Dataset Information

Mobility Extraction in 2D Transition Metal Dichalcogenide Devices-Avoiding Contact Resistance Implicated Overestimation.

ABSTRACT: Schottky barrier (SB) transistors operate distinctly different from conventional metal-oxide semiconductor field-effect transistors, in a unique way that the gate impacts the carrier injection from the metal source/drain contacts into the channel region. While it has been long recognized that this can have severe implications for device characteristics in the subthreshold region, impacts of contact gating of SB in the on-state of the devices, which affects evaluation of intrinsic channel properties, have been yet comprehensively studied. Due to the fact that contact resistance (R_C ) is always gate-dependent in a typical back-gated device structure, the traditional approach of deriving field-effect mobility from the maximum transconductance (g_m ) is in principle not correct and can even overestimate the mobility. In addition, an exhibition of two different threshold voltages for the channel and the contact region leads to another layer of complexity in determining the true carrier concentration calculated from Q = C_OX * (V_G -V_TH ). Through a detailed experimental analysis, the effect of different effective oxide thicknesses, distinct SB heights, and doping-induced reductions in the SB width are carefully evaluated to gain a better understanding of their impact on important device metrics.

SUBMITTER: Pang CS

PROVIDER: S-EPMC9703574 | biostudies-literature | 2021 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Mobility Extraction in 2D Transition Metal Dichalcogenide Devices-Avoiding Contact Resistance Implicated Overestimation.

Pang Chin-Sheng CS Zhou Ruiping R Liu Xiangkai X Wu Peng P Hung Terry Y T TYT Guo Shiqi S Zaghloul Mona E ME Krylyuk Sergiy S Davydov Albert V AV Appenzeller Joerg J Chen Zhihong Z

Small (Weinheim an der Bergstrasse, Germany) 20210610 28

Schottky barrier (SB) transistors operate distinctly different from conventional metal-oxide semiconductor field-effect transistors, in a unique way that the gate impacts the carrier injection from the metal source/drain contacts into the channel region. While it has been long recognized that this can have severe implications for device characteristics in the subthreshold region, impacts of contact gating of SB in the on-state of the devices, which affects evaluation of intrinsic channel propert ...[more]

PMID: 34110675

Similar Datasets

Project description:Highly efficient and durable flexible solid-state supercapacitors (FSSSCs) are emerging as low-cost devices for portable and wearable electronics due to the elimination of leakage of toxic/corrosive liquid electrolytes and their capability to withstand elevated mechanical stresses. Nevertheless, the spread of FSSSCs requires the development of durable and highly conductive solid-state electrolytes, whose electrochemical characteristics must be competitive with those of traditional liquid electrolytes. Here, we propose an innovative composite solid-state electrolyte prepared by incorporating metallic two-dimensional group-5 transition metal dichalcogenides, namely, liquid-phase exfoliated functionalized niobium disulfide (f-NbS2) nanoflakes, into a sulfonated poly(ether ether ketone) (SPEEK) polymeric matrix. The terminal sulfonate groups in f-NbS2 nanoflakes interact with the sulfonic acid groups of SPEEK by forming a robust hydrogen bonding network. Consequently, the composite solid-state electrolyte is mechanically/dimensionally stable even at a degree of sulfonation of SPEEK as high as 70.2%. At this degree of sulfonation, the mechanical strength is 38.3 MPa, and thanks to an efficient proton transport through the Grotthuss mechanism, the proton conductivity is as high as 94.4 mS cm-1 at room temperature. To elucidate the importance of the interaction between the electrode materials (including active materials and binders) and the solid-state electrolyte, solid-state supercapacitors were produced using SPEEK and poly(vinylidene fluoride) as proton conducting and nonconducting binders, respectively. The use of our solid-state electrolyte in combination with proton-conducting SPEEK binder and carbonaceous electrode materials (mixture of activated carbon, single/few-layer graphene, and carbon black) results in a solid-state supercapacitor with a specific capacitance of 116 F g-1 at 0.02 A g-1, optimal rate capability (76 F g-1 at 10 A g-1), and electrochemical stability during galvanostatic charge/discharge cycling and folding/bending stresses.

Project description:High-entropy (HE) metal chalcogenides are a class of materials that have great potential in applications such as thermoelectrics and electrocatalysis. Layered 2D transition-metal dichalcogenides (TMDCs) are a sub-class of high entropy metal chalcogenides that have received little attention to date as their preparation currently involves complicated, energy-intensive, or hazardous synthetic steps. To address this, a low-temperature (500 °C) and rapid (1 h) single source precursor approach is successfully adopted to synthesize the hexernary high-entropy metal disulfide (MoWReMnCr)S2 . (MoWReMnCr)S2 powders are characterized by powder X-ray diffraction (pXRD) and Raman spectroscopy, which confirmed that the material is comprised predominantly of a hexagonal phase. The surface oxidation states and elemental compositions are studied by X-ray photoelectron spectroscopy (XPS) whilst the bulk morphology and elemental stoichiometry with spatial distribution is determined by scanning electron microscopy (SEM) with elemental mapping information acquired from energy-dispersive X-ray (EDX) spectroscopy. The bulk, layered material is subsequently exfoliated to ultra-thin, several-layer 2D nanosheets by liquid-phase exfoliation (LPE). The resulting few-layer HE (MoWReMnCr)S2 nanosheets are found to contain a homogeneous elemental distribution of metals at the nanoscale by high angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) with EDX mapping. Finally, (MoWReMnCr)S2 is demonstrated as a hydrogen evolution electrocatalyst and compared to 2H-MoS2 synthesized using the molecular precursor approach. (MoWReMnCr)S2 with 20% w/w of high-conductivity carbon black displays a low overpotential of 229 mV in 0.5 M H2 SO4 to reach a current density of 10 mA cm-2 , which is much lower than the overpotential of 362 mV for MoS2 . From density functional theory calculations, it is hypothesised that the enhanced catalytic activity is due to activation of the basal plane upon incorporation of other elements into the 2H-MoS2 structure, in particular, the first row TMs Cr and Mn.

Dataset Information

Mobility Extraction in 2D Transition Metal Dichalcogenide Devices-Avoiding Contact Resistance Implicated Overestimation.

Publications

Mobility Extraction in 2D Transition Metal Dichalcogenide Devices-Avoiding Contact Resistance Implicated Overestimation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets