Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Unraveling the electrocatalytic reduction mechanism of enols on copper in aqueous media

ABSTRACT: Deoxygenation of aldehydes and their tautomers to alkenes and alkanes has implications in refining biomass-derived fuels for use as transportation fuel. Electrochemical deoxygenation in ambient, aqueous solution is also a potential green synthesis strategy for terminal olefins. In this manuscript, direct electrochemical conversion of vinyl alcohol and acetaldehyde on polycrystalline Cu to ethanol, ethylene and ethane; and propenol and propionaldehyde to propanol, propene and propane is reported. Sensitive detection was achieved using a rotating disk electrode coupled with gas chromatography-mass spectrometry. In-situ attenuated total reflection surface-enhanced infrared absorption spectroscopy, and in-situ Raman spectroscopy confirmed the adsorption of the vinyl alcohol. Calculations using canonical and grand-canonical density functional theory and experimental findings suggest that the rate-determining step for ethylene and ethane formation is an electron transfer step to the adsorbed vinyl alcohol. Finally, we extend our conclusions to the enol reaction from higher-order soluble aldehyde and ketone. The products observed from the reduction reaction also sheds insights into plausible reaction pathways of CO2 to C2 and C3 products. Understanding the electrochemical deoxygenation pathway of aldehydes and ketones is important yet challenging. Here the authors use acetaldehyde as a model system to elucidate the role of enols in the electroreduction of aldehydes and ketones, which may shed light on the reaction pathway of CO2 to C2 and C3 products.

SUBMITTER: Cui Z

PROVIDER: S-EPMC9530228 | biostudies-literature | 2022 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Elucidation of the Electrocatalytic Nitrite Reduction Mechanism by Bio-Inspired Copper Complexes.

Project description:Mononuclear copper complexes relevant to the active site of copper nitrite reductases (CuNiRs) are known to be catalytically active for the reduction of nitrite. Yet, their catalytic mechanism has thus far not been resolved. Here, we provide a complete description of the electrocatalytic nitrite reduction mechanism of a bio-inspired CuNiR catalyst Cu(tmpa) (tmpa = tris(2-pyridylmethyl)amine) in aqueous solution. Through a combination of electrochemical studies, reaction kinetics, and density functional theory (DFT) computations, we show that the protonation steps take place in a stepwise manner and are decoupled from electron transfer. The rate-determining step is a general acid-catalyzed protonation of a copper-ligated nitrous acid (HNO2) species. In view of the growing urge to convert nitrogen-containing compounds, this work provides principal reaction parameters for efficient electrochemical nitrite reduction. This contributes to the investigation and development of nitrite reduction catalysts, which is crucial to restore the biogeochemical nitrogen cycle.

| S-EPMC10407843 | biostudies-literature

Dual cobalt-copper light-driven catalytic reduction of aldehydes and aromatic ketones in aqueous media.

Project description:We present an efficient, general, fast, and robust light-driven methodology based on earth-abundant elements to reduce aryl ketones, and both aryl and aliphatic aldehydes (up to 1400 TON). The catalytic system consists of a robust and well-defined aminopyridyl cobalt complex active for photocatalytic water reduction and the [Cu(bathocuproine)(Xantphos)](PF6) photoredox catalyst. The dual cobalt-copper system uses visible light as the driving-force and H2O and an electron donor (Et3N or iPr2EtN) as the hydride source. The catalytic system operates in aqueous mixtures (80-60% water) with high selectivity towards the reduction of organic substrates (>2000) vs. water reduction, and tolerates O2. High selectivity towards the hydrogenation of aryl ketones is observed in the presence of terminal olefins, aliphatic ketones, and alkynes. Remarkably, the catalytic system also shows unique selectivity for the reduction of acetophenone in the presence of aliphatic aldehydes. The catalytic system provides a simple and convenient method to obtain ?,?-deuterated alcohols. Both the observed reactivity and the DFT modelling support a common cobalt hydride intermediate. The DFT modelled energy profile for the [Co-H] nucleophilic attack to acetophenone and water rationalises the competence of [CoII-H] to reduce acetophenone in the presence of water. Mechanistic studies suggest alternative mechanisms depending on the redox potential of the substrate. These results show the potential of the water reduction catalyst [Co(OTf)(Py2Tstacn)](OTf) (1), (Py2Tstacn = 1,4-di(picolyl)-7-(p-toluenesulfonyl)-1,4,7-triazacyclononane, OTf = trifluoromethanesulfonate anion) to develop light-driven selective organic transformations and fine solar chemicals.

| S-EPMC6100254 | biostudies-literature

Efficient electrocatalytic nitrogen reduction to ammonia with aqueous silver nanodots.

Project description:The electrocatalytic nitrogen (N2) reduction reaction (NRR) relies on the development of highly efficient electrocatalysts and electrocatalysis systems. Herein, we report a non-loading electrocatalysis system, where the electrocatalysts are dispersed in aqueous solution rather than loading them on electrode substrates. The system consists of aqueous Ag nanodots (AgNDs) as the catalyst and metallic titanium (Ti) mesh as the current collector for electrocatalytic NRR. The as-synthesized AgNDs, homogeneously dispersed in 0.1 M Na2SO4 solution (pH = 10.5), can achieve an NH3 yield rate of 600.4 ± 23.0 μg h-1 mgAg-1 with a faradaic efficiency (FE) of 10.1 ± 0.7% at -0.25 V (vs. RHE). The FE can be further improved to be 20.1 ± 0.9% at the same potential by using Ti mesh modified with oxygen vacancy-rich TiO2 nanosheets as the current collector. Utilizing the aqueous AgNDs catalyst, a Ti plate based two-electrode configured flow-type electrochemical reactor was developed to achieve an NH3 yield rate of 804.5 ± 30.6 μg h-1 mgAg-1 with a FE of 8.2 ± 0.5% at a voltage of -1.8 V. The designed non-loading electrocatalysis system takes full advantage of the AgNDs' active sites for N2 adsorption and activation, following an alternative hydrogenation mechanism revealed by theoretical calculations.

| S-EPMC9814735 | biostudies-literature

Origin of copper dissolution under electrocatalytic reduction conditions involving amines.

Project description:Cu dissolution has been identified as the dominant process that causes cathode degradation and losses even under cathodic conditions involving methylamine. Despite extensive experimental research, our fundamental and theoretical understanding of the atomic-scale mechanism for Cu dissolution under electrochemical conditions, eventually coupled with surface restructuring processes, is limited. Here, driven by the observation that the working Cu electrode is corroded using mixtures of acetone and methylamine even under reductive potential conditions (-0.75 V vs. RHE), we employed Grand Canonical density functional theory to understand this dynamic process under potential from a microscopic perspective. We show that amine ligands in solution directly chemisorb on the electrode, coordinate with the metal center, and drive the rearrangement of the copper surface by extracting Cu as adatoms in low coordination positions, where other amine ligands can coordinate and stabilize a surface copper-ligand complex, finally forming a detached Cu-amine cationic complex in solution, even under negative potential conditions. Calculations predict that dissolution would occur for a potential of -1.1 V vs. RHE or above. Our work provides a fundamental understanding of Cu dissolution facilitated by surface restructuring in amine solutions under electroreduction conditions, which is required for the rational design of durable Cu-based cathodes for electrochemical amination or other amine involving reduction processes.

| S-EPMC11331451 | biostudies-literature

Mechanistic insight into electrocatalytic glyoxal reduction on copper and its relation to CO<sub>2</sub> reduction.

Project description:Copper electrodes produce several industrially relevant chemicals and fuels during the electrochemical CO2 reduction reaction (CO2RR). Knowledge about the reaction pathways can help tune the reaction selectivity toward higher-value products. To probe the uncertain role of the C2 molecule glyoxal, we electrochemically reduced it on polycrystalline Cu and quantified its liquid-phase products, namely, ethanol, ethylene glycol, and acetaldehyde. The gas phase contained hydrogen and traces of ethylene. In contrast with previous hypothesis, a one-to-one comparison with CO2RR on Cu indicates that glyoxal is neither a major intermediate in the pathway toward ethylene nor in the pathway toward ethanol. In addition, great possibilities for the selective, low-temperature production of ethylene glycol are open, as computational modelling shows that ethylene glycol and ethanol are produced on different active sites. Thus, apart from the mechanistic insight into CO2RR, this study gives new directions to facilitate the electrification of chemical processes at refineries.

| S-EPMC9516950 | biostudies-literature

Cobalt-dithiolene complexes for the photocatalytic and electrocatalytic reduction of protons in aqueous solutions.

Project description:Artificial photosynthesis (AP) is a promising method of converting solar energy into fuel (H(2)). Harnessing solar energy to generate H(2) from H(+) is a crucial process in systems for artificial photosynthesis. Widespread application of a device for AP would rely on the use of platinum-free catalysts due to the scarcity of noble metals. Here we report a series of cobalt dithiolene complexes that are exceptionally active for the catalytic reduction of protons in aqueous solvent mixtures. All catalysts perform visible-light-driven reduction of protons from water when paired with Ru(bpy)(3)(2+) as the photosensitizer and ascorbic acid as the sacrificial donor. Photocatalysts with electron withdrawing groups exhibit the highest activity with turnovers up to 9,000 with respect to catalyst. The same complexes are also active electrocatalysts in 11 acetonitrile/water. The electrocatalytic mechanism is proposed to be ECEC, where the Co dithiolene catalysts undergo rapid protonation once they are reduced to CoL(2)(2-). Subsequent reduction and reaction with H(+) lead to H(2) formation. Cobalt dithiolene complexes thus represent a new group of active catalysts for the reduction of protons.

| S-EPMC3465406 | biostudies-literature

Hydride-Free Hydrogenation: Unraveling the Mechanism of Electrocatalytic Alkyne Semihydrogenation by Nickel-Bipyridine Complexes.

Project description:Hydrogenation reactions of carbon-carbon unsaturated bonds are central in synthetic chemistry. Efficient catalysis of these reactions classically recourses to heterogeneous or homogeneous transition-metal species. Whether thermal or electrochemical, C-C multiple bond catalytic hydrogenations commonly involve metal hydrides as key intermediates. Here, we report that the electrocatalytic alkyne semihydrogenation by molecular Ni bipyridine complexes proceeds without the mediation of a hydride intermediate. Through a combined experimental and theoretical investigation, we disclose a mechanism that primarily involves a nickelacyclopropene resting state upon alkyne binding to a low-valent Ni(0) species. A following sequence of protonation and electron transfer steps via Ni(II) and Ni(I) vinyl intermediates then leads to olefin release in an overall ECEC-type pattern as the most favored pathway. Our results also evidence that pathways involving hydride intermediates are strongly disfavored, which in turn promotes high semihydrogenation selectivity by avoiding competing hydrogen evolution. While bypassing catalytically competent hydrides, this type of mechanism still retains inner-metal-sphere characteristics with the formation of organometallic intermediates, often essential to control regio- or stereoselectivity. We think that this approach to electrocatalytic reductions of unsaturated organic groups can open new paradigms for hydrogenation or hydroelementation reactions.

| S-EPMC10416305 | biostudies-literature

Electrocatalytic oxygen reduction activity of AgCoCu oxides on reduced graphene oxide in alkaline media.

Project description:Silver-based electrocatalysts as promising substitutes for platinum materials for cathodic oxygen electroreduction have been extensively researched. Electrocatalytic enhancement of the Ag nanoarchitectonics can be obtained via support structures and amalgamating Ag with one or two additional metals. The work presented here deals with a facile microwave-assisted synthesis to produce bimetallic Ag-Cu and Ag-Co (1:1) oxide nanoparticles (NPs) and trimetallic AgCuCo (0.6:1.5:1.5, 2:1:1, and 6:1:1) oxide NPs supported on a reduced graphene oxide (rGO) matrix. Morphology, composition, and functional groups were methodically analysed using various microscopic and spectroscopic techniques. The as-prepared electrocatalysts were employed as cathode substrates for the oxygen reduction reaction (ORR) in alkaline medium. Varying the Ag fraction in copper cobalt oxide has a significant influence on the ORR activity. At a ratio of 2:1:1, AgCuCo oxide NPs on rGO displayed the best values for onset potential, half-wave potential, and limiting current density (J k) of 0.94 V vs RHE, 0.78 V, and 3.6 mA·cm-2, respectively, with an electrochemical active surface area of 66.92 m2·g-1 and a mass activity of 40.55 mA·mg-1. The optimum electrocatalyst shows considerable electrochemical stability over 10,000 cycles in 0.1 M KOH solution.

| S-EPMC9531560 | biostudies-literature

Electrocatalytic CO2 Reduction and H2 Evolution by a Copper (II) Complex with Redox-Active Ligand.

Project description:The process of electrocatalytic CO2 reduction and H2 evolution from water, regarding renewable energy, has become one of the global solutions to problems related to energy consumption and environmental degradation. In order to promote the electrocatalytic reactivity, the study of the role of ligands in catalysis has attracted more and more attention. Herein, we have developed a copper (II) complex with redox-active ligand [Cu(L1)2NO3]NO3 (1, L1 = 2-(6-methoxypyridin-2-yl)-6-nitro-1h-benzo [D] imidazole). X-ray crystallography reveals that the Cu ion in cation of complex 1 is coordinated by two redox ligands L1 and one labile nitrate ligand, which could assist the metal center for catalysis. The longer Cu-O bond between the metal center and the labile nitrate ligand would break to provide an open coordination site for the binding of the substrate during the catalytic process. The electrocatalytic investigation combined with DFT calculations demonstrate that the copper (II) complex could homogeneously catalyze CO2 reduction towards CO and H2 evolution, and this could occur with great performance due to the cooperative effect between the central Cu (II) ion and the redox- active ligand L1. Further, we discovered that the added proton source H2O and TsOH·H2O (p-Toluenesulfonic acid) could greatly enhance its electrocatalytic activity for CO2 reduction and H2 evolution, respectively.

| S-EPMC8874443 | biostudies-literature

Unveiling Polymerization Mechanism in pH-regulated Supramolecular Fibers in Aqueous Media.

Project description:An amine functionalized C3 -symmetric benzotrithiophene (BTT) monomer has been designed and synthetized in order to form pH responsive one-dimensional supramolecular polymers in aqueous media. While most of the reported studies looked at the effect of pH on the size of the aggregates, herein, a detailed mechanistic study is reported, carried out upon modifying the pH to trigger the formation of positively charged ammonium groups. A dramatic and reversible change in the polymerization mechanism and size of the supramolecular fibers is observed and ascribed to the combination of Coulombic repulsive forces and higher monomer solubility. Furthermore, the induced frustrated growth of the fibers is further employed to finely control the one-dimensional supramolecular polymerisation and copolymerization processes.

| S-EPMC8456867 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data