Blood-inspired random bit generation using microfluidics system
Ontology highlight
ABSTRACT:
SUBMITTER: Yoon I
PROVIDER: S-EPMC10980712 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Generating true random bits of high quality at high data rates is usually viewed as a challenging task. To do so, physical sources of entropy with wide bandwidth are required which are able to provide truly random bits and not pseudorandom bits, as it is the case with deterministic algorithms and chaotic systems. In this work we demonstrate a reliable high-speed true random bit generator (TRBG) device based on the unpredictable electrical current time series of atmospheric pressure air microplasma (APAMP). After binarization of the sampled current time series, no further post-processing was needed in order for the bitstreams to pass all 15 tests of the NIST SP 800-22 statistical test suite. Several configurations of the system have been successfully tested at different sampling rates up to 100 MS/s, and with different inter-electrode distances giving visible/non-visible optical emissions. The cost-effectiveness, simplicity and ease of implementation of the proposed APAMP system compared to others makes it a very promising solution for portable TRBGs.
| S-EPMC7708637 | biostudies-literature
Project description:We present a scheme for multi-bit quantum random number generation using a single qubit discrete-time quantum walk in one-dimensional space. Irrespective of the initial state of the qubit, quantum interference and entanglement of particle with the position space in the walk dynamics certifies high randomness in the system. Quantum walk in a position space of dimension 2l + 1 ensures string of (l + 2)-bits of random numbers from a single measurement. Bit commitment with the position space and control over the spread of the probability distribution in position space enable us with options to extract multi-bit random numbers. This highlights the power of one qubit, its practical importance in generating multi-bit string in single measurement and the role it can play in quantum communication and cryptographic protocols. This can be further extended with quantum walks in higher dimensions.
| S-EPMC6707389 | biostudies-literature
Project description:Chaotic semiconductor lasers have been widely investigated for high-speed random bit generation, which is applied for the generation of cryptographic keys for classical and quantum cryptography systems. Here, we propose and demonstrate a self-chaotic microlaser with enhanced chaotic bandwidth for high-speed random bit generation. By designing tri-mode interaction in a deformed square microcavity laser, we realize a self-chaotic laser caused by two-mode internal interaction, and achieve an enhanced chaotic standard bandwidth due to the photon-photon resonance effect by introducing the third mode. Moreover, 500 Gb/s random bit generation is realized and the randomness is verified by the NIST SP 800-22 statistics test. Our demonstration promises the applications of microlasers in secure communication, chaos radar, and optical reservoir computing, and also provides a platform for the investigations of multimode nonlinear laser dynamics.
| S-EPMC11502037 | biostudies-literature
Project description:The healthy functioning of the plants' vasculature depends on their ability to respond to environmental changes. In contrast, synthetic microfluidic systems have rarely demonstrated this environmental responsiveness. Plants respond to environmental stimuli through nastic movement, which inspires us to introduce transformable microfluidics: By embedding stimuli-responsive materials, the microfluidic device can respond to temperature, humidity, and light irradiance. Furthermore, by designing a foldable geometry, these responsive movements can follow the preset origami transformation. We term this device TransfOrigami microfluidics (TOM) to highlight the close connection between its transformation and the origami structure. TOM can be used as an environmentally adaptive photomicroreactor. It senses the environmental stimuli and feeds them back positively into photosynthetic conversion through morphological transformation. The principle behind this morphable microsystem can potentially be extended to applications that require responsiveness between the environment and the devices, such as dynamic artificial vascular networks and shape-adaptive flexible electronics.
| S-EPMC9067916 | biostudies-literature
Project description:Probabilistic computing-quantum-inspired computing that uses probabilistic bits (p-bits)-has emerged as a powerful method owing to its fast search speed and robust connectivity. Previous works used linear feedback shift registers (LFSRs) or stochastic magnetic tunnel junctions (MTJs) to implement p-bits. However, in large-scale problems, periodicity and correlation issues in LFSR p-bits and inherent variations in MTJ-based p-bits with narrow stochastic regions lead to unreliable results when seeking the appropriate solution. Therefore, we propose a fully CMOS frequency-scalable p-bit implemented with a discrete-time flipped-hook tent-map chaotic oscillator. The proposed chaotic oscillator produces high-quality noise voltage that is uniformly distributed across the entire supply voltage range, enabling aligned responses of p-bits free from calibration and an input resolution of 8 bits. In contrast to LFSR-based p-bits with hardware-dependent correlation, the chaotic oscillator p-bits could factorize semiprimes with lengths up to 64 bits without changing hardware size. The chaotic oscillator exhibited an energy efficiency of 4.26 pJ/bit at 1.8 V supply voltage. The robustness and the high randomness of the proposed chaotic oscillator p-bit suggest a new direction of a p-bit scalable to large-scale probabilistic computing.
| S-EPMC11889193 | biostudies-literature
Project description:Aqueous two-phase system (ATPS) droplet generation has significant potential in biological and medical applications because of its excellent biocompatibility. However, the ultralow interfacial tension of ATPS makes droplet generation extremely challenging when compared with the conventional water-in-oil (W/O) system. In this paper, we passively produced ATPS droplets with a wide range of droplet size and high production rate without the involvement of an oil phase and external forces. For the first time, we reported important information of the flow rate and capillary (Ca) number for passive, oil-free ATPS droplet generation. It was found that the range of Ca numbers of the continuous phase under the jetting flow regime is 0.3-1.7, as compared to less than 0.1 in the W/O system, indicating the ultralow interfacial tension in ATPS. In addition, we successfully generated ATPS droplets with a radius as small as 7 μm at the maximum frequency up to 300 Hz, which has not been achieved in previous studies. The size and generation frequency of ATPS droplets can be controlled independently by adjusting the inlet pressures and corresponding flow rates. We found that the droplet size is correlated with the pressure and flow rate ratios with the power-law exponents of 0.8 and 0.2, respectively.
| S-EPMC6645416 | biostudies-literature
Project description:Several microfluidic applications are available for liquid metal droplet generation, but the surface oxidation of liquid metal has placed limitations on its application. Multiphase microfluidics makes it possible to protect the inner droplets by producing the structure of double emulsion droplets. Thus, the generation of liquid metal double emulsion droplets has been developed to prevent the surface oxidation of Galinstan. However, the generation using common methods faces considerable challenges due to the gravity effect introduced from the high density of liquid metal, making it difficult for the shell phase to wrap the inner phase. To overcome this obstacle, we introduce an innovative method - a gravity-induced microfluidic device - to creatively generate controllable liquid metal double emulsion droplets, achieved by altering the measurable inclination angle of the plane. It is found that when the inclination angle ranges from 30° to 45°, the device manages to generate liquid metal double emulsion droplets with perfect double sphere-type configuration. Additionally, the core-shell liquid metal hydrogel capsules present potential applications as multifunctional materials for controlled release systems in drug delivery and biomedical applications. By regulating pH or imposing mechanical force, the hydrogel shell can be dissolved to recover the electrical conductivity of Galinstan for applications in flexible electronics, self-healing conductors, elastomer electronic skin, and tumor therapy.
| S-EPMC9295136 | biostudies-literature
Project description:Probabilistic computing is an emerging computational paradigm that uses probabilistic circuits to efficiently solve optimization problems such as invertible logic, where traditional digital computations are difficult to solve. This paper proposes a true random number generator (TRNG) based on resistive random-access memory (RRAM), which is combined with an activation function implemented by a piecewise linear function to form a standard p-bit cell, one of the most important parts of a p-circuit. A p-bit multiplexing strategy is also applied to reduce the number of p-bits and improve resource utilization. To verify the superiority of the proposed probabilistic circuit, we implement the invertible p-circuit on a field-programmable gate array (FPGA), including AND gates, full adders, multi-bit adders, and multipliers. The results of the FPGA implementation show that our approach can significantly save the consumption of hardware resources.
| S-EPMC9229847 | biostudies-literature
Project description:Hydrogen sulfide (H2S) plays an important role as an intercellular and intracellular signaling molecule, yet its targets are not well understood. As a molecule it easily evaporates and it is hard to acquire stable concentration for in vitro studies, constituting a major problem for the field to identify its downstream targets and function. Here we develop a microfluidic system that can provide consistent and controllable H2S levels in contrast to the current method of delivering large bolus doses to cells. The system relies on the permeability of H2S gas through a polydimethylsiloxane thin membrane. A hydrogen sulfide donor, sodium hydrosulfide, is perfused in the microchannels below the gas permeable membrane and gaseous H2S diffuses across the membrane, providing a stable concentration for up to 5 hours. Using electrochemical sensors within 3 ppm range, we found that H2S concentration was dependent on two parameters, the concentration of H2S donor, sodium hydrosulfide and the flow rate of the solution in the microchannels. Additionally, different H2S concentration profiles can be obtained by alternating the flow rate, providing an easy means to control the H2S concentration. Our approach constitutes a unique method for H2S delivery for in vitro and ex vivo studies and is ideally suited to identify novel biological processes and cellular mechanisms regulated by H2S.
| S-EPMC6168208 | biostudies-literature
Project description:Reconfigurable modular microfluidics presents an opportunity for flexibly constructing prototypes of advanced microfluidic systems. Nevertheless, the strategy of directly integrating modules cannot easily fulfill the requirements of common applications, e.g., the incorporation of materials with biochemical compatibility and optical transparency and the execution of small batch production of disposable chips for laboratory trials and initial tests. Here, we propose a manufacturing scheme inspired by the movable type printing technique to realize 3D free-assembly modular microfluidics. Double-layer 3D microfluidic structures can be produced by replicating the assembled molds. A library of modularized molds is presented for flow control, droplet generation and manipulation and cell trapping and coculture. In addition, a variety of modularized attachments, including valves, light sources and microscopic cameras, have been developed with the capability to be mounted onto chips on demand. Microfluidic systems, including those for concentration gradient generation, droplet-based microfluidics, cell trapping and drug screening, are demonstrated. This scheme enables rapid prototyping of microfluidic systems and construction of on-chip research platforms, with the intent of achieving high efficiency of proof-of-concept tests and small batch manufacturing.
| S-EPMC10495351 | biostudies-literature