Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Application of LTA zeolite-modified electrode for sensitive detection of retinoic acid in tap water† † Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d2ra06011f

ABSTRACT: An electrochemical method based on a Linde Type-A zeolite-modified glass carbon electrode (LTA/GCE) was introduced for the determination of retinoic acid (RA). LTA zeolite could be synthesized through a hydrothermal method and served as a commercial electrochemical sensor with high stability and sensitivity in electrochemical progress. The as-synthesized product was characterized by scanning electron microscopy (SEM), differential thermal analysis (DTA), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Under optimal conditions, a detection limit of 0.8 μM was obtained for RA with a linear range of 0.8–20.1 μM. This electrochemical method for determining RA was simpler and cheaper than previously reported methods. Furthermore, the modified electrode could be applied to the detection of RA in tap water, achieving a linear range of 1.4–15.0 μM with a detection limit of 1.4 μM and good recovery. The modified electrode designed by this method provided good selectivity, stability, and reproducibility for RA determination and reliable application for the analysis of RA in environmental water. The LTA zeolite was coated on the GCE surface. RA was selectively adsorbed on the electrode and reacted on its surface, enhancing the electrochemical signal during the progress of DPV. The DPV results showed a good detection limit and recovery.

SUBMITTER: Jiang Y

PROVIDER: S-EPMC9870042 | biostudies-literature | 2023 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Study of Water Adsorption on EDTA-Modified LTA Zeolites.

Project description:The present work deals with the study of water adsorption on acid-modified zeolites A. Commercial zeolites 4A (Na form) and 5A (Ca form) were subjected to EDTA dealumination, and their structure, textural properties and stability were checked by XRD, EDX, NMR and N2 physisorption analyses. The water adsorption isotherms of the parent zeolites and their modified forms were measured at a temperature of 25 °C and up to a relative pressure of 0.9. The results show that the treatment with EDTA drastically changes the structural properties of the zeolites and increases the water adsorption capacity by up to 10%. The changes depend on the type of extra-framework cations (Na+ and Ca2+) and the EDTA concentration.

| S-EPMC9027755 | biostudies-literature

Sensitive Electrochemical Detection of Carcinoembryonic Antigen Based on Biofunctionalized Nanochannel Modified Carbonaceous Electrode.

Project description:The convenient construction of carbon-based electrochemical immunosensors with high performance is highly desirable for the efficient detection of tumor biomarkers. In this work, an electrochemical immunosensor was fabricated by integrating a biofunctionalized mesoporous silica nanochannel film with a carbon-based electrode, which can enable the sensitive determination of carcinoembryonic antigen (CEA) in serum. The commonly used carbonaceous electrode, glassy carbon electrode (GCE), was employed as the supporting electrode and was pre-treated through electrochemical polarization to achieve the stable binding of a vertically ordered mesoporous silica film with amino groups (NH2-VMSF) without the use of any adhesive layer. To fabricate the immunorecognition interface, antibodies were covalently immobilized after the amino groups on the outer surface of NH2-VMSF was derivatized to aldehyde groups. The presence of amino sites within the high-density nanochannels of NH2-VMSF can facilitate the migration of negatively charged redox probes (Fe(CN)63-/4-) to the supporting electrode through electrostatic adsorption, leading to the generation of electrochemical signals. In the presence of CEA, the formation of immunocomplexes on the recognitive interface can reduce the electrochemical signal of Fe(CN)63-/4- on the supporting electrode. Based on this principle, the sensitive electrochemical detection of CEA was achieved. CEA can be determined to range from 0.01 ng mL-1 to 100 ng mL-1 with a limit of detection of 6.3 pg mL-1. The fabricated immunosensor exhibited high selectivity, and the detection of CEA in fetal bovine serum was achieved.

| S-EPMC10892148 | biostudies-literature

Ferrocene-Modified Polyelectrolyte Film-Coated Electrode and Its Application in Glucose Detection.

Project description:A polyelectrolyte film-coated electrode for the quantitative detection of glucose was reported. Carbon nanotubes, graphene oxide and polyelectrolyte with a ferrocenyl group were used to modify an enzyme electrode to facilitate the electron transfer between glucose oxidase and the electrode. Cyclic voltammetry and amperometric methods were adopted to investigate the effects of different polyelectrolytes and carbon nanomaterials on the electrochemical properties of enzyme electrodes. The results indicate that the ferrocenyl groups on a polyelectrolyte skeleton act as a mediator between the redox center of glucose oxidase and the electrode, which efficiently enhances the electron transfer between a glassy carbon electrode and glucose oxidase. The calibration curve of the sensor shows a linear range from 0.2 to 5 mM for glucose response. The sensor can achieve 95% of the steady-state current within 10 s. The electrodes also present high operational stability and long-term storage stability.

| S-EPMC6473894 | biostudies-literature

A Sensitive Impedimetric Aptasensor Based on Carbon Nanodots Modified Electrode for Detection of 17ß-Estradiol.

Project description:A simple and sensitive aptasensor based on conductive carbon nanodots (CDs) was fabricated for the detection of 17ß-Estradiol (E2). In the present study, the hydrothermal synthesis of carbon nanodots was successfully electrodeposited on a screen-printed electrode (SPE) as a platform for immobilization of 76-mer aptamer probe. The morphology and structure of the nanomaterial were characterized by UV-visible absorption spectra, Fluorescence spectra, Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). Moreover, cyclic voltammetry and electrochemical impedance spectroscopy were used to investigate the electrochemical performance of the prepared electrodes. Subsequently, impedimetric (EIS) measurements were employed to investigate the relative impedances changes before and after E2 binding, which results in a linear relationship of E2 concentration in the range of 1.0 × 10-7 to 1.0 × 10 -12 M, with a detection limit of 0.5 × 10-12 M. Moreover, the developed biosensor showed high selectivity toward E2 and exhibited excellent discrimination against progesterone (PRG), estriol (E3) and bisphenol A (BPA), respectively. Moreover, the average recovery rate of spiked river water samples with E2 ranged from 98.2% to 103.8%, with relative standard deviations between 1.1% and 3.8%, revealing the potential application of the present biosensor for E2 detection in water samples.

| S-EPMC7407411 | biostudies-literature

Nanochannel array modified three-dimensional graphene electrode for sensitive electrochemical detection of 2,4,6-trichlorophenol and prochloraz.

Project description:Convenient, and sensitive detection of pesticides and their metabolites in environmental or food samples is critical for assessing potential environmental and health risks. Here, a three-dimensional (3D) electrochemical sensing platform is proposed based on the integration of nanochannel array on pre-activated 3D graphene (p-3DG) electrodes with no need of additional adhesive layers, which enables sensitive detection of prochloraz and 2,4,6-trichlorophenol (TCP) in environmental and food samples. Through two-step electrochemical polarization, organic phase anodic oxidation, and aqueous phase cathodic reduction, p-3DG electrodes with high active area and excellent electrocatalytic performance were obtained. Vertically-ordered mesoporous silica-nanochannel film (VMSF) can be rapidly grown on the surface of p-3DG by an electrochemical-assisted self-assembly (EASA) method. Taking advantage of the high electrocatalytic activity of p-3DG and the ability of nanochannels to enrich TCP through hydrogen bonding, the VMSF/p-3DG sensor can sensitively detect TCP in the range of 10 nM to 0.1 μM and 0.1-15 μM with a low limit of detection (LOD) of 2.4 nM. Compared with p-3DG and VMSF-modified 2D electrodes, the fabricated sensor has a wide detection linear range and low LOD. The coexistence of model interferents such as protein, surfactant, and humic acid did not affect the electrochemical response of TCP, confirming the high anti-fouling ability of the VMSF/p-3DG sensor. In addition, prochloraz in vegetable and fruit samples was indirectly determined because TCP was the metabolite of prochloraz.

| S-EPMC9490055 | biostudies-literature

Fabrication of gold/graphene nanostructures modified ITO electrode as highly sensitive electrochemical detection of Aflatoxin B1.

Project description:Aflatoxins (AFs) are a family of fungal toxins that produced in food and feed by two Aspergillus species (Aspergillus flavus and Aspergillus parasiticus). Several techniques have been reported for AFs detection including high-pressure liquid chromatography, enzyme-linked immunosorbent assay, surface plasmon resonance and recombinant immune blotting assay. But, these methods are disadvantaged because they consumed a long time for analysis; in addition, they required a piece of complicated and expensive equipment. Therefore, developing of inexpensive sensors with high selectivity and sensitivity for detecting of AFs levels without extensive sample preparation has received great attention. Several electrochemical AFs sensors have been reported; however, there is still a need for developing a new, simple and rapid electrochemical AFs sensor. Here, we have developed a new AFs sensor based on Au nanostructures/graphene nanosheets modified ITO substrate that could enhance the Raman effect and the electrochemical conductivity. The modified electrode was prepared based on layer-by-layer electrochemical deposition method. AFs antibody was immobilized onto the Au nanostructures/graphene nanosheets; then it was used as a probe for rapid, simple and cheap detection of AFs level using Raman spectroscopy and electrochemical techniques. Our results demonstrated that the developed system showed a simple, easy and sensitive sensor for monitoring low concentrations of AFB1 with a detection limit of about 6.9 pg/mL, also it allowed the determination of AFB1 in spiked food samples.

| S-EPMC6334944 | biostudies-literature

Synthesis Method and Principle of Octahedral Hierarchical LTA Zeolite and Its Application to Enhance Catalytic Activity in Styrene Epoxidation.

Project description:A 4 Å zeolite prepared under the synergistic effect of intense ultrasound and a high-voltage electrostatic field had an octahedral structure rather than a conventional hexahedral structure. XPS and XRD analyses showed that the ratio of silicon to aluminum, 2θ peak position, and the corresponding crystal planes were the same as those in traditional hexahedral 4 Å zeolite, but some crystal planes were more prominent. SEM imaging showed that the octahedral zeolites had a larger particle size. Porosimetry (BET surface area and BJH analysis) showed that the octahedral zeolite had become a mesoporous zeolite, and its specific surface area increased and its pore size expanded, which was conducive to loading catalytically active materials and thus improving its catalytic performance. In this paper, the mechanism of formation of hierarchical LTA zeolite is discussed, and the octahedral hierarchical LTA zeolite is used to catalyze the epoxidation of styrene, giving very good results. It is concluded that the (600), (622), (642), and (644) crystal planes played a decisive role in the styrene epoxidation reaction, providing a realistic basis for explaining the crystal plane catalysis effect of the 4 Å zeolite. This new zeolite prepared under the synergistic effect of intense ultrasound and a high-voltage electrostatic field, being the first time to prepare the octahedral hierarchical LTA zeolite, is simple to produce, green, and environmentally friendly and has good economic development prospects compared to the use of templating agents, which not only provides ideas and simpler methods for optimizing the performance of traditional zeolites and developing new zeolites with better performance but also enhances the theoretical basis for preparing new zeolites.

| S-EPMC11425629 | biostudies-literature

The effect of guest cations on proton conduction of LTA zeolite.

Project description:Zeolites as important crystalline microporous materials have been widely used as catalysts, sorbents and ion-exchangers. In such materials, the guest ions in the pores can not only balance the charge of the framework but also make a difference to the pore environment and the resulting performance. In this work, we focus on the proton conduction properties of zeolites, and have comprehensively studied for the first time the effect of guest ions on proton conduction. To this end, aluminosilicate NaA zeolite (LTA) and ion-exchanged NaA zeolites by different guest ions (i.e. Li+, K+, Mg2+, Ca2+ and Sr2+) have been successfully synthesized. The study indicates that the guest ions could affect the proton conduction properties through the synergistic effect between the pore features (e.g. pore size, pore polarity, etc.) and guest ions, the ionic concentrations, and the interference between different ions. Among various guest ions, the existence of Na+ ions can greatly promote the proton conduction properties. The proton conductivity of NaA can reach 1.98 × 10-3 S cm-1 (100% RH) at room temperature and 9.12 × 10-3 S cm-1 (80 °C) under the condition of 100% RH. In addition, guest monovalent ions (Li+, Na+ and K+) exhibit better proton conductivity than divalent ions (Mg2+, Ca2+ and Sr2+). The distinct effect of these guest ions enables zeolites with tunable proton conductivity, which will provide more opportunities to design zeolitic proton conducting materials.

| S-EPMC8694635 | biostudies-literature

Tripeptide Derivative-Modified Glassy Carbon Electrode: A Novel Electrochemical Sensor for Sensitive and Selective Detection of Cd2+ Ions.

Project description:A N-[(Benzyloxy)carbonyl]-l-alanyl-l-prolyl-l-leucine-N-cyclohexylcyclohexanamine (Cbz-APL) tripeptide-coated glassy carbon electrode (GCE)-based sensor was used for sensitive and selective recognition of cadmium ions in environmental water. Detailed cyclic voltammetric and electrochemical impedance spectroscopic studies were performed to investigate the charge transfer and sensing activity of the developed electrochemical sensor. Square wave anodic stripping voltammetry (SWASV) was employed to further investigate the sensitivity, selectivity, validity, and applicability of the developed sensor. A sharp electrochemical signal of oxidized Cd at -0.84 V versus Ag/AgCl provides evidence for the higher sensing ability of Cbz-APL/GCE than bare GCE at -0.79 V. Moreover, on Cbz-APL/GCE, extraordinary low detection limits of 4.34 fM and linearity range of 15 nM to 0.1 pM with coefficients of correlation higher than 0.99 for Cd2+ were achieved. Besides, the influence of inorganic and organic interferents on the targeted analyte signals was examined, and high selectivity of Cbz-APL/GCE for Cd2+ ions was observed. Lastly, the validity and applicability of the developed electrochemical sensor for the detection of Cd2+ ions were checked in real water samples, and 100% recovery was obtained.

| S-EPMC7203962 | biostudies-literature

Sensitive electrochemical sensor based on nickel/PDDA/reduced graphene oxide modified screen-printed carbon electrode for nitrite detection.

Project description:A simple, rapid method of the determination of nitrite in food samples is reported by using a highly sensitive electrochemical sensor based on nickel, poly(diallyldimethylammonium chloride) (PDDA), reduced graphene oxide (rGO) and a disposable screen-printed carbon electrode (SPCE). The method is based on a modification of the electrode to enhance the sensitivity and selectivity of the disposable and applicable SPCE, which is essential for the present analytical challenge. The nitrite determination was performed by using a cyclic voltammetry (CV) method under optimum conditions. Ni/PDDA/rGO/SPCE showed a linear working range of 6 to 100 μM of nitrite concentration. The limit of detection and limit of quantification were 1.99 μM (S/N = 3) and 6.6 μM (S/N = 10), respectively. The sensitivities were 0.453 μA μM-1 cm-2 for the lower concentration range and 0.171 μA μM-1 cm-2 for the higher concentration range. The Ni/PDDA/rGO sensor also showed excellent anti-interference ability and good long-term stability. The purposed disposable sensor was successfully applied to determine nitrite in sausages and pickled vegetable samples with satisfactory recovery.

| S-EPMC9562089 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data