Electroactive and Stretchable Hydrogels of 3,4-Ethylenedioxythiophene/thiophene Copolymers
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC9948203 | biostudies-literature | 2023 Feb
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This paper reports a multifunctional zwitterionic poly(sulfobetaine-3,4-ethylenedioxythiophene) (PSBEDOT), which could be facilely synthesized by electropolymerization in aqueous solution. The PSBEDOT surface exhibits excellent conductivity, stability and switchable antifouling/antimicrobial properties. It shows great promise for applications in organic bioelectronics. This new material may significantly increase the performance and service life, minimize the foreign body reaction, improve the biocompatibility and reduce the infection of bio-electronic devices.
| S-EPMC5966908 | biostudies-literature
Project description:Ionic charge transport is a ubiquitous language of communication in biological systems. As such, bioengineering is in constant need of innovative, soft, and biocompatible materials that facilitate ionic conduction. Low molecular weight gelators (LMWGs) are complex self-assembled materials that have received increasing attention in recent years. Beyond their biocompatible, self-healing, and stimuli responsive facets, LMWGs can be viewed as a "solid" electrolyte solution. In this work, we investigate 3,4-ethylenedioxythiophene (EDOT) as a capping group for a small peptide library, which we use as a system to understand the relationship between modes of assembly and charge transport in supramolecular gels. Through a combination of techniques including small-angle neutron scattering (SANS), NMR-based Van't Hoff analysis, atomic force microscopy (AFM), rheology, four-point probe, and electrochemical impedance spectroscopy (EIS), we found that modifications to the peptide sequence result in distinct assembly pathways, thermodynamic parameters, mechanical properties, and ionic conductivities. Four-point probe conductivity measurements and electrochemical impedance spectroscopy suggest that ionic conductivity is approximately doubled by programmable gel assemblies with hollow cylinder morphologies relative to gels containing solid fibers or a control electrolyte. More broadly, it is hoped this work will serve as a platform for those working on charge transport of aqueous soft materials in general.
| S-EPMC11007859 | biostudies-literature
Project description:The challenge of infectious diseases remains a critical concern to the global public health. Recently, it is common to encounter touch-screen electronic devices everywhere to access services. The surface of such devices may easily get contaminated by an infected person, which leads to transmission of infectious diseases between individuals. Moreover, the challenge is complicated by surgical infections from implantable biomedical devices. Such problems can be minimized by the use of long-term active antimicrobial surface coatings. We present herein the preparation of novel electroactive antimicrobial surface coatings through the covalent attachment of the biguanide moiety onto 3,4-ethylenedioxythiophene (EDOT). The biguanide-functionalized EDOT (EDOT-BG) was thus electropolymerized on different substrates to give the corresponding poly(EDOT-BG) polymer. The poly(EDOT-BG) polymer showed an excellent bactericidal efficiency (∼92% bacterial death) and excellent biocompatibility with mammalian cells. Furthermore, the antimicrobial EDOT-BG was electro-copolymerized with antifouling tetra ethylene glycol functionalized-EDOT (EDOT-EG4) to give a multifunctional poly(EDOT-EG4-co-EDOT-BG) copolymer. The poly(EDOT-EG4-co-EDOT-BG) copolymer showed excellent resistance to protein adsorption and mammalian/bacterial cell binding without losing its bactericidal efficiency. These novel materials can be applied to domestic and bioelectronic devices to minimize infectious diseases.
| S-EPMC9389217 | biostudies-literature
Project description:Three random copolymers PE- co -M1, PE- co -M2, and PE- co -M3 were obtained by electrochemical polymerization of donor-acceptor-donor monomers M1, M2, and M3 with 3,4-ethylenedioxythiophene moiety, respectively, using a 1:1 molar ratio of the corresponding monomers, to find new properties and a more effective way to control the optoelectronic properties in conjugated system. For comparison purpose, polymers P1, P2, and P3 were prepared from the corresponding monomer units M1-M3, respectively, by electrochemical polymerization. We also present efficient synthesis, characterization, and comparative density functional theory (DFT) calculations of the monomers M1-M3 and polymers P1-P3. Cyclic voltammetry, spectroelectrochemistry, and electrochromic properties of all of the polymers P1-P3 and copolymers PE- co -M1, PE- co -M2, and PE- co -M3 were carried out and a throughout comparison was made. We have shown that electrochemical copolymerization is a powerful strategy to tune the highest occupied molecular orbital energy level, band gap, and color of the copolymer. Thus, this finding clearly indicates that the copolymers show significantly different optoelectronic properties compared to their constituent polymers.
| S-EPMC6649091 | biostudies-literature
Project description:Three solution-processable D-A-type conjugated polymers P1, P2 and P3 were successfully synthesized via the Pd-catalyzed Stille cross-coupling copolymerization approach, with 6,8-Dibromo-3,3-bis-decyl-3,4-dihydro-2H-thieno[3,4-b][1,4] dioxepine (M1) and 2,5-Bis(trimethylstannanyl)thiophene (M3) as the donor units and 4,7-Dibromo-5,6-difluoro-2-(2-hexyl-decyl)-2H-benzotriazole (M2) as the acceptor unit, wherein the feed ratio of the three units was 1:3:4 (M1:M2:M3, the same below), 1:1:2 and 3:1:4 for P1, P2, and P3, respectively. The results obtained by our test showed that the feed ratio between the D and A units had a significant effect on both the electrochemical and the spectroelectrochemical properties of the three polymers. The copolymers exhibited a gradually deepening red color in neutral state with the increase of M1 content and then turned to a transmissive grey color in the oxidation state. Also, three copolymers showed good performance in electrochromic parameters, which mainly consists of optical contrast, response time, and coloration efficiency. In general, the excellent electrochromic performances of the copolymers make them outstanding candidates for electrochromic material applications.
| S-EPMC6415233 | biostudies-literature
Project description:Over the past decades, π-conjugated polymers (CPs) have drawn more and more attention and been essential materials for applications in various organic electronic devices. Thereinto, conjugated polymers based on the 3,4-ethylenedioxythiophene (EDOT) backbone are among the high-performance materials. In order to investigate the structure-property relationships of EDOT-based polymers and further improve their electrochemical properties, a series of organic solvent-soluble EDOT-based alternative copolymers consisting of electron-rich fragments (fluorene P1, carbazole P2, and 3,4-alkoxythiophene P3) or electron-deficient moieties (benzotriazole P4 and thieno[3,4-c]pyrrole-4,6-dione P5) were synthesized via direct C-H (hetero)arylation polymerization (DHAP) in moderate to excellent yields (60-98%) with medium to high molecular weights (M n = 3,100-94,000 Da). Owing to their various electronic and structural properties, different absorption spectra (λ max = 476, 380, 558, 563, and 603 nm) as well as different specific capacitances of 70, 68, 75, 51, and 25 F/g with 19, 10, 21, 26, and 69% of capacity retention after 1,000 cycles were observed for P1-P5, respectively. After careful study through multiple experimental measurements and theoretical calculation, appropriate electronic characteristics, small molecular conformation differences between different oxidative states, and well-ordered molecular stacking could improve the electrochemical performance of CPs.
| S-EPMC8586465 | biostudies-literature
Project description:In this study, poly(3,4-ethylenedioxythiophene), a benchmark-conducting polymer, was doped by protons. The doping and de-doping processes, using protonic acid and a base, were fully reversible. We predicted possible doping sites along the polymer chain using density functional theory (DFT) calculations. This study sheds potential light and understanding on the molecular design of highly conductive organic materials.
| S-EPMC6404222 | biostudies-literature
Project description:This paper describes the synthesis and characterization of a class of highly stretchable and degradable semiconducting polymers. These materials are multi-block copolymers (BCPs) in which the semiconducting blocks are based on the diketopyrrolopyrrole (DPP) unit flanked by furan rings and the insulating blocks are poly(ε-caprolactone) (PCL). The combination of stiff conjugated segments with flexible aliphatic polyesters produces materials that can be stretched >100%. Remarkably, BCPs containing up to 90 wt% of insulating PCL have the same field-effect mobility as the pure semiconductor. Spectroscopic (ultraviolet-visible absorption) and morphological (atomic force microscopic) evidence suggests that the semiconducting blocks form aggregated and percolated structures with increasing content of the insulating PCL. Both PDPP and PCL segments in the BCPs degrade under simulated physiological conditions. Such materials could find use in wearable, implantable, and disposable electronic devices.
| S-EPMC6435287 | biostudies-literature
Project description:Recently, alternating current (AC)-bipolar electropolymerization of 3,4-ethylenedioxythiophene (EDOT) has been reported to produce poly(3,4-ethylenedioxythiophene) (PEDOT) fibers from the terminals of bipolar electrodes in acetonitrile solution (MeCN) containing low concentrations of supporting salts in a template-free manner. Here, we extend such methodology in ionic liquid (IL) media. Three kinds of ILs, diethylmethyl(2-methoxyethyl)ammonium tetrafluoroborate ([DEME][BF4]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]), and diethylmethyl(2-methoxyethyl)ammonium bis(trifluoromethylsulfonyl)imide ([DEME][TFSI]), with different electric field transmission efficiencies and diffusion coefficients were employed as solvents for the AC-bipolar electropolymerization of EDOT. A variety of PEDOT morphologies were obtained in these three ILs, showing a relationship with the physicochemical properties of the ILs. We successfully confirmed the growth of PEDOT fibers in ILs and systematically discussed the factors that influenced their growth.
| S-EPMC10061915 | biostudies-literature
Project description:Hydrogels are used as scaffolds for tissue engineering, vehicles for drug delivery, actuators for optics and fluidics, and model extracellular matrices for biological studies. The scope of hydrogel applications, however, is often severely limited by their mechanical behaviour. Most hydrogels do not exhibit high stretchability; for example, an alginate hydrogel ruptures when stretched to about 1.2 times its original length. Some synthetic elastic hydrogels have achieved stretches in the range 10-20, but these values are markedly reduced in samples containing notches. Most hydrogels are brittle, with fracture energies of about 10?J?m(-2) (ref. 8), as compared with ?1,000?J?m(-2) for cartilage and ?10,000?J?m(-2) for natural rubbers. Intense efforts are devoted to synthesizing hydrogels with improved mechanical properties; certain synthetic gels have reached fracture energies of 100-1,000?J?m(-2) (refs 11, 14, 17). Here we report the synthesis of hydrogels from polymers forming ionically and covalently crosslinked networks. Although such gels contain ?90% water, they can be stretched beyond 20 times their initial length, and have fracture energies of ?9,000?J?m(-2). Even for samples containing notches, a stretch of 17 is demonstrated. We attribute the gels' toughness to the synergy of two mechanisms: crack bridging by the network of covalent crosslinks, and hysteresis by unzipping the network of ionic crosslinks. Furthermore, the network of covalent crosslinks preserves the memory of the initial state, so that much of the large deformation is removed on unloading. The unzipped ionic crosslinks cause internal damage, which heals by re-zipping. These gels may serve as model systems to explore mechanisms of deformation and energy dissipation, and expand the scope of hydrogel applications.
| S-EPMC3642868 | biostudies-literature