Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Self-assembled single-crystal bimodal porous GaN exhibiting a petal effect: application as a sensing platform and substrate for optical devices.

ABSTRACT: This paper investigates the petal effect (hydrophobicity and strong adhesion) observed on single-crystal bimodal porous GaN (porous GaN), which has almost the same electrical properties as bulk GaN. The water contact angles of porous GaN were 100°-135° despite the intrinsic hydrophilic nature of GaN. Moreover, it was demonstrated that the petal effect of porous GaN leads to the uniform attachment of water solutions, enabling highly uniform and aggregation-free attachment of chemicals and quantum dots. These results indicate that porous GaN can be applied in quantum dot light-emitting diodes and as an analytical substrate.

SUBMITTER: Kimura T

PROVIDER: S-EPMC9470053 | biostudies-literature | 2022 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Self-assembled single-crystal bimodal porous GaN exhibiting a petal effect: application as a sensing platform and substrate for optical devices.

Kimura Taishi T Murase Masakazu M Yamada Yuri Y Mizoshita Norihiro N Nakamura Daisuke D

Nanoscale advances 20220627 18

This paper investigates the petal effect (hydrophobicity and strong adhesion) observed on single-crystal bimodal porous GaN (porous GaN), which has almost the same electrical properties as bulk GaN. The water contact angles of porous GaN were 100°-135° despite the intrinsic hydrophilic nature of GaN. Moreover, it was demonstrated that the petal effect of porous GaN leads to the uniform attachment of water solutions, enabling highly uniform and aggregation-free attachment of chemicals and quantum ...[more]

PMID: 36133321

Similar Datasets

Self-assembled porous polymer films for improved oxygen sensing.

Project description:Absolute oxygen sensors based on quenching of phosphorescence have been the subject of numerous studies for the monitoring of biological environments. Here, we used simple fabrication techniques with readily available polymers to obtain high performance phosphorescent films. Specifically, evaporation-based phase separation and the breath figure technique were used to induce porosity. The pore sizes ranged from ∼37 nm to ∼141 μm while the maximum average porosity achieved was ∼74%. The oxygen sensing properties were evaluated via a standarised calibration procedure with an optoelectronic setup in both transmission and reflection based configurations. When comparing non-porous and porous films, the highest improvements achieved were a factor of ∼7.9 in dynamic range and ∼7.3 in maximum sensitivity, followed by an improved linearity with a half-sensitivity point at 43% O2 V/V. Also, the recovery time was reduced by an order of magnitude in the high porosity film and all samples prepared were not affected by variations in the humidity of the surrounding environment. Despite the use of common polymers, the fabrication techniques employed led to the significant enhancement of oxygen sensing properties and elucidated the relation between porous film morphologies and sensing performance.

| S-EPMC10582206 | biostudies-literature

SERS-active substrate assembled by Ag NW-embedded porous polystyrene fibers.

Project description:Here we demonstrate a novel SERS-active substrate assembled by silver nanowire (Ag NW)-embedded porous polystyrene (PS) fibers. Ag NWs are synthesized through a glycerol-mediated solvothermal method firstly, then electrospun into PS porous fibers. The as-synthesized Ag NWs are embedded in PS fiber and aligned orderly along the axial direction. Porous structure appears in PS fiber due to the phase separation induced by rapid evaporation of solvents. Large amounts of holes not only greatly improve the sample collection efficiency of the SERS-active substrate, but also significantly facilitate the adsorption of target molecules on the surface of Ag NWs, thus increasing the probability of enhancement of target molecules. In addition, compared with polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP), PS has better solvent resistance. The detection limit of 4-aminothiophenol (4-ATP) on our fabricated electrospun fiber mats is 10-7 M, and the electrospun fiber mats showed good reproducibility of SERS signal detection. This study proposes a feasible strategy for the large-scale preparation of flexible SERS-active substrate assembled by Ag NW-embedded porous PS fibers. The produced flexible SERS substrates may have potential application in wearable sensors for the trace detection of chemical and biological molecules.

| S-EPMC9054506 | biostudies-literature

Porous flower-like superstructures based on self-assembled colloidal quantum dots for sensing.

Project description:Quantum dots (QDs) have been envisaged as very promising materials for the development of advanced optical sensors. Here we report a new highly porous luminescent material based on colloidal QDs for potential applications in optical sensing devices. Bulk flower-like porous structures with sizes of hundreds of microns have been produced by slow destabilization of QD solution in the presence of a non-solvent vapor. The porous highly luminescent material was formed from CdSe QDs using the approach of non-solvent destabilization. This material demonstrated a 4-fold decrease in PL signal in the presence of the ammonia vapor. The relationship between the destabilization rate of QDs in solution and the resulting morphology of structural elements has been established. The proposed model of bulk porous flower-like nanostructured material fabrication can be applied to nanoparticles of different nature combining their unique properties. This research opens up a new approach to design novel multi-component composite materials enabling potential performance improvements of various photonic devices.

| S-EPMC6346065 | biostudies-literature

Porous Carbon Substrate Improving the Sensing Performance of Copper Nanoparticles Toward Glucose.

Project description:An accurate sensor to rapidly determine the glucose concentration is of significant importance for the human body health, as diabetes has become a very high incidence around the world. In this work, copper nanoparticles accommodated in porous carbon substrates (Cu NP@PC), synthesized by calcinating the filter papers impregnated with copper ions at high temperature, were designed as the electrode active materials for electrochemical sensing of glucose. During the formation of porous carbon, the copper nanoparticles spontaneously accommodated into the formed voids and constituted the half-covered composites. For the electrochemical glucose oxidation, the prepared Cu NP@PC composites exhibit much superior catalytic activity with the current density of 0.31 mA/cm2 at the potential of 0.55 V in the presence of 0.2 mM glucose. Based on the high electrochemical oxidation activity, the present Cu NP@PC composites also exhibit a superior glucose sensing performance. The sensitivity is determined to be 84.5 μA /(mmol.L) with a linear range of 0.01 ~ 1.1 mM and a low detection limit (LOD) of 2.1 μmol/L. Compared to that of non-porous carbon supported copper nanoparticles (Cu NP/C), this can be reasonable by the improved mass transfer and strengthened synergistic effect between copper nanoparticles and porous carbon substrates.

| S-EPMC8346618 | biostudies-literature

Enhanced excitonic emission efficiency in porous GaN.

Project description:We investigate the optical properties of porous GaN films of different porosities, focusing on the behaviors of the excitonic features in time-integrated and time-resolved photoluminescence. A substantial enhancement of both excitonic emission intensity and recombination rate, along with insignificant intensity weakening under temperature rise, is observed in the porous GaN films. These observations are in line with (i) the local concentration of electric field at GaN nanoparticles and pores due to the depolarization effect, (ii) the efficient light extraction from the nanoparticles. Besides, the porosification enlarges the surface of the air/semiconductor interface, which further promotes the extraction efficiency and suppresses non-radiative recombination channels. Our findings open a way to increasing the emission efficiency of nanophotonic devices based on porous GaN.

| S-EPMC6202416 | biostudies-literature

Defect-selective-etched porous GaN as a buffer layer for high efficiency InGaN/GaN light-emitting diodes.

Project description:Substrate-induced biaxial compressive stress and threading dislocations (TDs) have been recognized to severely impair the performance, stability, and reliability of InGaN/GaN light-emitting diodes (LEDs) for quite some time. In this study, a defect-selective-etched (DSE) porous GaN layer is fabricated employing electro-chemical etching and applied as a buffer layer for the development of InGaN/GaN LEDs with high quantum efficiency. Based on the analysis of photoluminescence and micro-Raman spectra, it has been revealed that the overgrown GaN epilayer on the DSE porous GaN has a relatively low TDs and relaxation of compressive stress in comparison to the conventional GaN epilayer. The remarkable improvement in the internal quantum efficiency of the InGaN/GaN LEDs is directly attributable to the strong radiative recombination in InGaN/GaN multi-quantum-wells caused by stress relaxation and TDs annihilation. Our findings indicate that the use of DSE porous GaN as a buffer layer may be a viable approach for producing crystalline GaN epilayers and high-performance LEDs.

| S-EPMC9671350 | biostudies-literature

A high thermal stability ohmic contact for GaN-based devices.

Project description:Co-integration of gallium nitride (GaN) power devices with Si logic ICs provides a way of applying high power and high efficiency circuits on a single chip. In order to co-integrate GaN devices with Si ICs, an ohmic contact for GaN devices has to be Si compatible and durable at the same or higher temperature of the back-end process in the conventional complementary metal oxide semiconductor (CMOS) industry. In this work, an Au-free ohmic junction with high thermal stability for AlGaN/GaN high electron mobility transistors (HEMTs) was presented. The proposed titanium nitride (TiN) contacts on AlGaN/GaN HEMTs retained their ohmic characteristics and stayed stable at temperatures even higher than 1000 °C. The interface chemistry analysis using STEM EELS revealed the enhancement of the binding energy of Ga-N and Al-N and invisible diffusion of Ti during treatment below 1000 °C. This clarifies the origin of the highly stable ohmic contact. Thus, our work provides a new pathway and thought for forming reliable contacts for HEMTs or another GaN-based devices.

| S-EPMC10521205 | biostudies-literature

Biomimetic hair-assisted GaN optical devices for bidirectional airflow detection.

Project description:Airflow sensing plays a pivotal role in numerous fields, including medicine, industry, and environmental monitoring. However, detecting bidirectional airflow using a single sensing unit poses significant challenges. In this work, a miniature airflow sensing device is introduced, utilizing a GaN optical chip integrated with a biomimetic hair structure. The sensing device comprises a monolithic GaN chip that handles both light emission and detection. The biomimetic hairs, constructed from nylon fibers and PDMS film, undergo structural bending in converting airflow signals into optical changes, modulating the light captured by the on-chip detector. The intensity of the airflow directly correlates with the bending extent of the biomimetic hair, facilitating the precise detection of airflow rates through changes in the photocurrent. The integrated device can measure a wide range of airflow rates from -23.87 ms-1 to 21.29 ms-1, and exhibit a rapid response time of 13 ms and a detection limit of 0.1 ms-1. Characterized by its compact size, fast response time, and bidirectional detection ability, the developed device holds immense potential for applications in breath detection, speech recognition, encoding information, and the realization of logic operations.

| S-EPMC11544249 | biostudies-literature

Nitrogen-containing three-dimensional biomass porous carbon materials as an efficient enzymatic biosensing platform for glucose sensing.

Project description:A novel glucose biosensor was developed by immobilizing glucose oxidase (GOD) on a three-dimensional (3D) porous cane vine (wisteria) stem-derived carbon (3D-CVS), which was firstly proposed as novel support material for electrochemical biosensors using loaded biomolecules. Here, an integrated 3D-CVS electrode was fabricated by loading GOD molecule onto a whole piece of 3D-CVS electrode for a glucose biosensor. The morphologies of integrated 3D-CVS and 3D-CVS/GOD electrode were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). SEM results show the 3D macroporous structure of the integrated 3D-CVS electrode. TEM results show that there are some micro-holes and defects in the 3D-CVS electrode. Electrochemical behaviors and electrocatalytic performance of integrated 3D-CVS/GOD electrode were evaluated by cyclic voltammetry and electrochemical impedance spectroscopy. The effects of pH and scanning rate on the electrochemical response of biosensors have been studied in detail. The glucose biosensor showed a wide linear range from 0.58 μM to 16 mM, with a high sensitivity of 86.17 μA mM-1 and a low detection limit of 0.19 μM. Furthermore, the glucose biosensor exhibited high selectivity, good repeatability and nice stability.

| S-EPMC9070086 | biostudies-literature

Bimodal sensing of guidance cues in mechanically distinct microenvironments.

Project description:Contact guidance due to extracellular matrix architecture is a key regulator of carcinoma invasion and metastasis, yet our understanding of how cells sense guidance cues is limited. Here, using a platform with variable stiffness that facilitates uniaxial or biaxial matrix cues, or competing E-cadherin adhesions, we demonstrate distinct mechanoresponsive behavior. Through disruption of traction forces, we observe a profound phenotypic shift towards a mode of dendritic protrusion and identify bimodal processes that govern guidance sensing. In contractile cells, guidance sensing is strongly dependent on formins and FAK signaling and can be perturbed by disrupting microtubule dynamics, while low traction conditions initiate fluidic-like dendritic protrusions that are dependent on Arp2/3. Concomitant disruption of these bimodal mechanisms completely abrogates the contact guidance response. Thus, guidance sensing in carcinoma cells depends on both environment architecture and mechanical properties and targeting the bimodal responses may provide a rational strategy for disrupting metastatic behavior.

| S-EPMC6244288 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data