Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Printed 5-V organic operational amplifiers for various signal processing.

ABSTRACT: The important concept of printable functional materials is about to cause a paradigm shift that we will be able to fabricate electronic devices by printing methods in air at room temperature. One of the promising applications of the printed electronics is a disposable electronic patch sensing system which can monitor the health conditions without any restraint. Operational amplifiers (OPAs) are an essential component for such sensing system, since an OPA enables a wide variety of signal processing. Here we demonstrate printed OPAs based on complementary organic semiconductor technology. They can be operated with a standard safe power source of 5 V with a minimal power consumption of 150 nW, and used as amplifiers, a variety of mathematical operators, signal converters, and oscillators. The printed micropower organic OPAs with the low voltage operation and the high versatility will open up the disposable electronic patch sensing system in near future.

SUBMITTER: Matsui H

PROVIDER: S-EPMC5997680 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Printed 5-V organic operational amplifiers for various signal processing.

Matsui Hiroyuki H Hayasaka Kazuma K Takeda Yasunori Y Shiwaku Rei R Kwon Jimin J Tokito Shizuo S

Scientific reports 20180612 1

The important concept of printable functional materials is about to cause a paradigm shift that we will be able to fabricate electronic devices by printing methods in air at room temperature. One of the promising applications of the printed electronics is a disposable electronic patch sensing system which can monitor the health conditions without any restraint. Operational amplifiers (OPAs) are an essential component for such sensing system, since an OPA enables a wide variety of signal processi ...[more]

PMID: 29895859

Similar Datasets

Organic electrochemical transistors as on-site signal amplifiers for electrochemical aptamer-based sensing.

Project description:Electrochemical aptamer-based sensors are typically deployed as individual, passive, surface-functionalized electrodes, but they exhibit limited sensitivity especially when the area of the electrode is reduced for miniaturization purposes. We demonstrate that organic electrochemical transistors (electrolyte gated transistors with volumetric gating) can serve as on-site amplifiers to improve the sensitivity of electrochemical aptamer-based sensors. By monolithically integrating an Au working/sensing electrode, on-chip Ag/AgCl reference electrode, and Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) counter electrode - also serving as the channel of an organic electrochemical transistor- we can simultaneously perform testing of organic electrochemical transistors and traditional electroanalytical measurement on electrochemical aptamer-based sensors including cyclic voltammetry and square-wave voltammetry. This device can directly amplify the current from the electrochemical aptamer-based sensor via the in-plane current modulation in the counter electrode/transistor channel. The integrated sensor can sense transforming growth factor beta 1 with 3 to 4 orders of magnitude enhancement in sensitivity compared to that in an electrochemical aptamer-based sensor (292 μA/dec vs. 85 nA/dec). This approach is believed to be universal, and can be applied to a wide range of tethered electrochemical reporter-based sensors to enhance sensitivity, aiding in sensor miniaturization and easing the burden on backend signal processing.

| S-EPMC10039935 | biostudies-literature

Aqueous Processing for Printed Organic Electronics: Conjugated Polymers with Multistage Cleavable Side Chains.

Project description:The ability to process conjugated polymers via aqueous solution is highly advantageous for reducing the costs and environmental hazards of large scale roll-to-roll processing of organic electronics. However, maintaining competitive electronic properties while achieving aqueous solubility is difficult for several reasons: (1) Materials with polar functional groups that provide aqueous solubility can be difficult to purify and characterize, (2) many traditional coupling and polymerization reactions cannot be performed in aqueous solution, and (3) ionic groups, though useful for obtaining aqueous solubility, can lead to a loss of solid-state order, as well as a screening of any applied bias. As an alternative, we report a multistage cleavable side chain method that combines desirable aqueous processing attributes without sacrificing semiconducting capabilities. Through the attachment of cleavable side chains, conjugated polymers have for the first time been synthesized, characterized, and purified in organic solvents, converted to a water-soluble form for aqueous processing, and brought through a final treatment to cleave the polymer side chains and leave behind the desired electronic material as a solvent-resistant film. Specifically, we demonstrate an organic soluble polythiophene that is converted to an aqueous soluble polyelectrolyte via hydrolysis. After blade coating from an aqueous solution, UV irradiation is used to cleave the polymer's side chains, resulting in a solvent-resistant, electroactive polymer thin film. In application, this process results in aqueous printed materials with utility for solid-state charge transport in organic field effect transistors (OFETs), along with red to colorless electrochromism in ionic media for color changing displays, demonstrating its potential as a universal method for aqueous printing in organic electronics.

| S-EPMC5620976 | biostudies-literature

Screen-Printed Piezoelectric Sensors on Tattoo Paper Combined with All-Printed High-Performance Organic Electrochemical Transistors for Electrophysiological Signal Monitoring.

Project description:This work demonstrates sensitive and low-cost piezoelectric sensors on skin-friendly, ultrathin, and conformable substrates combined with organic electrochemical transistors (OECTs) for the detection and amplification of alternating low-voltage input signals. The fully screen-printed (SP) piezoelectric sensors were manufactured on commercially available tattoo paper substrates, while the all-printed OECTs, relying on an extended gate electrode architecture, were manufactured either by solely using SP or by combining SP and aerosol jet printing (AJP) on PET substrates. Applying a low-voltage signal (±25 mV) to the gate electrode of the SP+AJP OECT results in approximately five times higher current modulation as compared to the fully SP reference OECT. The tattoo paper-based substrate enables transfer of the SP piezoelectric sensor to the skin, which in turn allows for radial pulse monitoring when combined with the SP+AJP OECT; this is possible due to the ability of the conformable sensor to convert mechanical vibrations into voltage signals along with the highly sensitive current modulation ability of the transistor device to further amplify the output signal. The results reported herein pave the way toward all-printed fully conformable wearable devices with high sensitivity to be further utilized for the real-time monitoring of electrophysiological signals.

| S-EPMC11565470 | biostudies-literature

Spindle pole bodies function as signal amplifiers in the Mitotic Exit Network.

Project description:The Mitotic Exit Network (MEN), a budding yeast Ras-like signal transduction cascade, translates nuclear position into a signal to exit from mitosis. Here we describe how scaffolding the MEN onto spindle pole bodies (SPB-centrosome equivalent) allows the MEN to couple the final stages of mitosis to spindle position. Through the quantitative analysis of the localization of MEN components, we determined the relative importance of MEN signaling from the SPB that is delivered into the daughter cell (dSPB) during anaphase and the SPB that remains in the mother cell. Movement of half of the nucleus into the bud during anaphase causes the active form of the MEN GTPase Tem1 to accumulate at the dSPB. In response to Tem1's activity at the dSPB, the MEN kinase cascade, which functions downstream of Tem1, accumulates at both SPBs. This localization to both SPBs serves an important role in promoting efficient exit from mitosis. Cells that harbor only one SPB delay exit from mitosis. We propose that MEN signaling is initiated by Tem1 at the dSPB and that association of the downstream MEN kinases with both SPBs serves to amplify MEN signaling, enabling the timely exit from mitosis.

| S-EPMC7185974 | biostudies-literature

Inkjet-Printed Organic Transistors Based on Organic Semiconductor/Insulating Polymer Blends.

Project description:Recent advances in inkjet-printed organic field-effect transistors (OFETs) based on organic semiconductor/insulating polymer blends are reviewed in this article. Organic semiconductor/insulating polymer blends are attractive ink candidates for enhancing the jetting properties, inducing uniform film morphologies, and/or controlling crystallization behaviors of organic semiconductors. Representative studies using soluble acene/insulating polymer blends as an inkjet-printed active layer in OFETs are introduced with special attention paid to the phase separation characteristics of such blended films. In addition, inkjet-printed semiconducting/insulating polymer blends for fabricating high performance printed OFETs are reviewed.

| S-EPMC5509261 | biostudies-other

Microneedles Integrated with Pancreatic Cells and Synthetic Glucose-Signal Amplifiers for Smart Insulin Delivery.

Project description:An innovative microneedle (MN)-based cell therapy is developed for glucose-responsive regulation of the insulin secretion from exogenous pancreatic β-cells without implantation. One MN patch can quickly reduce the blood-sugar levels (BGLs) of chemically induced type-1 diabetic mice and stabilize BGLs at a reduced level for over 10 h.

| S-EPMC4998837 | biostudies-literature

Topological analog signal processing.

Project description:Analog signal processors have attracted a tremendous amount of attention recently, as they potentially offer much faster operation and lower power consumption than their digital versions. Yet, they are not preferable for large scale applications due to the considerable observational errors caused by their excessive sensitivity to environmental and structural variations. Here, we demonstrate both theoretically and experimentally the unique relevance of topological insulators for alleviating the unreliability of analog signal processors. In particular, we achieve an important signal processing task, namely resolution of linear differential equations, in an analog system that is protected by topology against large levels of disorder and geometrical perturbations. We believe that our strategy opens up large perspectives for a new generation of robust all-optical analog signal processors, which can now not only perform ultrafast, high-throughput, and power efficient signal processing tasks, but also compete with their digital counterparts in terms of reliability and flexibility.

| S-EPMC6499819 | biostudies-literature

Signal processing in cellular clocks.

Project description:Many biochemical events within a cell need to be timed properly to occur at specific times of day, after other events have happened within the cell or in response to environmental signals. The cellular biochemical feedback loops that time these events have already received much recent attention in the experimental and modeling communities. Here, we show how ideas from signal processing can be applied to understand the function of these clocks. Consider two signals from the network s(t) and r(t), either two variables of a model or two experimentally measured time courses. We show how s(t) can be decomposed into two parts, the first being a function of r(t), and the second the derivative of a function of r(t). Geometric principles are then derived that can be used to understand when oscillations appear in biochemical feedback loops, the period of these oscillations, and their time course. Specific examples of this theory are provided that show how certain networks are prone or not prone to oscillate, how individual biochemical processes affect the period, and how oscillations in one chemical species can be deduced from oscillations in other parts of the network.

| S-EPMC3060235 | biostudies-literature

Predicting Operational Stability for Organic Light-Emitting Diodes with Exciplex Cohosts.

Project description:Organic light-emitting diodes (OLEDs) employing exciplex cohosts have gained attractive interest due to the promising high efficiency, low driving voltage, and potential low cost in future solid-state lighting sources and full-color displays. However, their device lifetime is still the most challenging weakness and rarely studied, which is regarded as a time consuming and complicated work. Therefore, a simplified but effective and comprehensive approach is demonstrated to give prediction for the exciplex cohosts operating lifespan and analyze their possible degradation mechanisms by considering molecular dissociated activation energy with internal exciton dynamics correlations. As a consequence, strong chemical bond stability for the hole transport moieties and rapid reactive exciton relaxation have the intrinsic talent to access potentially long-lived exciplex cohosts, achieving an extended lifetime of 10169 h for the predicted long-lived exciplex cohost OLEDs. Degradation behaviors further confirm that the deteriorated source is attributed to the formation of exciton quenchers and hole traps from excited states and charged-excited states, respectively. The current findings establish a universal technique to screen the stable exciplex cohost candidates with economic time consumption and expenses.

| S-EPMC6446740 | biostudies-literature

3D-printed flexible organic light-emitting diode displays.

Project description:The ability to fully 3D-print active electronic and optoelectronic devices will enable unique device form factors via strategies untethered from conventional microfabrication facilities. Currently, the performance of 3D-printed optoelectronics can suffer from nonuniformities in the solution-deposited active layers and unstable polymer-metal junctions. Here, we demonstrate a multimodal printing methodology that results in fully 3D-printed flexible organic light-emitting diode displays. The electrodes, interconnects, insulation, and encapsulation are all extrusion-printed, while the active layers are spray-printed. Spray printing leads to improved layer uniformity via suppression of directional mass transport in the printed droplets. By exploiting the viscoelastic oxide surface of the printed cathode droplets, a mechanical reconfiguration process is achieved to increase the contact area of the polymer-metal junctions. The uniform cathode array is intimately interfaced with the top interconnects. This hybrid approach creates a fully 3D-printed flexible 8 × 8 display with all pixels turning on successfully.

| S-EPMC8741182 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data