Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Construct CoSe2 on Carbon Nanosheets as High Sensitivity Catalysts for Electro-Catalytic Oxidation of Glucose.

ABSTRACT: Seeking an efficient, sensitive, and stable catalyst is crucial for no-enzyme glucose sen-sors to detect glucose content accurately. Herein, we constructed a catalyst of selenide cobalt (CoSe2) on carbon nanomaterials by auxiliary pyrolysis of sodium chloride. The CoSe2 on carbon nanosheets possesses good selectivity and a wide linear range up to 5 mM. Based on its good detection per-formance, the CoSe2 nanomaterial is expected to be an emerging catalyst for no-enzyme sensors.

SUBMITTER: Wang D

PROVIDER: S-EPMC8838914 | biostudies-literature | 2022 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

The Construct CoSe2 on Carbon Nanosheets as High Sensitivity Catalysts for Electro-Catalytic Oxidation of Glucose.

Wang Di D Chang Ying Y

Nanomaterials (Basel, Switzerland) 20220207 3

Seeking an efficient, sensitive, and stable catalyst is crucial for no-enzyme glucose sen-sors to detect glucose content accurately. Herein, we constructed a catalyst of selenide cobalt (CoSe2) on carbon nanomaterials by auxiliary pyrolysis of sodium chloride. The CoSe2 on carbon nanosheets possesses good selectivity and a wide linear range up to 5 mM. Based on its good detection per-formance, the CoSe2 nanomaterial is expected to be an emerging catalyst for no-e ...[more]

PMID: 35159917

Similar Datasets

Catalytic Oxidation of Glycerol over Pt Supported on MOF-Derived Carbon Nanosheets.

Project description:A series of nitrogen-doped porous carbon nanosheets (NPCNs) doped with transition-metal-supported Pt catalysts were prepared by colloidal deposition and evaluated for the selective oxidation of glycerol to glyceric acid (GLYA) under nonalkaline conditions. The transition metal contained in the catalyst was found to affect its performance and selectivity for GLYA, with the Pt/Zr@NPCN catalyst showing the highest catalytic activity and selectivity. These materials were characterized using Brunauer-Emmett-Teller surface area analysis, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and CO2 temperature-programmed desorption. The results showed that the small size of the Pt nanoparticles, the interaction between the Pt nanoparticles and the support, and the unique textural properties of the catalyst all promoted glycerol conversion and GLYA selectivity. A Zr concentration of 1.5 wt % and a support preparation temperature of 800 °C were found to provide a catalyst with the optimal performance that exhibited a glycerol conversion and selectivity for GLYA of 68.62 and 77.29%, respectively, at an initial O2 pressure of 10 bar and 60 °C after 6 h. Even after being recycled five times, this material provided a GLYA selectivity of approximately 75%, although the glycerol conversion decreased from 68 to 50%. The insights may provide new suggestions on the design of efficient support for the selective oxidation of polyols.

| S-EPMC9773361 | biostudies-literature

Effect of Sn Doping on Pd Electro-Catalysts for Enhanced Electro-Catalytic Activity towards Methanol and Ethanol Electro-Oxidation in Direct Alcohol Fuel Cells.

Project description:Carbon nano-onions (CNOs) were successfully synthesized by employing the flame pyrolysis (FP) method, using flaxseed oil as a carbon source. The alcohol reduction method was used to prepare Pd/CNOs and Pd-Sn/CNOs electro-catalysts, with ethylene glycol as the solvent and reduction agent. The metal-nanoparticles were supported on the CNO surface without adjusting the pH of the solution. High-resolution transmission electron microscopy (HRTEM) images reveal CNOs with concentric graphite ring morphology, and also PdSn nanoparticles supported on the CNOs. X-ray diffractometry (XRD) patterns confirm that CNOs are amorphous and show the characteristic diffraction peaks of Pd. There is a shifting of Pd diffraction peaks to lower angles upon the addition of Sn compared to Pd/CNOs. X-ray photoelectron spectroscopy (XPS) results also confirm the doping of Pd with Sn to form a PdSn alloy. Fourier transform infrared spectroscopy (FTIR) displays oxygen, hydroxyl, carboxyl, and carbonyl, which facilitates the dispersion of Pd and Sn nanoparticles. Raman spectrum displays two prominent peaks of carbonaceous materials which correspond to the D and G bands. The Pd-Sn/CNOs electro-catalyst demonstrates improved electro-oxidation of methanol and ethanol performance compared to Pd/CNOs and commercial Pd/C electro-catalysts under alkaline conditions.

| S-EPMC8537662 | biostudies-literature

Spinach-Derived Porous Carbon Nanosheets as High-Performance Catalysts for Oxygen Reduction Reaction.

Project description:Biomass-derived porous carbon materials are effective electrocatalysts for oxygen reduction reaction (ORR), with promising applications in low-temperature fuel cells and metal-air batteries. Herein, we developed a synthesis procedure that used spinach as a source of carbon, iron, and nitrogen for preparing porous carbon nanosheets and studied their ORR catalytic performance. These carbon sheets showed a very high ORR activity with a half-wave potential of +0.88 V in 0.1 M KOH, which is 20 mV more positive than that of commercial Pt/C catalysts. In addition, they showed a much better long-term stability than Pt/C and were insensitive to methanol. The remarkable ORR performance was attributed to the accessible high-density active sites that are primarily from Fe-N x moieties. This work paves the way toward the use of metal-enriching plants as a source for preparing porous carbon materials for electrochemical energy conversion and storage applications.

| S-EPMC7528166 | biostudies-literature

Electro-oxidation of amino-functionalized multiwalled carbon nanotubes.

Project description:We report the electrochemistry of amino-functionalized multiwalled carbon nanotubes (MWCNTs-NH2) in the pH range from 0.3 to 6.4 using quantitative cyclic voltammetry (CV) and single entity electrochemistry measurements, making comparison with non-functionalized MWCNTs. CV showed the latter to both catalyze the solvent (water) decomposition and to undergo irreversible electro-oxidation forming oxygen containing surface functionality. The MWCNTs-NH2 additionally undergo an irreversible oxidation to an extent which is dependent on the pH of the solution, reflecting the variable amount of deprotonated amino groups present as a function of pH. Nano-impact experiments conducted at the single particle level confirmed the oxidation of both types of MWCNTs, showing agreement with the CV. The pK a of the amino groups in MWCNTs was determined via both electrochemical methods giving consistent values of ca. 2.5.

| S-EPMC8809411 | biostudies-literature

Facilitation of NADH electro-oxidation at treated carbon nanotubes.

Project description:The relationship between the state of the surface of carbon nanotubes (CNTs) and their electrochemical activity was investigated using the enzyme cofactor dihydronicotinamide adenine dinucleotide (NADH) as a redox probe. The boiling of CNTs in water, while nondestructive, activated them toward the oxidation of NADH, as indicated by a shift in the anodic peak potential of NADH (E(NADH)) from 0.4 V to 0.0 V. The shift in E(NADH) was due to the redox mediation of NADH oxidation by traces of quinone species that were formed on the surface of treated CNTs. The harsher treatment that was comprised of microwaving CNTs in concentrated nitric acid had a similar effect on the E(NADH), and, additionally, it increased the anodic peak current of NADH. The latter correlated with the formation of defects on the surface of acid-microwaved CNTs, as indicated by their Raman spectra. The increase in current was discussed, considering the role of surface mediators on the buckled graphene sheets of acid-microwaved CNTs. The other carbon allotropes, including the edge-plane pyrolytic graphite, graphite powder, and glassy carbon, did not display a comparable activation toward the oxidation of NADH.

| S-EPMC2821450 | biostudies-literature

Efficient Dual-Site Carbon Monoxide Electro-Catalysts via Interfacial Nano-Engineering.

Project description:Durable, highly efficient, and economic sound electrocatalysts for CO electrooxidation (COE) are the emerging key for wide variety of energy solutions, especially fuel cells and rechargeable metal-air batteries. Herein, we report the novel system of nickel-aluminum double layered hydroxide (NiAl-LDH) nanoplates on carbon nanotubes (CNTs) network. The formulation of such complexes system was to be induced through the assistance of gold nanoparticles in order to form dual-metal active sites so as to create a extended Au/NiO two phase zone. Bis (trifluoromethylsulfonyl)imide (NTf2) anion of ionic liquid electrolyte was selected to enhance the CO/O2 adsorption and to facilitate electro-catalyzed oxidation of Ni (OH)2 to NiOOH by increasing the electrophilicity of catalytic interface. The resulting neutral catalytic system exhibited ultra-high electrocatalytic activity and stability for CO electrooxidation than commercial and other reported precious metal catalysts. The turnover frequency (TOF) of the LDH-Au/CNTs COE catalyst was much higher than the previous reported other similar electrocatalysts, even close to the activity of solid-gas chemical catalysts at high temperature. Moreover, in the long-term durability testing, the negligible variation of current density remains exsisting after 1000 electrochemistry cycles.

| S-EPMC5030650 | biostudies-literature

High turnover in electro-oxidation of alcohols and ethers with a glassy carbon-supported phenanthroimidazole mediator.

Project description:Glassy carbon electrodes covalently modified with a phenanthroimidazole mediator promote electrochemical alcohol and ether oxidation: three orders of magnitude increase in TON, to ∼15 000 in each case, was observed compared with homogeneous mediated reactions. We propose the deactivation pathways in homogeneous solution are prevented by the immobilization: modified electrode reversibility is increased for a one-electron oxidation reaction. The modified electrodes were used to catalytically oxidize p-anisyl alcohol and 1-((benzyloxy)methyl)-4-methoxybenzene, selectively, to the corresponding benzaldehyde and benzyl ester, respectively.

| S-EPMC5628575 | biostudies-literature

Large scale uniform Ni-P plated carbon fiber for boosting urea electro-oxidation and electro-detection.

Project description:Seeking an excellent electrocatalyst is the trickiest issue for the application of urea electro-oxidation and electro-detection. Phosphorus-doped nickel plating on carbon fibers (Ni-P/CF) is synthesized by simple electroless plating. SEM results exhibit that the Ni-P densely and uniformly grows onto the surface of carbon fibers (CF), forming carbon fibers-like nanoarchitectures. Benefiting from the carbon fibers-like nano architectures with abundant exposed active sites on the surface of CF, electron transfer can be synchronously facilitated, and Ni-P/CF displays superior urea electrooxidation (UOR) performance with potentials of 1.40 V to reach 100 mA cm-2. Impressively, it can maintain at 20 mA cm-2 for 48 h without evident activity attenuation, demonstrating robust durability. Cycle stability shows that the voltage has only increased by 10 mV at 300 mA cm-2 from the 10th to 20000th cycles. Most importantly, Ni-P/CF at a length of 100 cm with good reproducibility was successfully synthesized, denoting great potential for large-scale industrial production. Therefore, this work not only affords cost-effective tactics for urea-rich wastewater degradation but also can achieve practical medical applications.

| S-EPMC10639144 | biostudies-literature

Regulating N Species in N-Doped Carbon Electro-Catalysts for High-Efficiency Synthesis of Hydrogen Peroxide in Simulated Seawater.

Project description:Electrochemical oxygen reduction reaction (ORR) is an attractive and alternative route for the on-site production of hydrogen peroxide (H2 O2 ). The electrochemical synthesis of H2 O2 in neutral electrolyte is in early studying stage and promising in ocean-energy application. Herein, N-doped carbon materials (N-Cx ) with different N types are prepared through the pyrolysis of zeolitic imidazolate frameworks. The N-Cx catalysts, especially N-C800 , exhibit an attracting 2e- ORR catalytic activity, corresponding to a high H2 O2 selectivity (≈95%) and preferable stability in 0.5 m NaCl solution. Additionally, the N-C800 possesses an attractive H2 O2 production amount up to 631.2 mmol g-1 h-1 and high Faraday efficiency (79.8%) in H-type cell. The remarkable 2e- ORR electrocatalytic performance of N-Cx catalysts is associated with the N species and N content in the materials. Density functional theory calculations suggest carbon atoms adjacent to graphitic N are the main catalytic sites and exhibit a smaller activation energy, which are more responsible than those in pyridinic N and pyrrolic N doped carbon materials. Furthermore, the N-C800 catalyst demonstrates an effective antibacterial performance for marine bacteria in simulated seawater. This work provides a new insight for electro-generation of H2 O2 in neutral electrolyte and triggers a great promise in ocean-energy application.

| S-EPMC10625060 | biostudies-literature

Nickel Catalysts Supported on Acetylene Black for High-Efficient Electrochemical Oxidation and Sensitive Detection of Glucose.

Project description:Electrocatalytic glucose oxidation is a very important reaction in glucose fuel cell and medical diagnosis, which is limited by sluggish reaction kinetics and low diffusion coefficient. Herein, a composite (donated as Ni6/AB) consisting of atomically precise nickel catalyst with defined crystal structure [Ni6(SC12H25)12] and acetylene black(AB) has been initiated as a novel and high-efficient non-noble metal catalyst for the electrochemical oxidation of glucose benefiting from its high exposure of active sites and increased electron/mass transport. The present Ni6/AB composites display the onset potential of +1.24 V and the maximum current density of 5 mA cm-2 at the potential of +1.47 V in the electrolyte of 0.1 M KOH with 5 mM glucose. This electrochemical performance is much superior to the alone nickel catalysts, acetylene black, and previous reported nanomaterials. Furthermore, the obtained Ni6/AB composites are also expected to find important application in the electrochemical detection of glucose due to its high electrochemical performance. The sensitivity and the detection of limit are determined to be 0.7709 mA cm-2 mM-1 and 1.9 μM, respectively. Our study demonstrates that atomically precise nickel catalysts on acetylene black could be potential promising materials for next-generation energy devices and electrochemical sensors.

| S-EPMC6987276 | biostudies-literature