Direct analysis of tobacco specific nitrosamines in tobacco products using a molecularly imprinted polymer-packed column
Ontology highlight
ABSTRACT:
SUBMITTER: Mulder H
PROVIDER: S-EPMC10540244 | biostudies-literature | 2022 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The development of sensitive and selective robust sensor materials for targeted biomarker detection aims to contribute to self-health monitoring and management. Molecularly imprinted polymeric (MIP) materials can perform as biomimetic recognition elements via tailored routes of synthesis for specific target analyte extraction and/or detection. In this work, a sensitive- and selective-lactate MIP has been developed utilizing methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and cross-linker, respectively. The sensitivity of the as-synthesized imprinted species was evaluated by determining the target analyte retention, imprinting factor, and selectivity adsorption of up to 63.5%, 6.86, and 0.82, respectively. MIP selectivity elucidated the imprinting mechanism between the functional monomers and target analyte lactate, further experimentally evidenced by using structurally competitive analytes malic acid and sodium 2-hydroxybutyrate, where retentions of 22.6 and 25.2%, respectively, were observed. Understanding the specific intermolecular mechanisms of both the template analyte and structural interferents with the MIP enables experimentalists to make informed decisions regarding monomer-target and porogen selections and possible sites of interaction for improved molecular imprinting. This imprinting system highlights the potential to be further developed into artificial receptor sensor materials for the detection of disease.
| S-EPMC9996612 | biostudies-literature
Project description:This study developed a novel molecularly imprinted polymer (MIP) that is both conductive and redox-active for directly quantifying perfluorooctanoic acid (PFOA) electrochemically. We synthesized the monomer 3,4-ethylenedioxythiophene-2,2,6,6-tetramethylpiperidinyloxy (EDOT-TEMPO) for electropolymerization on a glassy carbon electrode using PFOA as a template, which was abbreviated as PEDOT-TEMPO-MIP. The redox-active MIP eliminated the need for external redox probes. When exposed to PFOA, both anodic and cathodic peaks of MIP showed a decreased current density. This observation can be explained by the formation of a charge-assisted hydrogen bond between the anionic PFOA and MIP's redox-active moieties (TEMPO) that hinder the conversion between the oxidized and reduced forms of TEMPO. The extent of the current density decrease showed excellent linearity with PFOA concentrations, with a method detection limit of 0.28 ng·L-1. PEDOT-TEMPO-MIP also exhibited high selectivity toward PFOA against other per- and polyfluoroalkyl substances (PFAS) at environmentally relevant concentrations. Our results suggest electropolymerization of MIPs was highly reproducible, with a relative standard deviation of 5.1% among three separate MIP electrodes. PEDOT-TEMPO-MIP can also be repeatedly used with good stability and reproducibility for PFOA detection. This study provides an innovative platform for rapid PFAS quantification using redox-active MIPs, laying the groundwork for developing compact PFAS sensors.
| S-EPMC11325644 | biostudies-literature
Project description:Heated Tobacco Products (HTPs) purport to reduce exposure to tobacco-related toxicants compared to combustible cigarettes. This cross-sectional study examined the content of nicotine, two humectants (propylene glycol (PG) and vegetable glycerin (VG)), and four tobacco-specific nitrosamines (TSNAs: NNN, NNK, NAT, and NAB) in the tobacco filler of a popular HTP brand (IQOS). Non-menthol and menthol IQOS sticks were purchased from nine countries between 2017 and 2020 and were classified into two versions ("Bold" and "Light") using Philip Morris's flavor descriptors. The average nicotine concentration was 4.7 ± 0.5 mg/stick, and the highest nicotine concentration was found in products from Japan (5.1 ± 0.2 mg/stick). VG was the dominant humectant found in all sticks, with an average concentration of (31.5 ± 2.3 mg/stick). NNN, NNK, and NAT were substantially higher in the "Bold" sticks than the "Light" sticks. Significant differences between countries for TSNAs were also observed: the NAT and NAB contents were the highest in the "Light" products from Canada (192.5 ± 24.1 and 22.9 ± 1.0 ng/stick, respectively); the NNK concentration was the highest in the "Bold" products from Poland (64.8 ± 7.9 ng/stick); and the highest NNN concentrations were observed in the "Bold" products from South Africa (488.9 ± 26.7 ng/stick). As NNN and NNK are known human carcinogens, and as humectants like PG and VG can degrade into toxic carbonyl compounds upon heating, monitoring the concentration of these chemicals in HTPs is important for protecting users' health and ensuring compliance with regulations.
| S-EPMC10974984 | biostudies-literature
Project description:Molecularly imprinted polymers (MIPs) are tailor-made synthetic antibodies possessing specific binding cavities designed for a target molecule. Currently, MIPs for protein targets are synthesized by imprinting a short surface-exposed fragment of the protein, called epitope or antigenic determinant. However, finding the epitope par excellence that will yield a peptide "synthetic antibody" cross-reacting exclusively with the protein from which it is derived, is not easy. We propose a computer-based rational approach to unambiguously identify the "best" epitope candidate. Then, using Saturation Transfer Difference (STD) and WaterLOGSY NMR spectroscopies, we prove the existence of specific binding sites created by the imprinting of this peptide epitope in the MIP nanogel. The optimized MIP nanogel could bind the epitope and cognate protein with a high affinity and selectivity. The study was performed on Hepatitis A Virus Cell Receptor-1 protein, also known as KIM-1 and TIM-1, for its ubiquitous implication in numerous pathologies.
| S-EPMC8562893 | biostudies-literature
Project description:Molecularly imprinted polymers (MIP) combine the selectivity of immunoaffinity chromatography with the robustness of common solid-phase extraction in what is referred to as molecularly imprinted solid-phase extraction (MISPE). This contribution shows how MIP design may be guided by pharmacophore modeling for the example of citrinin, which is an emerging mycotoxin from cereals. The obtained pharmacophore model allowed searching public databases for a set of citrinin-mimicking molecular surrogates. Imprinted and non-imprinted polymers were subsequently obtained through bulk and core-shell polymerization in the presence of these surrogates. Evaluation of their binding ability for citrinin and structurally related ochratoxin A revealed a promising MIP derived from rhodizonic acid. A protocol for MISPE of citrinin from cereals was subsequently developed and compared to immunoaffinity chromatography with respect to clean-up efficiency and recovery.
| S-EPMC8402217 | biostudies-literature
Project description:Globally, there is growing concern about the health risks of water and air pollution. The U.S. Environmental Protection Agency (EPA) has developed a list of priority pollutants containing 129 different chemical compounds. All of these chemicals are of significant interest due to their serious health and safety issues. Permanent exposure to some concentrations of these chemicals can cause severe and irrecoverable health effects, which can be easily prevented by their early identification. Molecularly imprinted polymers (MIPs) offer great potential for selective adsorption of chemicals from water and air samples. These selective artificial bio(mimetic) receptors are promising candidates for modification of sensors, especially disposable sensors, due to their low-cost, long-term stability, ease of engineering, simplicity of production and their applicability for a wide range of targets. Herein, innovative strategies used to develop MIP-based sensors for EPA priority pollutants will be reviewed.
| S-EPMC8037679 | biostudies-literature
Project description:4-(Methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) is an important tobacco-specific nitrosamine (TSNA) in the etiology of tobacco-related cancers, and N-glucuronidation is an important mechanism of NNAL detoxification. In the present study, an analysis of the UDP-glucuronosyltransferases (UGTs) responsible for the N-glucuronidation of the TSNAs N'-nitrosonornicotine, N'-nitrosoanabasine, and N'-nitrosoanatabine was performed. Using human embryonic kidney 293 cells overexpressing UGT1A1, UGT1A3, UGT1A4, UGT1A6, UGT1A7, UGT1A8, UGT1A9, UGT1A10, UGT2B4, UGT2B7, UGT2B10, UGT2B11, UGT2B15, and UGT2B17, only UGT1A4 and UGT2B10 exhibited N-glucuronidating activity against these TSNAs. The K(M)s for UGT2B10 were 15 to 22-fold lower than those of UGT1A4 against the three TSNAs and were similar to those observed for microsomes prepared from human liver specimens. The overall activity of UGT2B10 was 3.6 to 27-fold higher than UGT1A4 against the three TSNAs as determined by V(max)/K(M) after normalization by levels of UGT2B10 versus UGT1A4 mRNA. Similarly high levels of activity were also observed for UGT2B10 against a fourth TSNA, NNAL, exhibiting a 6.3-fold lower K(M) and 3-fold higher normalized V(max)/K(M) than that observed for UGT1A4. Real-time polymerase chain reaction analysis showed that UGT2B10 was expressed at a level that, on average, was 26% higher than that observed for UGT1A4 in a screening of normal liver tissue specimens from 20 individual subjects. These data suggest that UGT2B10 is likely the most active UGT isoform in human liver for the N-glucuronidation of TSNAs.
| S-EPMC2714266 | biostudies-literature
Project description:In this work, we present a novel study on the development of an electrochemical biomimetic sensor to detect the ciprofloxacin (CIP) antibiotic. A chitosan gold nanoparticles decorated molecularly imprinted polymer (Ch-AuMIP) was used to modify the glassy carbon electrode (GCE) for preparation of the sensor. The Ch-AuMIP was characterized to understand various properties like chemical composition, morphology, roughness, and conduction using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), atomic force microscopy (AFM) and cyclic voltammetry (CV) respectively. Several experimental conditions affecting the Ch-AuMIP/GCE sensor such as the CIP removal agent, the extraction time, the volume of Ch-AuMIP drop-cast onto GCE and the rebinding time were studied and optimized. The Ch-AuMIP sensor sensitivity was studied in the concentration range of 1-100 μmol L-1 exhibiting a limit of detection of 210 nmol L-1. The synergistic combination of Au nanoparticles and Ch-MIP helps detect the CIP antibiotic with good sensitivity and selectivity, respectively. We investigated the selectivity aspect by using some possible interfering species and the developed sensing system showed good selectivity for CIP with a 66% response compared to the other compounds (≤45% response). The proposed sensing strategy showed its applicability for successful detection of CIP in real samples like tap water, mineral water, milk, and pharmaceutical formulation. The developed sensor showed good selectivity towards CIP even among the analogue molecules of Norfloxacin (NFX) and Ofloxacin (OFX). The developed sensor was successfully applied to determine the CIP in different samples with a satisfactory recovery in the range of 94 to 106%.
| S-EPMC9051084 | biostudies-literature
Project description:Congo red (CR) is an anionic azo dye widely used in many industries including pharmaceutical, textile, food and paint industries. The disposal of huge amount of CR into the various streams of water has posed a great threat to both human and aquatic life. Therefore, it has become an important aspect of industries to remove CR from different water sources. Molecular imprinting technology is a very slective method to remove various target pollutant from environment. In this study a precipitation polymerization was employed for the effective and selective removal of CR from contaminated aqueous media. A series of congo red molecularly imprinted polymers (CR-MIPs) of uniform size and shape was developed by changing the mole ratio of the components. The optimum ratio (0.1:4: 20, template, functional monomer and cross-linking monomer respectively) for CR1-MIP from synthesized polymers was able to rebind about 99.63% of CR at the optimum conditions of adsorption parameters (contact time 210 min, polymer dosage 0.5 g, concentration 20 ppm and pH 7). The synthesized polymers were characterized by various techniques such as Fourier Infra-red spectroscopy (FTIR), scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDX), and Brumauer-Emmett-Teller (BET). The polymer particles have successfully removed CR from different aqueous media with an efficiency of about?~?90%.
| S-EPMC7118869 | biostudies-literature
Project description:Molecularly imprinted polymer nanoparticles (nanoMIPs) are high affinity synthetic receptors which show promise as imaging and therapeutic agents. Comprehensive analysis of the in vivo behaviour of nanoMIPs must be performed before they can be considered for clinical applications. This work reports the solid-phase synthesis of nanoMIPs and an investigation of their biodistribution, clearance and cytotoxicity in a rat model following both intravenous and oral administration. These nanoMIPs were found in each harvested tissue type, including brain tissue, implying their ability to cross the blood-brain barrier. The nanoMIPs were cleared from the body via both faeces and urine. Furthermore, we describe an immunogenicity study in mice, demonstrating that nanoMIPs specific for a cell surface protein showed moderate adjuvant properties, whilst those imprinted for a scrambled peptide showed no such behaviour. Given their ability to access all tissue types and their relatively low cytotoxicity, these results pave the way for in vivo applications of nanoMIPs.
| S-EPMC9655879 | biostudies-literature