The Yersinia pestis NlpD Lipoprotein is important for iron assimilation and is functionally linked to the twin-arginine translocation system
Ontology highlight
ABSTRACT:
ORGANISM(S): Yersinia pestis
PROVIDER: GSE101490 | GEO | 2017/07/18
SECONDARY ACCESSION(S): PRJNA394674
REPOSITORIES: GEO
Similar Datasets
Project description:Cultures of Y. pestis Kimberley53 virulent strain were exposed to different concentrations of ciprofloxacin (including 0.016 µg/ml representing the strains' MIC value) for various time periods. Total RNA samples were extructed and used for cRNA synthesis and labelling (using Cy3-CTP for the treated samples and Cy5-CTP for the non-treated sample in one biological experiment and dye swap for the 2nd replicate of independent biological experiment). 8 Labeled cRNA samples were hybridized to custom made Agilent 8x15K slide (each slide represent 1 time point). Goal: Identifing alterations in gene expression profile which correlates with the ciprofloxacin induced growth inhibition. Those altered mRNA transcrips will be used as a markers for the development of rapid molecular Antibiotic Susceptibility Test.
2016-03-30 | GSE79687 | GEO
Project description:Cultures of Y. pestis Kimberley53 virulent strain were exposed to different concentrations of ciprofloxacin (including 0.016 µg/ml representing the strains' MIC value) for various time periods. Total RNA samples were extructed and used for cRNA synthesis and labelling (using Cy3-CTP for the treated samples and Cy5-CTP for the non-treated sample in one biological experiment and dye swap for the 2nd replicate of independent biological experiment). 8 Labeled cRNA samples were hybridized to custom made Agilent 8x15K slide (each slide represent 1 time point). Goal: Identifing alterations in gene expression profile which correlates with the ciprofloxacin induced growth inhibition. Those altered mRNA transcrips will be used as a markers for the development of rapid molecular Antibiotic Susceptibility Test. Y. perstis exposed to 0.001, 0.016, 0.5 and 4 µg/ml ciprofloxacin, compared to growth control (non treated) sample, for 3 time periods (45, 90 and 120 min.). Two independent biological replicates were performed. Extracted total RNA were used for cRNA synthesis and labeling with Cy3/Cy5-CTP, hybridized to Agilent custom-made 8x15K slide format.
2016-03-30 | E-GEOD-79687 | biostudies-arrayexpress
Project description:Transcriptional profiling of gyr(-) strain of Mycobacterium tuberculosis H37Ra comparing 20ng/ml ATc treated cells with ATc-untreated cells after 4 days of treatment with shaking at 200rpm at 37°C.
2019-03-07 | GSE120139 | GEO
Project description:ratio experiment by combining dye-reversal ratio profiles CD4+ alpha beta T cells were positively sorted from LatY136F or from wild-type spleen using a MACS and anti-CD4 beads. Gamma delta T cells were sorted from the spleen of Lat3YF and of Eb-/- mice using MACS and anti-CD5 beads. In vitro differentiated Th1 and Th2 cells were generated by culturing naive wild-type CD4+ T cells for 4 days in complete RPMI in the presence of anti-CD3 (1 µg/ml) plus anti-CD28 (1 µg/ml) with the addition of IL-12 (10ng/ml) and of anti-IL-4 (5µg/ml) for Th1-polarizing conditions, and of IL-4 (20ng/ml) plus anti-IFN-gamma (10µg/ml) for Th2-polarizing conditions. RNA was prepared using the Trizol method followed by DNAse digestion. Microarray experiments were carried out as two-color ratio hybridizations. RNA labeling was performed with a Fluorescent Linear Amplification Kit (Agilent Technologies). In brief, cDNA was reverse transcribed from 4 µg total RNA with an oligo-dT-T7 promoter primer and MMLV-RT. Second strand synthesis was carried out with random hexamers. Fluorescent antisense cRNA was synthesized with either cyanine 3-CTP (Cy3-CTP) or cyanine 5-CTP (Cy5-CTP) and T7 polymerase. The fluorescent-labeled antisense cRNA was precipitated over night with LiCl, ethanol washed and resuspended in water. The purified products were quantified at A552nm for Cy3-CTP and A650nm for Cy5-CTP and labeling efficiency was verified with a Nanodrop photometer (Kisker, Steinfurt, Germany). Before hybridization, 1.25 µg labeled cRNA of each product were fragmented and mixed with control targets and hybridization buffer according to the supplier's protocol (Agilent Technologies). Hybridizations were done over night for approximately 17 h at 60°C. The slides were washed according to the manufacturer's manual and scanning of microarrays was performed with 5 µm resolution using a DNA microarray laser scanner (Agilent Technologies). In order to compensate dye specific effects, and to ensure statistically relevant data, a color swap dye reversal was performed. Features were extracted with an image analysis tool Version A 6.1.1 (Agilent Technologies) using default settings. Data analysis was carried out on the Rosetta Inpharmatics platform Resolver Built 4.0. Expression patterns were identified by stringent data analysis using anti-correlation of the dye reversal ratio profiles and a 2fold expression cut-off of the ratio experiments. By combining the first and the second criteria of analysis we filtered out data points with low P-value (P-value < 0.01), making the analysis robust and reproducible. Additionally, by using this strategy we did the data selection independent of error models implemented in the Rosetta Resolver system. Keywords: other
2005-03-01 | GSE2287 | GEO
Project description:ratio experiment by combining dye-reversal ratio profiles CD4+ alpha beta T cells were positively sorted from LatY136F or from wild-type spleen using a MACS and anti-CD4 beads. Gamma delta T cells were sorted from the spleen of Lat3YF and of Eb-/- mice using MACS and anti-CD5 beads. In vitro differentiated Th1 and Th2 cells were generated by culturing naive wild-type CD4+ T cells for 4 days in complete RPMI in the presence of anti-CD3 (1 µg/ml) plus anti-CD28 (1 µg/ml) with the addition of IL-12 (10ng/ml) and of anti-IL-4 (5µg/ml) for Th1-polarizing conditions, and of IL-4 (20ng/ml) plus anti-IFN-gamma (10µg/ml) for Th2-polarizing conditions. RNA was prepared using the Trizol method followed by DNAse digestion. Microarray experiments were carried out as two-color ratio hybridizations. RNA labeling was performed with a Fluorescent Linear Amplification Kit (Agilent Technologies). In brief, cDNA was reverse transcribed from 4 µg total RNA with an oligo-dT-T7 promoter primer and MMLV-RT. Second strand synthesis was carried out with random hexamers. Fluorescent antisense cRNA was synthesized with either cyanine 3-CTP (Cy3-CTP) or cyanine 5-CTP (Cy5-CTP) and T7 polymerase. The fluorescent-labeled antisense cRNA was precipitated over night with LiCl, ethanol washed and resuspended in water. The purified products were quantified at A552nm for Cy3-CTP and A650nm for Cy5-CTP and labeling efficiency was verified with a Nanodrop photometer (Kisker, Steinfurt, Germany). Before hybridization, 1.25 µg labeled cRNA of each product were fragmented and mixed with control targets and hybridization buffer according to the supplier's protocol (Agilent Technologies). Hybridizations were done over night for approximately 17 h at 60°C. The slides were washed according to the manufacturer's manual and scanning of microarrays was performed with 5 µm resolution using a DNA microarray laser scanner (Agilent Technologies). In order to compensate dye specific effects, and to ensure statistically relevant data, a color swap dye reversal was performed. Features were extracted with an image analysis tool Version A 6.1.1 (Agilent Technologies) using default settings. Data analysis was carried out on the Rosetta Inpharmatics platform Resolver Built 4.0. Expression patterns were identified by stringent data analysis using anti-correlation of the dye reversal ratio profiles and a 2fold expression cut-off of the ratio experiments. By combining the first and the second criteria of analysis we filtered out data points with low P-value (P-value < 0.01), making the analysis robust and reproducible. Additionally, by using this strategy we did the data selection independent of error models implemented in the Rosetta Resolver system. Keywords: other
2005-03-01 | GSE2286 | GEO
Project description:Total RNA from each sample was quantified using the NanoDrop ND-1000. The sample preparation and microarray hybridization were performed based on the Arraystar’s standard protocols. Briefly, total RNA from each sample was amplified and transcribed into fluorescent cRNA utilizing random primer according to Arraystar’s Super RNA Labeling protocol (Arraystar Inc.). The labeled cRNAs were hybridized onto the Arraystar Human circRNA Array (8x15K, Arraystar). After having washed the slides, the arrays were scanned by the Agilent Scanner G2505C.
2020-02-05 | GSE138589 | GEO
Project description:Total RNA was quantified by the NanoDrop ND-2000 (Thermo Scientific)and the RNA integrity was assessed using Agilent Bioanalyzer 2100 (Agilent Technologies). The sample labeling, microarray hybridization and washing were performed based on the manufacturer's standard protocols. Briefly, total RNA were transcribed to double strand cDNA, then synthesized into cRNA and labeled with Cyanine-3-CTP. The labeled cRNAs were hybridized onto the microarray. After washing, the arrays were scanned by the Agilent Scanner G2505C (Agilent Technologies).
2021-02-04 | GSE166057 | GEO
Project description:To investigate the effect of CodY mutation on the gene expression in Streptococcus suis serotype 2 SC19 strain, we have employed whole genome microarray expression profiling as a discovery platform to identify genes regulated by CodY mutation. DNA microarray analysis was performed using an Agilent custom-designed oligonucleotide microarray. Based upon the whole genome sequence of SC19 , specific 60-mer oligonucleotide probes were designed using eArray (https://earray.chem.agilent.com/earray/), to cover all annotated genes. Probes were printed seven times on microarray slides. Three biological replicates of total RNA from two wild type strains and from two codY mutant strains were amplified and labeled with Cy3-CTP using Low Input Quick Amp Labeling Kit, one-color(Agilent technologies, US), following the manufacturer’s instructions. Labeled cRNA was purified using the RNeasy mini kit (Qiagen). After fragmentation, microarray slides were hybridized with 600 ng Cy3-labeled cRNA. Hybridization was performed at 65 °C for 17 h with rotation at 10 rpm. Microarray slides were washed and scanned by an Agilent Microarray Scanner (G2565BA). Those genes with greater than two-fold change ratios were regarded as differentially expressed genes.
2015-04-21 | GSE68068 | GEO
Project description:Fresh MEC1 cells (chronic lymphocytic leukemia) (ACC-497, DSMZ) previously untreated and treated in cultures in vitro with glycodendrimers (nanoparticle with maltotriose on the surface). MEC1 cells were centrifuged after incubation with drugs or dendrimers. Agilent’s Low Input Quick Amp Labeling Kit was used to generate fluorescent cRNA (complimentary RNA) with a sample input 100ng of total RNA for two-color processing. The method uses T7 RNA polymerase, which simultaneously amplifies target material and incorporates cyanine 3- or cyanine 5-labeled CTP. Amplification is typically at least a 100-fold from total RNA to cRNA with the use of this kit. cRNA quantification had been done using NanoDrop ND-1000 UV-VIS Spectrophotometer version 3.2.1. Arrays were placed onto the gaskets and than to the slide chamber in rotisserie in a hybridization oven set. Hybrydization was carried out at 65-Celsius degrees for 17 hours. Arrays were scanning using Agilent Scanner. Scan resolution was set up for 3μM.
2015-04-22 | GSE68094 | GEO
Project description:Comparison of gene expression between the virulent Rickettsia rickettsii R strain and avirulent Rickettsia rickettsii Iowa. Keywords: virulent vs avirulent
2008-06-04 | GSE8041 | GEO