Dataset Information

Aggregation behavior of cetyldimethylethylammonium bromide under the influence of bovine serum albumin in aqueous/electrolyte solutions at various temperatures and compositions: conductivity and molecular dynamics study.

ABSTRACT: Herein, we have investigated the interaction of bovine serum albumin (BSA), the most abundant globular protein, with a conventional cationic surfactant, cetyldimethylethylammonium bromide (CDMEAB), through a conductivity technique in the absence/presence of electrolyte solutions at various temperatures (298.15-323.15 K). The interaction of the protein with drugs/surfactants and other additives plays a crucial role in the body. Hence, the main concern of the study is to extract the impact of BSA on surfactant molecules and vice versa. From the specific conductivity versus concentration of surfactant plots, three different noticeable critical micelle concentration (c*) values were obtained for pure CDMEAB and its mixture with protein/protein + salts. The presence of BSA and electrolytes altered the c* values of CDMEAB revealing interactions among the studied constituents where the salt solutions reduced the c* values and created a convenient environment for favorable micellization. The negative magnitudes achieved for standard free energy changes (ΔG ⁰ _m) suggest spontaneity of micellization while the values of ΔH ⁰ _m and ΔS ⁰ _m signified the existence of some electrostatic and hydrophobic interactions. The values of molar heat capacity (ΔC ⁰ _m) were positive as well as small which was an indication of less structural deformation. Molecular Dynamics (MD) simulation for all atoms revealed that the salt ions promoted non-covalent interaction between BSA and CDMEAB, and such interactions were not observed in the absence of the salt. Protein structure remained nearly same in spite of strong interaction with CDMEAB as evident from the overall RMSD (root-mean-square deviation) values of the alpha carbons and backbone of the protein and RMSF (root-mean-square fluctuation) values of the amino acid residues present in BSA. In this work thermodynamic parameters of transfer (such as ΔG ⁰ _m.tr., ΔH ⁰ _m.tr., and ΔC ⁰ _p.m.tr.) were also evaluated and the results are discussed in detail. Besides, contributions of enthalpy and entropy to free energy changes were also analyzed.

SUBMITTER: Ahmed MF

PROVIDER: S-EPMC9060940 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Aggregation behavior of cetyldimethylethylammonium bromide under the influence of bovine serum albumin in aqueous/electrolyte solutions at various temperatures and compositions: conductivity and molecular dynamics study.

Ahmed Md Farid MF Molla Mohammad Robel MR Saha Mousumi M Shahriar Imrul I Rahman Mohammad Saidur MS Halim Mohammad A MA Rub Malik Abdul MA Hoque Md Anamul MA Asiri Abdullah M AM

RSC advances 20190225 12

Herein, we have investigated the interaction of bovine serum albumin (BSA), the most abundant globular protein, with a conventional cationic surfactant, cetyldimethylethylammonium bromide (CDMEAB), through a conductivity technique in the absence/presence of electrolyte solutions at various temperatures (298.15-323.15 K). The interaction of the protein with drugs/surfactants and other additives plays a crucial role in the body. Hence, the main concern of the study is to extract the impact of BSA ...[more]

PMID: 35518479

Similar Datasets

Project description:ObjectivePreservation of biological materials at subzero Centigrade temperatures, cryopreservation, is important for the field of tissue engineering and organ transplantation. Our group is studying the use of isochoric (constant volume) systems of aqueous solution for cryopreservation. Previous studies measured the pressure-temperature relations in aqueous isochoric systems in the temperature range from 0°C to - 20°C. The goal of this study is to expand the pressure-temperature measurement beyond the range reported in previous publications.Materials and methodsTo expand the pressure-temperature measurements beyond the previous range, we have developed a new isochoric device capable of withstanding liquid nitrogen temperatures and pressures of up to 413 MPa. The device is instrumented with a pressure transducer than can monitor and record the pressures in the isochoric chamber in real time. Measurements were made in a temperature range from - 5°C to liquid nitrogen temperatures for various solutions of pure water and Me2SO (a chemical additive used for protection of biological materials in a frozen state and for vitrification (glass formation) of biological matter). Undissolved gaseous are is carefully removed from the system.ResultsTemperature-pressure data from - 5°C to liquid nitrogen temperature for pure water and other solutions are presented in this study. Following are examples of some, temperature-pressure values, that were measured in an isochoric system containing pure water: (- 20°C, 187 MPa); (-25°C, 216 MPa); (- 30°C, 242.3 MPa); (-180°C, 124 MPa). The data is consistent with the literature, which reports that the pressure and temperature at the triple point, between ice I, ice III and water is, - 21.993°C and 209.9 MPa, respectively. It was surprising to find that the pressure in the isochoric system increases at temperatures below the triple point and remains high to liquid nitrogen temperatures. Measurements of pressure-temperature relations in solutions of pure water and Me2SO in different concentrations show that, for concentrations in which vitrification is predicted, no increase in pressure was measured during rapid cooling to liquid nitrogen temperatures. However, ice formation either during cooling or warming to and from liquid nitrogen temperatures produced an increase in pressure.ConclusionsThe data obtained in this study can be used to aid in the design of isochoric cryopreservation protocols. The results suggest that the pressure measurement is important in the design of "constant volume" systems and can provide a simple means to gain information on the occurrence of vitrification and devitrification during cryopreservation processes of aqueous solutions in an isochoric system.

Project description:The electrostatic, entropic and surface interactions between a macroion (nanoparticle or biomolecule), surrounding ions and water molecules play a fundamental role in the behavior and function of colloidal systems. However, the molecular mechanisms governing these phenomena are still poorly understood. One of the major limitations in procuring this understanding is the lack of appropriate computational tools. Additionally, only experts in the field with an extensive background in programming, who are trained in statistical mechanics, and have access to supercomputers are able to study these systems. To overcome these limitations, in this article, we present a free, multiplatform, portable Java software, which provides experts and non-experts in the field an easy and efficient way to obtain an accurate molecular characterization of electrical and structural properties of aqueous electrolyte mixture solutions around both cylindrical- and spherical-like rigid macroions under multiple conditions. These properties include the normalized ions and water density profile distributions, the mean electrostatic potential, the integrated charge, the zeta potential, the electrostatic potential energy, the particle crowding entropy energy, the ion-ion electrostatic direct correlation energy, and the ionic potential of mean force. The Java software does not require outstanding skills and comes with detailed user-guide documentation. The application is based on the so-called Classical Density Functional Theory Solver (CSDFTS), which was successfully applied to a variety of rod-like biopolymers, rigid-like globular proteins, nanoparticles, and nano-rods. CSDFTS implements several electrolyte and macroion models, uses different levels of approximation and takes advantage of high performance Fortran90 routines and optimized libraries. These features enable the software to run on single processor computers at low-to-moderate computational cost depending on the computer performance, the grid resolution, and the characterization of the macroion and the electrolyte solution, among other factors. As a unique feature, the software comes with a graphical user interface (GUI) that allows users to take advantage of the visually guided setup of the required input data to properly characterize the system and configure the solver. Several examples on nanomaterials and biomolecules are provided to illustrate the use of the GUI and the solver performance.

Dataset Information

Aggregation behavior of cetyldimethylethylammonium bromide under the influence of bovine serum albumin in aqueous/electrolyte solutions at various temperatures and compositions: conductivity and molecular dynamics study.

Publications

Aggregation behavior of cetyldimethylethylammonium bromide under the influence of bovine serum albumin in aqueous/electrolyte solutions at various temperatures and compositions: conductivity and molecular dynamics study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets