Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Pyro-phototronic effect enhanced broadband photodetection based on CdS nanorod arrays by magnetron sputtering.

ABSTRACT: In this work, self-powered photodetectors (PDs) based on RF magnetron sputtering-fabricated CdS nanorod arrays and polished Si substrates were prepared for the first time. By introducing the pyro-phototronic effect of wurtzite CdS, the self-powered PDs exhibit a broadband response range from UV (365 nm) to IR (1310 nm) at zero bias, even beyond the bandgap limit of the material. Both the photoresponsivity and specific detectivity are also enhanced by 23.3 times compared with those only based on the photovoltaic effect. In addition, the rise and fall times of self-powered PDs are 70 μs and 90 μs under 980 nm laser illumination. This research not only expands the application of CdS nanostructures in the field of pyro-phototronics, but also greatly enriches the preparation methods of CdS based pyro-phototronics materials.

SUBMITTER: Li L

PROVIDER: S-EPMC9733663 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Pyro-phototronic effect enhanced broadband photodetection based on CdS nanorod arrays by magnetron sputtering.

Li Lu L Zheng Dingshan D Xiong Yan Y Yu Cheng C Yin Hong H Yu Xiangxiang X

RSC advances 20221209 54

In this work, self-powered photodetectors (PDs) based on RF magnetron sputtering-fabricated CdS nanorod arrays and polished Si substrates were prepared for the first time. By introducing the pyro-phototronic effect of wurtzite CdS, the self-powered PDs exhibit a broadband response range from UV (365 nm) to IR (1310 nm) at zero bias, even beyond the bandgap limit of the material. Both the photoresponsivity and specific detectivity are also enhanced by 23.3 times compared with those only based on ...[more]

PMID: 36540213

Similar Datasets

Pyro-Phototronic Effect Induced Circularly Polarized Light Detection with a Broadband Response.

Project description:Photopyroelectric-based circularly polarized light (CPL) detection, coupling the pyro-phototronic effect and chiroptical phenomena, has provided a promising platform for high-performance CPL detectors. However, as a novel detection strategy, photopyroelectric-based CPL detection is currently restricted by the short-wave optical response, underscoring the urgent need to extend its response range. Herein, visible-to-near-infrared CPL detection induced by the pyro-phototronic effect is first realized in chiral-polar perovskites. Specifically, chiral-polar multilayered perovskites (S-BPEA)2FAPb2I7 (1-S, S-BPEA = (S)-1-4-Bromophenylethylammonium, FA = formamidinium) with spontaneous polarization shows intrinsic pyroelectric and photopyroelectric performance. Strikingly, combining its merits of the pyro-phototronic effect and intrinsic wide-spectrum spin-selective effect, chiral multilayered 1-S presents efficient photopyroelectric-based broadband CPL detection performance spanning 405-785 nm. This research first realizes photopyroelectric-based infrared CPL detection and also sheds light on developing high-performance broadband CPL detectors based on the pyro-phototronic effect in the fields of optics, optoelectronics, and spintronics.

| S-EPMC11423216 | biostudies-literature

Enhanced Electrical Properties of Copper Nitride Films Deposited via High Power Impulse Magnetron Sputtering.

Project description:High Power Impulse Magnetron Sputtering (HiPIMS) has generated a great deal of interest by offering significant advantages such as high target ionization rate, high plasma density, and the smooth surface of the sputtered films. This study discusses the deposition of copper nitride thin films via HiPIMS at different deposition pressures and then examines the impact of the deposition pressure on the structural and electrical properties of Cu3N films. At low deposition pressure, Cu-rich Cu3N films were obtained, which results in the n-type semiconductor behavior of the films. When the deposition pressure is increased to above 15 mtorr, Cu3N phase forms, leading to a change in the conductivity type of the film from n-type to p-type. According to our analysis, the Cu3N film deposited at 15 mtorr shows p-type conduction with the lowest resistivity of 0.024 Ω·cm and the highest carrier concentration of 1.43 × 1020 cm-3. Furthermore, compared to the properties of Cu3N films deposited via conventional direct current magnetron sputtering (DCMS), the films deposited via HiPIMS show better conductivity due to the higher ionization rate of HiPIMS. These results enhance the potential of Cu3N films' use in smart futuristic devices such as photodetection, photovoltaic absorbers, lithium-ion batteries, etc.

| S-EPMC9415204 | biostudies-literature

Enhanced visible light photocatalytic performance of CdS sensitized TiO2 nanorod arrays decorated with Au nanoparticles as electron sinks.

Project description:In this paper, we propose a nanostructure with Au nanoparticles (NPs), as electron sinks, located at the most outside layer of CdS sensitized TiO2 nanorod arrays (TiO2 NRAs/CdS/Au). By the introduction of Au NPs, TiO2 NRAs/CdS/Au performs higher visible light photocatalytic capacity in the degradation of unsymmetrical dimethylhydrazine wastewater than TiO2 NRAs/CdS. The optimal deposition time for Au NPs is 30 s. The visible light induced degradation ability of TiO2 NRAs/CdS/Au (30 s) is 1.4 times that of TiO2 NRAs/CdS. The cycling stability of TiO2 NRAs/CdS is greatly enchanced after Au NPs decoration, which can maintain 95.86% after three cycles. Photoluminescence spectra and photoelectrochemical measurements were carried out to reveal the underlying mechanism for the improved visible light photocatalytic capacity of TiO2 NRAs/CdS/Au. This work demonstrates a promising way for the rational design of metal-semiconductor photocatalysts used in decomposition reaction that can achieve high photocatalytic efficiency.

| S-EPMC5430509 | biostudies-literature

Enhanced photoluminescence from CdS with SiO2 nanopillar arrays.

Project description:In this paper, the enhanced photoluminescence from CdS thin film with SiO2 nanopillar array (NPA) was demonstrated. The CdS was prepared using chemical bath deposition in a solution bath containing CdSO4, SC(NH2)2, and NH4OH. The SiO2 NPA was fabricated by the nanosphere lithography (NSL) techniques. The nanopillar is about 50 nm in diameter, and the height is 150 nm. As a result, the sample with NPA shows an obvious improvement of photoluminescence (PL), compared with the one without NPA. In addition, we also observed that the PL intensity is increased ~5 times if the active layer is deposited on the nanopillar arrays and covered by a thin metal film of Al. It is noteworthy that the enhancement of photoluminescence could be attributed to the roughness of the surface, the 2D photonic band gap (PBG) effect and the surface plasmon resonance (SPR) effects.

| S-EPMC4468517 | biostudies-other

Vertically Aligned CdO-Decked α-Fe2O3 Nanorod Arrays by a Radio Frequency Sputtering Method for Enhanced Photocatalytic Applications.

Project description:Green hydrogen production is one of the most desirable sustainable goals of the United Nations. Thus, for that purpose, we developed hematite (α-Fe2O3), an n-type semiconductor, a desirable candidate for photoelectrochemical (PEC) water splitting, enabling hydrogen evolution. High recombination losses, low efficiency, and large-scale production hinder its potential. To address these issues, we have fabricated optimized bare and cadmium oxide (CdO)-decorated hematite thin film nanorod arrays using a throughput radio frequency (RF) sputtering with efficient water splitting behavior. To the best of our knowledge, no work has been done so far on the synthesis of CdO/α-Fe2O3 via RF sputtering for PEC application. Bare α-Fe2O3 samples, with a morphology of vertically aligned nanorods, were fabricated with optimized parameters such as as-deposited 70 nm of Fe, an angle of deposition of 70°, and an annealing temperature of 600 °C, which showed a photocurrent density of 0.38 mA/cm2 at 1.65 V vs reversible hydrogen electrode (RHE). Characterizations depicted that this unique morphology with high crystallinity directly enhanced the performance of hematite photoanodes. Further, deposition of 30 nm of cadmium (CdO) on the α-Fe2O3 nanorods produced a corn-like morphology with CdO nanoparticles (∼2 nm), resulting in 4-times enhancement of the PEC performance (1.2 mA/cm2 at 1.65 V vs RHE). CdO acted as a co-catalyst, responsible for satisfactory suppression of recombination and facilitating the hole transfer, directly enhancing the overall photocurrent density. This photoanode showed an extremely stable behavior over a period of 26 h when kept under constant illumination. Furthermore, the CdO-modified photoanode showed a better dye degradation (98% in 40 min) than the bare hematite (60% in 40 min), proving to be an efficient photoanode.

| S-EPMC9386802 | biostudies-literature

Investigating Gold Deposition with High-Power Impulse Magnetron Sputtering and Direct-Current Magnetron Sputtering on Polystyrene, Poly-4-vinylpyridine, and Polystyrene Sulfonic Acid.

Project description:Fabricating thin metal layers and particularly observing their formation process in situ is of fundamental interest to tailor the quality of such a layer on polymers for organic electronics. In particular, the process of high power impulse magnetron sputtering (HiPIMS) for establishing thin metal layers has sparsely been explored in situ. Hence, in this study, we investigate the growth of thin gold (Au) layers with HiPIMS and compare their growth with thin Au layers prepared by conventional direct current magnetron sputtering (dcMS). Au was chosen because it is an inert noble metal and has a high scattering length density. This allows us to track the growing nanostructures via grazing incidence scattering. In particular, Au deposition on the polymer polystyrene (PS) with the respective structural analogues poly-4-vinlypyridine (P4VP) and polystyrene sulfonic acid (PSS) is studied. Additionally, the nanostructured layers on these different polymer films are further probed by field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), X-ray reflectometry (XRR), and four-point probe measurements. We report that HiPIMS leads to smaller island-to-island distances throughout the whole sputter process. Moreover, an increased cluster density and an earlier percolation threshold are achieved compared to dcMS. Additionally, in the early stage, we observe a significant increase in coverage by HiPIMS, which is favorable for the improvement of the polymer-metal interface.

| S-EPMC11526365 | biostudies-literature

Fabrication of black aluminium thin films by magnetron sputtering.

Project description:Black aluminium thin films were prepared by direct current (DC) pulsed magnetron sputtering. The N2 concentration in the Ar-N2 mixture that was used as the deposition atmosphere was varied from 0 to 10%, and its impact on the film growth and optical properties was studied. A strong change in the film growth process was observed as a function of the N2 concentration. At a specific N2 concentration of ∼6%, the Al film growth process favoured the formation of a moth-eye-like antireflective surface. This surface morphology, which was similar to the structure of a cauliflower, is known to trap incident light, resulting in films with a very low reflectivity. A diffuse reflectivity lower than 4% was reached in the ultraviolet-visible-near infrared (UV-VIS-NIR) spectral range that corresponds to a value observed for an ultrahigh absorber. We found that for the preparation of black aluminium, the nitrogen content plays an important role in film formation and the resulting film morphology.

| S-EPMC9054304 | biostudies-literature

Light-Trapping Engineering for the Enhancements of Broadband and Spectra-Selective Photodetection by Self-Assembled Dielectric Microcavity Arrays.

Project description:Light manipulation has drawn great attention in photodetectors towards the specific applications with broadband or spectra-selective enhancement in photo-responsivity or conversion efficiency. In this work, a broadband light regulation was realized in photodetectors with the improved spectra-selective photo-responsivity by the optimally fabricated dielectric microcavity arrays (MCAs) on the top of devices. Both experimental and theoretical results reveal that the light absorption enhancement in the cavities is responsible for the improved sensitivity in the detectors, which originated from the light confinement of the whispering-gallery-mode (WGM) resonances and the subsequent photon coupling into active layer through the leaky modes of resonances. In addition, the absorption enhancements in specific wavelength regions were controllably accomplished by manipulating the resonance properties through varying the effective optical length of the cavities. Consequently, a responsivity enhancement up to 25% within the commonly used optical communication and sensing region (800 to 980 nm) was achieved in the MCA-decorated silicon positive-intrinsic-negative (PIN) devices compared with the control ones. This work well demonstrated that the leaky modes of WGM resonant dielectric cavity arrays can effectively improve the light trapping and thus responsivity in broadband or selective spectra for photodetection and will enable future exploration of their applications in other photoelectric conversion devices.

| S-EPMC6542964 | biostudies-literature

Optically Active TiO2:Er Thin Films Deposited by Magnetron Sputtering.

Project description:Titanium dioxide photoanodes for hydrogen generation suffer from a profound mismatch between the optical absorption of TiO2 and the solar spectrum. To solve the problem of low solar-to-chemical efficiency, optically active materials are proposed. In this work, TiO2 thin films containing erbium were deposited by radio frequency RF magnetron sputtering under ultrahigh vacuum conditions UHV. Morphology, structural, optical and electronic properties were studied. TiO2:Er thin films are homogenous, with uniform distribution of Er ions and high transparency over the visible VIS range of the light spectrum. However, a profound 0.4 eV blue shift of the fundamental absorption edge with respect to undoped TiO2 was observed, which can be attributed either to the size effect due to amorphization of TiO2 host or to the onset of precipitation of Er2Ti2O7 nanocrystals. Near-infrared NIR to VIS up-conversion is demonstrated upon excitation at 980 nm, while strong green photoluminescence at 525 and 550 nm occurs upon photon absorption at 488 nm.

| S-EPMC8348420 | biostudies-literature

Magnetron Sputtering Formation of Germanium Nanoparticles for Electrochemical Lithium Intercalation.

Project description:In the drive towards increased lithium based battery capacity, germanium is an attractive material due to its very high lithium storage capacity, second only to silicon. The persistent down-side is the considerable embrittlement accompanying its remarkable volume expansion of close to 300 %. A proven method to accommodate for this lattice expansion is the reduction of the size towards the nanoscale at which the fracturing is prevented by "breathing". In this work we employed a novel magnetron sputtering gas aggregation nanoparticle generator to create unprecedented layers of well-defined germanium nanoparticles with sizes below 20 nm. The electrochemical lithium intercalation was monitored by a suite of techniques under which Raman spectroscopy, which provided clear evidence of the presence of lithium inside the germanium nanoparticles. Moreover, the degree of lattice order was measured and correlated to the initial phases of the lithium-germanium alloy. This was corroborated by electron diffraction and optical absorption spectroscopy, of which the latter provided a strong dielectric change upon lithium intercalation. This study of low lithium concentrations inside layers of well-defined and very small germanium nanoparticles, forms a new avenue towards significantly increasing the lithium battery capacity.

| S-EPMC11747581 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data