust scalable continuous flow method for fabricating GO directly from graphite in 30% aqueous hydrogen peroxide which dramatically minimises the generation of waste. The process features the continuous flow thin film microfluidic vortex fluidic device (VFD), operating at specific conditions while irradiated sequentially by UV LED than a NIR pulsed laser. The resulting 'green' graphene oxide (gGO) has unique properties, possessing highly oxidized edges with large intact sp2 domains which gives rise to exceptional electrical and optical properties, including purple to deep blue emission of narrow full width at half maximum (<35 nm). Colloidally stable gGO exhibits cytotoxicity owing to the oxidised surface groups while solid-state films of gGO are biocompatible. The continuous flow method of generating gGO also provides unprecedented control of the level of oxidation and its location in the exfoliated graphene sheets by harnessing the high shear topological fluid flows in the liquid, and varying the wavelength, power and pulse frequency of the light source.
Project description:The catalytic decomposition of H2O2 by deuteroferrihaem, mesoferrihaem, coproferrihaem and haematoferrihaem was studied as a model for the mechanism of action of catalase. For haematoferrihaem, anomalous but reproducible results were obtained, which could not be adequately explained. For each of the other ferrihaems studied, both monomeric and dimeric species catalysed decomposition, although the activity of monomer (aM) was much greater than that of dimer (aD). The pH variation of aD in the range 6.5--11 was consistent with an inverse dependence on [H+]1/2. The molecular mechanism whereby such a dependence could be achieved is not apparent. A study of the pH-dependence of aM in the range 6.5--11 revealed a linear inverse relationship with [H+]. This is interpreted in terms of attack by HO2- on ferrihaem monomer. The specific pH-independent rate constants for this reaction were in the order coproferrihaem greater than protoferrihaem greater than or equal to mesoferrihaem congruent to deuteroferrihaem. The order of magnitude of these rate constants is the same as that for catalysis by Fe(H2O)63+ and the second-order rate constant for decomposition of H2O2 by catalase. The implications on the mechanism of action of catalase are discussed.
Project description:BackgroundOxidative stress can severely compromise viability of bifidobacteria. Exposure of Bifidobacterium cells to oxygen causes accumulation of reactive oxygen species, mainly hydrogen peroxide, leading to cell death. In this study, we tested the suitability of continuous culture under increasing selective pressure combined with immobilized cell technology for the selection of hydrogen peroxide adapted Bifidobacterium cells. Cells of B. longum NCC2705 were immobilized in gellan-xanthan gum gel beads and used to continuously ferment MRS medium containing increasing concentration of H2O2 from 0 to 130 ppm.ResultsAt the beginning of the culture, high cell density of 10(13) CFU per litre of reactor was tested. The continuous culture gradually adapted to increasing H2O2 concentrations. However, after increasing the H2O2 concentration to 130 ppm the OD of the culture decreased to 0. Full wash out was prevented by the immobilization of the cells in gel matrix. Hence after stopping the stress, it was possible to re-grow the cells that survived the highest lethal dose of H2O2 and to select two adapted colonies (HPR1 and HPR2) after plating of the culture effluent. In contrast to HPR1, HPR2 showed stable characteristics over at least 70 generations and exhibited also higher tolerance to O2 than non adapted wild type cells. Preliminary characterization of HPR2 was carried out by global genome expression profile analysis. Two genes coding for a protein with unknown function and possessing trans-membrane domains and an ABC-type transporter protein were overexpressed in HPR2 cells compared to wild type cells.ConclusionsOur study showed that continuous culture with cell immobilization is a valid approach for selecting cells adapted to hydrogen peroxide. Elucidation of H2O2 adaptation mechanisms in HPR2 could be helpful to develop oxygen resistant bifidobacteria.
Project description:The synthesis of N-acetylneuraminic acid (Neu5Ac) derivatives is drawing more and more attention in glycobiology research because of the important role of sialic acids in e. g. cancer, bacterial, and healthy cells. Chemical preparation of these carbohydrates typically relies on multistep synthetic procedures leading to low overall yields. Herein we report a continuous flow process involving N-acetylneuraminate lyase (NAL) immobilized on Immobead 150P (Immobead-NAL) to prepare Neu5Ac derivatives. Batch experiments with Immobead-NAL showed equal activity as the native enzyme. Moreover, by using a fivefold excess of either N-acetyl-D-mannosamine (ManNAc) or pyruvate the conversion and isolated yield of Neu5Ac were significantly improved. To further increase the efficiency of the process, a flow setup was designed providing a chemoenzymatic entry into a series of N-functionalized Neu5Ac derivatives in conversions of 48-82%, and showing excellent stability over 1 week of continuous use.
Project description:To enable the large-scale use of hydrogen fuel cells for mobility applications, convenient methods for on-board hydrogen storage and release are required. A promising approach is liquid organic hydrogen carriers (LOHCs), since these are safe, available on a large scale, and compatible with existing refueling infrastructure. Usually, LOHC dehydrogenation is carried out in batch-type reactors by transition metals and their complexes and suffers from slow H2 release kinetics and/or inability to reach high energy density by weight, owing to low conversion or the need to dilute the reaction mixture. In this study, a continuous flow reactor is used in combination with a heterogenized iridium pincer complex, which enables a tremendous increase in LOHC dehydrogenation rates. Thus, dehydrogenation of isopropanol is performed in a regime that, in terms of gravimetric energy density, hydrogen generation rate, and precious metal content, is potentially compatible with applications in a fuel-cell powered car.
Project description:Environmental stimuli such as UV, pathogen attack, and gravity can induce rapid changes in hydrogen peroxide (H(2)O(2)) levels, leading to a variety of physiological responses in plants. Catalase, which is involved in the degradation of H(2)O(2) into water and oxygen, is the major H(2)O(2)-scavenging enzyme in all aerobic organisms. A close interaction exists between intracellular H(2)O(2) and cytosolic calcium in response to biotic and abiotic stresses. Studies indicate that an increase in cytosolic calcium boosts the generation of H(2)O(2). Here we report that calmodulin (CaM), a ubiquitous calcium-binding protein, binds to and activates some plant catalases in the presence of calcium, but calcium/CaM does not have any effect on bacterial, fungal, bovine, or human catalase. These results document that calcium/CaM can down-regulate H(2)O(2) levels in plants by stimulating the catalytic activity of plant catalase. Furthermore, these results provide evidence indicating that calcium has dual functions in regulating H(2)O(2) homeostasis, which in turn influences redox signaling in response to environmental signals in plants.
Project description:Despite the potential of hydrogen (H2 ) storage in liquid organic carriers to achieve carbon neutrality, the energy required for H2 release and the cost of catalyst recycling have hindered its large-scale adoption. In response, a photo flow reactor packed with rhodium (Rh)/titania (TiO2 ) photocatalyst was reported for the continuous and selective acceptorless dehydrogenation of 1,2,3,4-tetrahydroquinoline to H2 gas and quinoline under visible light irradiation at room temperature. The tradeoff between the reactor pressure drop and its photocatalytic surface area was resolved by selective in-situ photodeposition of Rh in the photo flow reactor post-packing on the outer surface of the TiO2 microparticles available to photon flux, thereby reducing the optimal Rh loading by 10 times compared to a batch reactor, while facilitating catalyst reuse and regeneration. An example of using quinoline as a hydrogen acceptor to lower the energy of the hydrogen production step was demonstrated via the water-gas shift reaction.
Project description:Various conversion routes of biomass and its derivative compounds into high-value products has attracted attention from researchers recently. Among these, a solar-driven photoelectrochemical (PEC) oxidation approach of biomass alcohols to aldehydes is particularly of great interest for the potential applications because the reaction is selective and simultaneously accompanied with hydrogen production. Here, we propose a simulation of selective oxidation of benzyl alcohol into benzaldehyde coupled with hydrogen production in a 2-dimensional continuous-flow PEC reactor using COMSOL Multiphysics (5.6). In order to develop and fabricate a simple yet efficient reactor for a practical use, it is crucial to investigate the effects of operating and design parameters of the reactor on the reactions. Our studies demonstrated that the main contributions to product formation were the electrolyte flow velocity and the width of electrolyte channels. The optimized design parameter exhibited good photoelectrochemical performance with uniform potential distribution within the channels which served diffusion of neutral and charged species and electrochemical reaction. The maximum conversion of benzyl alcohol in this work was 48.25% with 100% selectivity of benzaldehyde. These findings are key for the design of the continuous-flow PEC reactor that can be applied to any series of biomass conversion reactions under mild conditions.
Project description:Au nanoparticles synthesized from colloidal techniques have the capability in many applications such as catalysis and sensing. Au nanoparticles function as both catalyst and highly sensitive SERS probe can be employed for sustainable and green catalytic process. However, capping ligands that are necessary to stabilize nanoparticles during synthesis are negative for catalytic activity. In this work, a simple effective mild thermal treatment to remove capping ligands meanwhile preserving the high SERS sensitivity of Au nanoparticles is reported. We show that under the optimal treatment conditions (250 °C for 2 h), 50 nm Au nanoparticles surfaces are free from any capping molecules. The catalytic activity of treated Au nanoparticles is studied through H2O2 decomposition, which proves that the treatment is favorable for catalytic performance improvement. A reaction intermediate during H2O2 decomposition is observed and identified.