Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A comparison of effects measured with isotonic and isometric recording: II. Concentration-effect curves for physiological antagonists.

ABSTRACT: If one drug, B, antagonizes another, A, by producing the opposite physiological effect, the antagonist concentration-effect curves should be affected by the recording system, which limits the range of agonist responses. With pieces of isolated guinea-pig ileum taken from adjacent parts of the same animal, one recorded isotonically, the other isometrically with the same load, the isotonic IC(50) values for (-)isoprenaline opposing carbachol or histamine were lower than the isometric values (P<0.01) but there was a significant correlation between them (P<0.01): the isotonic curves were steeper (P<0.01) and there were wider shifts in IC(50) before increasing the agonist reduced the maximum relaxation. In similar experiments with pieces of rat uterus in oestrus from the same animal, the concentration-effect curves for carbachol opposed by increasing concentrations of (-)isoprenaline or (-)adrenaline had slightly lower EC(50) values with isometric recording but there was a significant correlation (P<0.01) with isotonic values. The antagonist effect (ratio of the EC(50) relative to that for the control) was higher with isotonic recording (P<0.01 for (-)isoprenaline, P<0.025 for (-)adrenaline) and all (27) curves were steeper than the corresponding isometric curve (P<0.001). The influence of the method of recording on the results is expected from the narrower operational window and smaller upper limit to relaxation with isotonic recording. A way of obtaining measurements of IC(50) against a standard agonist effect is suggested in an Appendix.

SUBMITTER: Barlow RB

PROVIDER: S-EPMC1572875 | biostudies-other | 2001 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A comparison of effects measured with isotonic and isometric recording: I. Concentration-effect curves for agonists.

Project description:Concentration-effect curves were obtained with carbachol tested on isolated preparations of guinea-pig ileum taken from adjacent sites in the same animal, one recorded isotonically, the other isometrically: similar experiments were made with histamine as agonist and with carbachol on rat uterus (in oestrus). The position and steepness of the curves was expressed as the values of [EC(50)] and the exponent, P: with carbachol or histamine on guinea-pig ileum the curves were significantly steeper with isotonic recording (P<0.02, sign test) and displaced towards lower concentrations (P<0.005) but there were significant correlations (P<0.05) between values obtained with tissues from the same animal. The curves for carbachol on the rat uterus were very steep: with isotonic recording the exponent (often eight or more) was consistently higher than with isometric (P<0.001): there was no significant displacement but there was a significant correlation (P<0.05) between values of [EC(50)] obtained with tissues from the same animal. Although the results obtained by the two methods are different, they are correlated. These effects are to be expected because with isotonic recording there can be no change in length until the tension exceeds the load and the tissue bulk sets an upper limit to shortening: the range within which an effect can be measured (the "operational window") is smaller. The observed effects on [EC(50)] and P have been reproduced with theoretical data.

| S-EPMC1572874 | biostudies-other

A Bioequivalence Test by the Direct Comparison of Concentration-versus-Time Curves Using Local Polynomial Smoothers.

Project description:In order to test if two chemically or pharmaceutically equivalent products have the same efficacy and/or toxicity, a bioequivalence (BE) study is conducted. The 80%/125% rule is the most commonly used criteria for BE and states that BE cannot be claimed unless the 90% CIs for the ratio of selected pharmacokinetics (PK) parameters of the tested to the reference drug are within 0.8 to 1.25. Considering that estimates of these PK parameters are derived from the concentration-versus-time curves, a direct comparison between these curves motivates an alternative and more flexible approach to test BE. Here, we propose to frame the BE test in terms of an equivalence of concentration-versus-time curves which are constructed using local polynomial smoother (LPS). A metric is presented to quantify the distance between the curves and its 90% CIs are calculated via bootstrapping. Then, we applied the proposed procedures to data from an animal study and found that BE between a generic drug and its brand name cannot be concluded, which was consistent with the results by applying the 80%/125% rule. However, the proposed procedure has the advantage of testing only on a single metric, instead of all PK parameters.

| S-EPMC5165228 | biostudies-literature

The physiological concentration of ferrous iron (II) alters the inhibitory effect of hydrogen peroxide on CD45, LAR and PTP1B phosphatases.

Project description:Hydrogen peroxide is an important regulator of protein tyrosine phosphatase activity via reversible oxidation. However, the role of iron in this reaction has not been yet elucidated. Here we compare the influence of hydrogen peroxide and the ferrous iron (reagent for Fenton reaction) on the enzymatic activity of recombinant CD45, LAR, PTP1B phosphatases and cellular CD45 in Jurkat cells. The obtained results show that ferrous iron (II) is potent inhibitor of CD45, LAR and PTP1B, but the inhibitory effect is concentration dependent. We found that the higher concentrations of ferrous iron (II) increase the inactivation of CD45, LAR and PTP1B phosphatase caused by hydrogen peroxide, but the addition of the physiological concentration (500 nM) of ferrous iron (II) has even a slightly preventive effect on the phosphatase activity against hydrogen peroxide.

| S-EPMC4635172 | biostudies-literature

Handling deviating control values in concentration-response curves.

Project description:In cell biology, pharmacology and toxicology dose-response and concentration-response curves are frequently fitted to data with statistical methods. Such fits are used to derive quantitative measures (e.g. EC[Formula: see text] values) describing the relationship between the concentration of a compound or the strength of an intervention applied to cells and its effect on viability or function of these cells. Often, a reference, called negative control (or solvent control), is used to normalize the data. The negative control data sometimes deviate from the values measured for low (ineffective) test compound concentrations. In such cases, normalization of the data with respect to control values leads to biased estimates of the parameters of the concentration-response curve. Low quality estimates of effective concentrations can be the consequence. In a literature study, we found that this problem occurs in a large percentage of toxicological publications. We propose different strategies to tackle the problem, including complete omission of the controls. Data from a controlled simulation study indicate the best-suited problem solution for different data structure scenarios. This was further exemplified by a real concentration-response study. We provide the following recommendations how to handle deviating controls: (1) The log-logistic 4pLL model is a good default option. (2) When there are at least two concentrations in the no-effect range, low variances of the replicate measurements, and deviating controls, control values should be omitted before fitting the model. (3) When data are missing in the no-effect range, the Brain-Cousens model sometimes leads to better results than the default model.

| S-EPMC7603474 | biostudies-literature

Effect of Sample Sources on Heavy Metal Concentration Measured in Beta Vulgaris Organs.

Project description:AimHeavy metal concentration [mg/dL, MP] in soil and the transfer to vegetable organs may have a sampling effect. We compared the [MP] in soil and organ samples of Beta vulgaris collected in sites with socioeconomic differences potentially inducing phytotoxicity.Materials and methodsSamples of Beta vulgaris and soils (n = 4 per sample of soil and plant material) were randomly collected from two distant geographic areas (Mosquera and Sibaté, Cundinamarca, Colombia). We determined the [MP] using acid digestion of HCl : HNO3 [1 : 1]; the [MP] was obtained by atomic absorption in Varian AA-140 and Shimadzu AA-7000 equipment. A two-way ANOVA estimated the effect (partial η2) of the sampling site and metal type on the [MP] and transfer to the vegetable.ResultsIn Sibaté, the means (SD) of As_1.44 (0.18), Co_1.09 (0.51), Cr_6.21 (0.33), Ni_0.22 (0.02), and Pb_4.17 (0.87) were higher than in Mosquera (As_1.06 (0.21), Co_0.81 (0.19), Cr_3.72 (0.51), Ni_0.13 (0.04), and Pb_1.69 (0.40)) (p value <0.05). The effect of the interaction between the metal type and Beta vulgaris organs on the [MP] (0.801) in Sibaté was more meaningful than in Mosquera (0.430). Additionally, there was a strong correlation (Spearman's ρ > 0.8, p value <0.001) between [MP_soil] and [MP_plants] and between the transfer of metals to the plant and to the leaves. Discussion. The sampling location has a differential effect on the [MP] in soil and the transfer to Beta vulgaris. Given the differential effect described, the monitoring and phytoremediation strategies must be adjusted to scenarios with potentially phytotoxic conditions.

| S-EPMC9206551 | biostudies-literature

Data on temperature-time curves measured at chimney-roof penetration.

Project description:Data on temperature-time curves measured at chimney-roof penetration are reported here. The tests were performed in different configurations in order to reproduce all the possible conditions in which a chimney may operate. To do this, a chimney was installed in a corner test structure and in an axi-simmetric test structure, and in three roofs of different thickness, thermal resistance, and layers position. The space between chimney and roof was left open, sealed with metal sheets, sealed with insulating panels, and filled of insulating material respectively.

| S-EPMC6111065 | biostudies-literature

Designs for the simultaneous inference of concentration-response curves.

Project description:BackgroundAn important problem in toxicology in the context of gene expression data is the simultaneous inference of a large number of concentration-response relationships. The quality of the inference substantially depends on the choice of design of the experiments, in particular, on the set of different concentrations, at which observations are taken for the different genes under consideration. As this set has to be the same for all genes, the efficient planning of such experiments is very challenging. We address this problem by determining efficient designs for the simultaneous inference of a large number of concentration-response models. For that purpose, we both construct a D-optimality criterion for simultaneous inference and a K-means procedure which clusters the support points of the locally D-optimal designs of the individual models.ResultsWe show that a planning of experiments that addresses the simultaneous inference of a large number of concentration-response relationships yields a substantially more accurate statistical analysis. In particular, we compare the performance of the constructed designs to the ones of other commonly used designs in terms of D-efficiencies and in terms of the quality of the resulting model fits using a real data example dealing with valproic acid. For the quality comparison we perform an extensive simulation study.ConclusionsThe design maximizing the D-optimality criterion for simultaneous inference improves the inference of the different concentration-response relationships substantially. The design based on the K-means procedure also performs well, whereas a log-equidistant design, which was also included in the analysis, performs poorly in terms of the quality of the simultaneous inference. Based on our findings, the D-optimal design for simultaneous inference should be used for upcoming analyses dealing with high-dimensional gene expression data.

| S-EPMC10588042 | biostudies-literature

Mechanism Underlying Time-dependent Cross-phenomenon between Concentration-response Curves and Concentration Addition Curves: A Case Study of Sulfonamides-Erythromycin mixtures on Escherichia coli.

Project description:Previous studies have identified a phenomenon in which the concentration-response curves (CRCs) for mixtures cross the curves for concentration addition model when predicting or judging joint toxic actions. However, mechanistic investigations of this phenomenon are extremely limited. In this study, a similar phenomenon was observed when we determined the joint toxic actions of sulfonamides (SAs) and erythromycin (ERY) on Escherichia coli (E. coli), which we named the "cross-phenomenon", and it was characterized by antagonism in the low-concentration range, addition in the medium-concentration range, and synergism in the high-concentration range. The mechanistic investigation of the cross-phenomenon was as follows: SAs and ERY could form a double block to inhibit the bacterial growth by exhibiting a synergistic effect; however, the hormetic effect of SAs on E. coli led to antagonism in the low-concentration range, resulting from the stimulation of sdiA mRNA expression by SAs, which increased the expression of the efflux pump (AcrAB-TolC) to discharge ERY. Furthermore, this cross-phenomenon was observed to be a time-dependent process induced by the increase of both the concentration and extent of stimulation of sdiA mRNA with exposure time. This work explains the dose-dependent and time-dependent cross-phenomenon and provides evidence regarding the interaction between hormesis and cross-phenomenon.

| S-EPMC5028747 | biostudies-literature

Comparison of nonlinear curves and surfaces.

Project description:Estimation of nonlinear curves and surfaces has long been the focus of semiparametric and nonparametric regression analysis. What has been less studied is the comparison of nonlinear functions. In lower-dimensional situations, inference typically involves comparisons of curves and surfaces. The existing comparative procedures are subject to various limitations, and few computational tools have been made available for off-the-shelf use. To address these limitations, two modified testing procedures for nonlinear curve and surface comparisons are proposed. The proposed computational tools are implemented in an R package, with a syntax similar to that of the commonly used model fitting packages. An R Shiny application is provided with an interactive interface for analysts who do not use R. The new tests are consistent against fixed alternative hypotheses. Theoretical details are presented in an appendix. Operating characteristics of the proposed tests are assessed against the existing methods. Applications of the methods are illustrated through real data examples.

| S-EPMC9850861 | biostudies-literature

Salt concentration effects on equilibrium melting curves from DNA microarrays.

Project description:DNA microarrays find applications in an increasing number of domains where more quantitative results are required. DNA being a charged polymer, the repulsive interactions between the surface of the microarray and the targets in solution are increasing upon hybridization. Such electrostatic penalty is generally reduced by increasing the salt concentration. In this article, we present equilibrium-melting curves obtained from dedicated physicochemical experiments on DNA microarrays in order to get a better understanding of the electrostatic penalty incurred during the hybridization reaction at the surface. Various salt concentrations have been considered and deviations from the commonly used Langmuir adsorption model are experimentally quantified for the first time in agreement with theoretical predictions.

| S-EPMC2940998 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data