Dataset Information

LCMS Analysis of V5-KEAP1 +/- Drug, Wood Lab

ABSTRACT: Coomassie stained SDS-PAGE bands were subjected to standardized in-gel trypsin digestion in which gel bands were subjected to reduction with 10 mM dithiolthreitol, alkylated with 20 mM iodoacetamide, and digested with 100ng of sequencing grade modified trypsin (Promega). Extracted peptides were lyophilized to dryness and resuspended in 12 uL of 0.2% formic acid/2% acetonitrile. Samples were subjected to chromatographic separation on a Waters NanoAquity UPLC equipped with a 1.7 um BEH130 C18 75 um I.D. x 250 mm reversed-phase column. The mobile phase consisted of (A) 0.1% formic acid in water and (B) 0.1% formic acid in acetonitrile. Following a 3 uL injection, peptides were trapped for 3 min on a 5 um Symmetry C18 180 um I.D. x 20 mm column at 5 ul/min in 99.9% A. The analytical column was then switched in-line and a linear elution gradient of 5% B to 40% B was performed over 30 min at 400 nL/min. The analytical column was connected to a fused silica PicoTip emitter (New Objective, Cambridge, MA) with a 10 um tip orifice and coupled to an Oribtrap Fusion Lumos mass spectrometer (Thermo) through an electrospray interface operating in a data-dependent mode of acquisition. The instrument was set to acquire a precursor MS scan from m/z 200-1500 in the Orbitrap at r=120,000 with MS/MS spectra acquired in the Ion Trap with AGC setting of 1e4 and 100ms. For all experiments, stepped HCD energy settings were 28.5, 30, 31.5v and a 20 s dynamic exclusion was employed for previously fragmented precursor ions.

INSTRUMENT(S): Orbitrap Fusion Lumos

ORGANISM(S): Homo Sapiens (ncbitaxon:9606)

SUBMITTER: Kris Wood

PROVIDER: MSV000100060 | MassIVE | Mon Dec 01 06:09:00 GMT 2025

SECONDARY ACCESSION(S): PXD071428

REPOSITORIES: MassIVE

ACCESS DATA

Dataset's files

Source:

			Action	DRS
		Other

Items per page:

1 - 1 of 1

Similar Datasets

Project description:Female Sprague-Dawley rats were randomly separated into two groups: i) trained (Ex group) and ii) sedentary (Cont group). Animals from the Ex group were adapted to treadmill exercise for two consecutive weeks, involving a gradual increase in the running time till 60 min/day at 20 m/min, 0% grade, 5 days/week. This exercise program remained constant until the end of the 54 weeks. Mitochondria isolation from 10 animals (5 Ex group and 5 Cont group) was performed using the conventional methods of differential centrifugation. Mitochondrial protein extracts were reduced with dithiothreitol, alkylated with iodoacetamide and digested with trypsin using the FASP procedure (18). Briefly, each sample was solubilized in 4 % SDS, 0.1 M DTT, 0.1 M HEPES and incubated for 30 min at 60 C. Then, samples were mixed with 0.2 mL of a solution of 8 M Urea, 0.1 M HEPES, pH 8.5 (UH solution), loaded into the filtration devices (3k Microcon, Millipore), centrifuged at 14,000 g for 20 min, and washed twice with UH solution. After centrifugation, the concentrates were alkylated with 50 mM iodoacetamide in UH solution (dark, 25 C, 20 min), and washed twice with UH solution. The concentrate was diluted with 0.1 mL of 50 mM ammonium bicarbonate (ABC) and digested overnight (37 C) with the addition of 2 ug of trypsin diluted in 30 uL of 50 mM ABC. The resulting tryptic peptides were collected by centrifugation and the filter were washed twice with 50 uL of 50 mM ABC. Eluted peptides were acidified with 10 uL of formic acid and cleaned up on a homemade Empore C18 column (3M, St. Paul, MN, USA) (ref) for subsequent phospho-enrichment and/or analysis by LC-MS/MS. The dried protein digest was dissolved with 10 uL (3 % ACN, 0.1 % TFA), diluted 1:5 with loading buffer (1 M glycolic acid, 5 % TFA, 80 % ACN) and phosphopeptides were enriched on TiO2-beads as previously described (19). Briefly 5 mg of "Titansphere TiO2 5 um" were suspended in 100 uL of 100 % ACN, immobilized in a pipette-column and washed using 5 uL of loading buffer. Each sample was loaded in each pipette-column and then washed with 30 uL of washing buffer (1 % TFA, 80 % ACN). Phosphopeptides were eluted from the beads with 25 uL of 25 % ACN (v/v) containing 25 % NH4OH (m/v), acidified with 10 uL of 10 % TFA and vacuum- concentrated to approximately 4 uL. Samples were finally diluted to 10 uL with H2O + 0.1% formic acid prior to injection. The peptides mixtures were analyzed by online nanoflow liquid chromatography tandem mass spectrometry (nanoLC-MS/MS) on an EASY-nLC system (Proxeon Biosystems, Odense, Denmark) connected to the LTQ Orbitrap Velos instrument (Thermo Fisher Scientific, Bremen, Germany) through a nanoelectrospray ion source. Six microliters of the peptide mixture were auto-sampled directly onto the analytical HPLC column (120 mm x75 um I.D., 3 um particle size (Nikkyo Technos Co., Ltd.) with a 120-min gradient from 5 % to 50 % ACN in 0.1 % FA. The effluent from the HPLC column was directly electrosprayed into the mass spectrometer. The LTQ Orbitrap Velos instrument was operated in data-dependent acquisition mode to automatically switch between full scan MS and MS/MS acquisition. The MS survey scan was performed in the FT cell recording a window between 350 and 2000 m/z. The resolution was set to 60 000, and the automatic gain control was set to 1,000,000 ions with a maximal acquisition time of 400 ms. The 20 most intense peptide ions with charge states great than or equal to 2 were sequentially isolated to a target value of 5,000 and fragmented in the high-pressure linear ion trap by low-energy CID with normalized collision energy of 35% Q value of 0.25, and an activation time of 10 ms. Raw files were processed using Proteome Discoverer version 1.3 (Thermo Fisher Scientific, Bremen). Peak lists were searched using Mascot software version 2.3 (Matrix Science, UK) against a SwissProt database containing entries corresponding to Rattus norvegicus (version of July 2012), a list of common contaminants, and all the corresponding decoy entries. Trypsin was chosen as enzyme and a maximum of two miscleavages were allowed. Carbamidomethylation (C) was set as a fixed modification, whereas oxidation (M) and phosphorylation (STY) were used as variable modifications. Searches were performed using a peptide tolerance of 7 ppm, a product ion tolerance of 0.5 Da. Resulting data files were filtered for FDR less than 1 % at peptide level.

Project description:For gel band analysis, SDS-PAGE gel bands were subjected to reduction, alkylation, and in-gel tryptic digestion as described here: https://genome.duke.edu/sites/genome.duke.edu/files/In-gelDigestionProtocolrevised_0.pdf. Digested peptides were lyophilized to dryness and resuspended in 12 uL of 0.2% formic acid/2% acetonitrile. Each sample was subjected to chromatographic separation on a Waters NanoAquity UPLC equipped with a 1.7 um HSS T3 C18 75 um I.D. x 250 mm reversed-phase column (NanoFlow data). The mobile phase consisted of (A) 0.1% formic acid in water and (B) 0.1% formic acid in acetonitrile. 3 uL was injected and peptides were trapped for 3 min on a 5 um Symmetry C18 180 um I.D. x 20 mm column at 5 ul/min in 99.9% A. The analytical column was then switched in-line and a linear elution gradient of 5% B to 40% B was performed over 30 min at 400 nL/min. The analytical column was connected to a Fusion Lumos mass spectrometer (Thermo) through an electrospray interface operating in a data-dependent mode of acquisition. The instrument was set to acquire a precursor MS scan from m/z 375-1500 at R=120,000 (target AGC 2e5, max IT 50 ms) with MS/MS spectra acquired in the ion trap (target AGC 5e3, max IT 100 ms). For all experiments, HCD energy settings were 30v and a 20 s dynamic exclusion was employed for previously fragmented precursor ions. Raw LC-MS/MS data files were processed in Proteome Discoverer (Thermo Scientific) and then submitted to independent Mascot searches (Matrix Science) against a Human protein database containing both forward (20260 entries) and reverse entries of each protein. Search tolerances were 5 ppm for precursor ions and 0.8 Da for product ions using trypsin specificity with up to two missed cleavages. Carbamidomethylation (+57.0214 Da on C) was set as a fixed modification, whereas oxidation (+15.9949 Da on M) and deamidation (+0.98 Da on NQ) were considered a dynamic mass modifications. All searched spectra were imported into Scaffold (v4.4, Proteome Software) and scoring thresholds were set to achieve a peptide false discovery rate of 1% using the PeptideProphet algorithm.

Project description:Washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da Oxidation (M) and Carbamidomethyl (C) specified as variable modifications Enzyme specificity was trypsin, 1 missed cleavage was possible

Project description:Bacteria were washed three times in NaCl (150 mM). Cells were resuspended in 1 ml TSU buffer (50 mM Tris pH 8.0, 0.1% SDS, 2.5 M urea) and lysed by two freeze-thaw cycles in liquid nitrogen. Lysate proteins (40 ug) were separated and digested. Digested peptides were separated by nano-LC using an Ultimate 3000 HPLC and autosampler system (Dionex; Amsterdam, Netherlands). Samples (1 ul) were concentrated and desalted onto a micro C18 pre-column (500 um×2 mm, Michrom Bioresources; Auburn, CA, USA) with H2O:CH3CN (98:2, 0.05% trifluoroacetic acid) at 15 ul min−1. After a 4 min wash the pre-column was switched (Valco 10 port valve; Dionex) into line with a fritless nano column (75 u×~10 cm) containing C18 media (5 u, 200 A Magic; Michrom) manufactured according to Gatlin. Peptides were eluted using a linear gradient of H2O:CH3CN (98:2, 0.1% formic acid) to H2O:CH3CN (64:36, 0.1% formic acid) at 250 nl min−1 over 30 min. High voltage (2000 V) was applied to low volume tee (Upchurch Scientific) and the column tip positioned ~0.5 cm from the heated capillary (T = 280 degrees C) of an Orbitrap Velos (Thermo Electron; Bremen, Germany) mass spectrometer. Positive ions were generated by electrospray and the Orbitrap operated in data dependent acquisition mode (DDA). A survey scan m/z 350–1750 was acquired in the Orbitrap (Resolution = 30,000 at m/z 400, with an accumulation target value of 1,000,000 ions) with lockmass enabled. Up to the 10 most abundant ions (>5,000 counts) with charge states >+2 were sequentially isolated and fragmented within the linear ion trap using collisionally induced dissociation with an activation q = 0.25 and activation time of 30 ms at a target value of 30,000 ions. M/z ratios selected for MS/MS were dynamically excluded for 30 s. Peak lists were generated using Mascot Daemon/extract_msn (Matrix Science, Thermo; London, England) using the default parameters, and submitted to the database search program Mascot (version 2.1, Matrix Science). Search parameters were: Precursor tolerance 4 ppm and product ion tolerances +/-0.4 Da; Oxidation (M) and Carbamidomethyl (C) specified as variable modifications, Enzyme specificity was trypsin, 1 missed cleavage was possible

Project description:MicroPoly(A)Pure kits (Ambion) were used to prepare mRNA from P. salmonis-infected and control Atlantic salmon macrophages. Infected and control (24 h incubation) macrophage mRNA samples were subjected to two rounds of amplification using the MessageAmp aRNA kit (Ambion) and manufacturer's instructions. Approximately 400 ng of macrophage mRNA was used as template in the first round of amplification, yielding 8.1 ug of infected macrophage aRNA and 7.8 ug of control macrophage aRNA. Approximately 1 ug of first-round macrophage aRNA was used as template in the second round of amplification, yielding 81.2 ug of infected macrophage aRNA and 83.3 ug of control macrophage aRNA. Infected and control macrophage aRNA samples were visualized on agarose gels to check quality and quantity. Except for the amounts of aRNA and reverse transcription (RT) primer used, macrophage target labeling reactions and microarray hybridizations were identical. Macrophage target syntheses used 5 ug of second-round aRNA and 5 ug of random primers (Roche). RT primers were mixed with aRNA samples, and nuclease-free H2O (Invitrogen) was added to make 10 ul total volume. Samples were incubated at 70 degrees C 4 min, then placed on ice. RT reactions included 50 mM Tris HCl pH 8.3, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 0.5 mM each dATP, dCTP, and dGTP, 0.2 mM dTTP, 0.05 mM Cy3-dUTP or Cy5-dUTP (Amersham), 40U RNAguard ribonuclease inhibitor (Amersham), and 400U Superscript II Rnase H- reverse transcriptase (Invitrogen). RT reactions were incubated at 42 degrees C for 2.5 h, followed by addition of 0.025U RNase A (Sigma) and 1.5U RNase H (New England BioLabs) and incubation at 37 degrees C for 30 min. Labeled targets were cleaned using the Qiaquick PCR purification kit (Qiagen) and precipitated, with 300 mM sodium acetate, 1 ul of 20 ug/ul glycogen (Invitrogen), and 2.5 volumes of 100% ethanol, at -20 degrees C overnight. Each labeled target was recovered by centrifugation (14,000 rpm, 4 degrees C, 1 h), washed in 70% ethanol, air-dried, and resuspended in 60 ul of hybridization buffer: 50% deionized formamide, 5X SSC, 0.1% SDS, 5 ul of 5 ug/ul oligo dT (5'T18[Q-N]3'), 5 ul of 2 ug/ul BSA (Pierce), and 2 ul of 10 ug/ul sonicated human placental DNA (Sigma). Targets were incubated at 96 degrees C for 3 min, and then at 65 degrees C until applied to microarrays. Microarrays were prepared for hybridization by washing 2 X 5 min in 0.1% SDS, washing 5 X 1 min in MilliQ H2O, immersing 3 min in 95 degrees C MilliQ H2O, and drying by centrifugation (2000 rpm, 5 min, in 50 ml conical tube). Microarray hybridizations were run in the dark under HybriSlips hybridization covers (Grace Biolabs) in slide hybridization chambers (Corning) submerged in a 45 degrees C water bath for 16 h. Coverslips were floated off in 45 degrees C (1X SSC, 0.2% SDS), and arrays were washed 1 X 10 min in 45 degrees C (1X SSC, 0.2% SDS), 3 X 4 min in room temperature (0.1X SSC, 0.1% SDS), and 4 X 4 min in room temperature 0.1X SSC. Slides were dried by centrifugation as before. Fluorescent images of hybridized arrays were acquired immediately at 10 um resolution using ScanArray Express (PerkinElmer). The Cy3 and Cy5 cyanine fluors were excited at 543 nm and 633 nm respectively, and the same laser power (90%) and photomultiplier tube (PMT) settings were used for all slides in a study (PMT 72 Cy3, PMT 63 or 64 Cy5 for macrophage study). Fluorescent intensity data were extracted from TIF images using Imagene 5.5 software (Biodiscovery). Keywords: other

Project description:MicroPoly(A)Pure kits (Ambion) were used to prepare mRNA from P. salmonis-infected and control Atlantic salmon head kidney. Head kidney mRNA samples were prepared from pooled (n = 10) infected or control kidney. Approximately 200 ng of infected or control head kidney mRNA was used as template in aRNA synthesis reactions. Two infected head kidney samples were pooled to yield 8.9 ug of aRNA, and a single control head kidney sample contained 8.4 ug of aRNA. Infected and control head kidney aRNA samples were visualized on agarose gels to check quality and quantity (data not shown). Except for the amounts of aRNA and reverse transcription (RT) primer used, head kidney target labeling reactions and microarray hybridizations were identical. Head kidney target syntheses used 2 ug of aRNA and 2 ug of random primers (Roche). RT primers were mixed with aRNA samples, and nuclease-free H2O (Invitrogen) was added to make 10 ul total volume. Samples were incubated at 70 degrees C for 4 min, then placed on ice. RT reactions included 50 mM Tris HCl pH 8.3, 75 mM KCl, 3 mM MgCl2, 10 mM DTT, 0.5 mM each dATP, dCTP, and dGTP, 0.2 mM dTTP, 0.05 mM Cy3-dUTP or Cy5-dUTP (Amersham), 40U RNAguard ribonuclease inhibitor (Amersham), and 400U Superscript II Rnase H- reverse transcriptase (Invitrogen). RT reactions were incubated at 42 degrees C for 2.5 h, followed by addition of 0.025U RNase A (Sigma) and 1.5U RNase H (New England BioLabs) and incubation at 37 degrees C for 30 min. Labeled targets were cleaned using the Qiaquick PCR purification kit (Qiagen) and precipitated, with 300 mM sodium acetate, 1 ul of 20 ug/ul glycogen (Invitrogen), and 2.5 volumes of 100% ethanol, at -20 degrees C overnight. Each labeled target was recovered by centrifugation (14,000 rpm, 4 degrees C, 1 h), washed in 70% ethanol, air-dried, and resuspended in 60 ul of hybridization buffer: 50% deionized formamide, 5X SSC, 0.1% SDS, 5 ul of 5 ug/ul oligo dT (5’T18[Q-N]3’), 5 ul of 2 ug/ul BSA (Pierce), and 2 ul of 10 ug/ul sonicated human placental DNA (Sigma). Targets were incubated at 96 degrees C for 3 min, and then at 65 degrees C until applied to microarrays. Microarrays were prepared for hybridization by washing 2 X 5 min in 0.1% SDS, washing 5 X 1 min in MilliQ H2O, immersing 3 min in 95 degrees C MilliQ H2O, and drying by centrifugation (2000 rpm, 5 min, in 50 ml conical tube). Microarray hybridizations were run in the dark under HybriSlips hybridization covers (Grace Biolabs) in slide hybridization chambers (Corning) submerged in a 45 degrees C water bath for 16 h. Coverslips were floated off in 45 degrees C (1X SSC, 0.2% SDS), and arrays were washed 1 X 10 min in 45 degrees C (1X SSC, 0.2% SDS), 3 X 4 min in room temperature (0.1X SSC, 0.1% SDS), and 4 X 4 min in room temperature 0.1X SSC. Slides were dried by centrifugation as before. Fluorescent images of hybridized arrays were acquired immediately at 10 um resolution using ScanArray Express (PerkinElmer). The Cy3 and Cy5 cyanine fluors were excited at 543 nm and 633 nm respectively, and the same laser power (90%) and photomultiplier tube (PMT) settings were used for all slides in a study (PMT 75 Cy3, PMT 63 or 64 Cy5 for head kidney study). Fluorescent intensity data were extracted from TIF images using Imagene 5.5 software (Biodiscovery). Keywords: other

Project description:Glands were frozen at -80 ºC immediately after being retrieved and stored under this condition until initiating the proteomics analysis protocol. Glands were washed with cold PBS and immersed in 120 l of homogenization buffer (50 mM Tris-HCl, pH 6.8, 10 mM DTT, 4% (w/v) SDS). Glands were boiled for 5 min, incubated overnight at 4 ºC and centrifuged at 4 ºC and 13000 rpm for 10 min. The whole gland proteome of each gland was concentrated as described elsewhere (Bonzon-Kulichenko, F. Garcia-Marques, M. Trevisan-Herraz and J. Vazquez, Journal of Proteome Research, 2015, 14, 700-710 (DOI:10.1021/pr5007284).Briefly, samples were loaded into an SDS-PAGE gel (0.5 mm-thick, 4% stacking, and 10% resolving) and the electrophoresis process was stopped when the front entered 2 mm into the resolving gel. The unseparated protein bands were then visualized by Coomassie staining, excised and digested at 37 ºC overnight with 500 l of 25 g/l chymotrypsin (Promega) in 100 mM Tris-HCl, pH 7.8 containing 10 mM CaCl2. The cleaved peptides were extracted by incubation for 2 h in 100 mM Tris-HCl, pH 7.8 on shaking, acidized with 1% (v/v) trifluoroacetic acid, desalted onto C18 cartridges (Oasis, Waters Corporation, Milford, MA, USA), and dried down.The analysis of the samples proceeded through liquid chromatography-tandem mass spectrometry (LC-MS/MS) using an Easy nLC 1000 nano-HPLC coupled to a Q-Exactive Orbitrap mass spectrometer (Themo Scientific). Peptides were injected onto a C18 reverse-phase precolumn (Acclaim PepMap100, 75-m i.d., 3-m particle size, 2-cm length, Thermo Scientific), and a reverse-phase analytical column (Acclaim PepMap 100, 75-m, i.d., 3-m particle size, 50-cm length, Thermo Scientific) in buffer A [0.1% formic acid (v/v)] and eluted with a 60 min linear gradient of buffer B [90% acetonitrile, 0.1% formic acid (v/v)], at 200 nL/min. Mass spectrometry (MS) runs consisted of 70000 FT-resolution spectra in the 390-1200 m/z wide range, followed by data-dependent MS/MS spectra of the 15 most intense parent ions acquired along the chromatographic run. High-energy collisional (HCD) fragmentation was performed at 27% of normalized collision energy and the isolation window for the parent ion mass was established at 2 Da.

Project description:Abstract still has to be written. The obtained peptide mixtures were introduced into an LC-MS/MS system, the Ultimate 3000 (Dionex, Amsterdam, The Netherlands) in-line connected to an LTQ Orbitrap XL mass spectrometer (Thermo Fisher Scientific, Bremen, Germany). Samples were first loaded on a trapping column (made in-house, 100 um internal diameter (I.D.) x 20 mm, 5 um beads C18 Reprosil-HD, Dr. Maisch). After back-flushing from the trapping column, the sample was loaded on a reverse-phase column (made in-house, 75 um I.D. x 150 mm, 5 um beads C18 Reprosil-HD, Dr. Maisch). Peptides were loaded with solvent A (0.1% trifluoroacetic acid, 2% acetonitrile), and were separated with a linear gradient from 2% solvent A' (0.05% formic acid) to 55% solvent B' (0.05% formic acid and 80% acetonitrile) at a flow rate of 300 nL/min followed by a wash reaching 100% solvent B'. The mass spectrometer was operated in data-dependent mode, automatically switching between MS and MS/MS acquisition for the six most abundant peaks in a given MS spectrum. Full scan MS spectra were acquired in the Orbitrap at a target value of 1E6 with a resolution of 60,000. The six most intense ions were then isolated for fragmentation in the linear ion trap, with a dynamic exclusion of 60 s. Peptides were fragmented after filling the ion trap at a target value of 1E4 ion counts. From the MS/MS data in each LC run, Mascot Generic Files were created using the Mascot Distiller software (version 2.3.01, Matrix Science). While generating these peak lists, grouping of spectra was allowed with a maximum intermediate retention time of 30 s and a maximum intermediate scan count of 5 was used where possible. Grouping was done with 0.005 Da precursor tolerance. A peak list was only generated when the MS/MS spectrum contained more than 10 peaks. There was no de-isotoping and the relative signal to noise limit was set at 2. These peak lists were then searched with the Mascot search engine (Matrix Science) using the Mascot Daemon interface (version 2.3, Matrix Science). Spectra were searched against the human (H. sapiens) Swiss-Prot database. 13C2D3-acetylation of lysine side-chains, carbamidomethylation of cysteine and methionine oxidation to methionine-sulfoxide were set as fixed modifications for the N-terminal COFRADIC analyses. Variable modifications were 13C2D3-acetylation and acetylation of protein N-termini. Pyroglutamate formation of N-terminal glutamine was additionally set as a variable modification. Mass tolerance on precursor ions was set to 10 ppm (with Mascot's C13 option set to 1) and on fragment ions to 0.5 Da. Endoproteinase semi-Arg-C/P (Arg-C specificity with arginine-proline cleavage allowed) was set as enzyme allowing no missed cleavages. The peptide charge was set to 1+, 2+, 3+ and instrument setting was put to ESI-TRAP. Only peptides that were ranked one and scored above the threshold score, set at 99% confidence, were withheld. Quantification of the degree of Nt-Acetylation was performed as described previously (1). All data management was done in ms_lims (2).

Project description:<p>The sample to be tested was fully ground into powder in the grinder, 50 mg of the sample was freeze-dried, 1000 μL of the extraction solution containing the inner target was added (methanol:acetonitrile:water, 2:2:1, v/v/v, internal standard concentration 20 mg/L) and vortex mixed for 30 s; then add the steel ball to the 45 Hz grinder for 10 min, ultrasonic 10 min; the sample to be tested is obtained after filtration. When detecting metabolites, metabolite determination was performed based on the LC-MS system, which mainly consists of Waters Acquity I-Class PLUS ultra-high performance liquid tandem and Waters Xevo G2-XS QTof high-resolution mass spectrometer. Meanwhile, the Waters Acquity UPLC HSS T3 column (1.8 um 2.1 x 100 mm) was used as the chromatographic column. Positive and negative ion modes were used to determine the metabolites. Mobile phase A: 0.1% formic acid aqueous solution; Mobile phase B: 0.1% acetonitrile formate. The mobile phase conditions of liquid chromatography were as follows: the flow rate was 400 μL/min, 0.0 min: 98% flow A, 2% flow B; 0.25 min: 98% flow A, 2% flow B, 10.0 min: 2% flow A, 98% flow B; 13.0 min: 2% flow A, 98% flow B; 13.1 min: 98% flow A, 2% flow B; 15.0 min: 98% flow A, 2% flow B. MSe mode controlled by acquisition software (MassLynx v4.2, Waters) was used for primary and secondary mass spectrum data acquisition. ESI ion source parameters are as follows: Capillary voltage, 2500 V (positive ion mode) or -2000 V (negative ion mode); Cone hole voltage, 30 V; Ion source temperature, 100 °C; Desolvent temperature, 500 °C; Air flow rate, 50 L/h; Desolvent gas flow rate, 800 L/h; Plastic-nucleus ratio (m/z) collection range 50-1200 m/z. In the qualitative and quantitative analysis of metabolites, the original data collected by MassLynx v4.2 were processed by the Progenesis QI software for peak extraction, peak alignment, and other data, and the metabolites were identified based on the Progenesis QI software online METLIN database. Then, based on the results of the total score, MS2 score, and mass error (ppm), the metabolites were qualitatively determined.</p>

Dataset Information

LCMS Analysis of V5-KEAP1 +/- Drug, Wood Lab

Dataset's files

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets