Microorganisms in agro-industrial waste compost
Ontology highlight
ABSTRACT:
PROVIDER: PRJEB44354 | ENA |
REPOSITORIES: ENA
Dataset's files
| Action | DRS | |||
|---|---|---|---|---|
| ERR5748290.fastq.gz | Fastqsanger.gz | |||
| ERR5748300.fastq.gz | Fastqsanger.gz | |||
| ERR5748310.fastq.gz | Fastqsanger.gz | |||
| ERR5749880.fastq.gz | Fastqsanger.gz | |||
| ERR5749890.fastq.gz | Fastqsanger.gz |
Items per page: 5 1 - 5 of 72 |
Similar Datasets
Project description:Feedstock adapted compost microbial communities from Newby Island compost facility, Milpitas, CA, USA - starting DNA
| PRJNA248223 | ENA
Project description:Feedstock adapted compost microbial communities from Newby Island compost facility, Milpitas, CA, USA - starting DNA metagenome
| PRJNA337767 | ENA
Project description:The agroindustry generates a large amount of waste. In postharvest, food losses can reach up to 50%. This waste represents a source of contamination of soil, air, and bodies of water. This represents a problem for the environment as well as for public health. However, this waste is an important source of bioactive compounds, such as phenolic compounds, terpenes, and ?-glucans, among others. Several biological activities have been attributed to these compounds; for example, antioxidant, antimicrobial, gut microbiota, and immune system modulators. These properties have been associated with improvements in health. Recently, the approach of using these bioactive compounds as food additives for aquaculture have been addressed, where it is sought that organisms, in addition to growing, preserve their health and become disease resistant. The exploitation of agro-industrial waste as a source of bioactive compounds for aquaculture has a triple objective-to provide added value to production chains, reduce pollution, and improve the well-being of organisms through nutrition. However, to make use of the waste, it is necessary to revalue them, mainly by determining their biological effects in aquaculture organisms. The composition of bioactive compounds of agro-industrial wastes, their biological properties, and their application in aquaculture will be addressed here.
| S-EPMC7404778 | biostudies-literature
Project description:On a worldwide scale, food demand is increasing as a consequence of global population growth. This makes companies push their food supply chains' limits with a consequent increase in generation of large amounts of untreated waste that are considered of no value to them. Biorefinery technologies offer a suitable alternative for obtaining high-value products by using unconventional raw materials, such as agro-industrial waste. Currently, most biorefineries aim to take advantage of specific residues (by either chemical, biotechnological, or physical treatments) provided by agro-industry in order to develop high-value products for either in-house use or for sale purposes. This article reviews the currently explored possibilities to apply biorefinery-known processes to banana agro-industrial waste in order to generate high-value products out of this residual biomass source. Firstly, the Central and Latin American context regarding biomass and banana residues is presented, followed by advantages of using banana residues as raw materials for the production of distinct biofuels, nanocellulose fibers, different bioplastics, and other high-value products Lastly, additional uses of banana biomass residues are presented, including energy generation and water treatment.
| S-EPMC7504234 | biostudies-literature
Project description:The growing demand for cellulosic pulp presents an opportunity to explore alternatives to this material, focusing on utilizing agro-industrial residues. Mango's tegument is a rich source of cellulose, making it a valuable raw material for manufacturing single-use articles or blends with biopolymers. In this sense, employing conventional alkaline and acid chemical treatments, the mango's tegument was treated to obtain cellulosic pulp. The teguments were subjected to treatment with alkaline solutions (2% and 4% NaOH w/v) at 80 °C for 1 or 2 h or with an acetic acid solution (1:1 or 1:2 CH3COOH:H2O2) at 60-70 °C for 1 or 2 h. After treatment, an evaluation was conducted to assess the yield, color, chemical analysis, and structural, thermal, and morphological properties. The alkali treatments produced cellulosic pulps with a light color with 37-42% yield and reduced hemicellulose content. The acid treatments produced orange-brown cellulosic pulp with 47-48% yield and higher hemicellulose content. The acid pulps were thermally more stable (maximum decomposition at 348-357 °C) than the alkali pulps (maximum decomposition at 316-321 °C). The crystallinity index demonstrated that both treatments increased the crystallinity of the cellulose pulps compared with the untreated tegument. The thermal stability of cellulosic pulp at the processing temperatures of disposable tableware (50-120 °C) revealed that plates, bowls, trays, and cups could be produced. Another potential application is as a component of blends with biopolymers to make straws or rigid food packaging (trays) with reinforced structures.
| S-EPMC10421418 | biostudies-literature
Project description:This study is aimed at the analysis of the pyrolysis kinetics of Nanche stone BSC (Byrsonima crassifolia) as an agro-industrial waste using non-isothermal thermogravimetric experiments by determination of triplet kinetics; apparent activation energy, pre-exponential factor, and reaction model, as well as thermodynamic parameters to gather the required fundamental information for the design, construction, and operation of a pilot-scale reactor for the pyrolysis this lignocellulosic residue. Results indicate a biomass of low moisture and ash content and a high volatile matter content (≥70%), making BCS a potential candidate for obtaining various bioenergy products. Average apparent activation energies obtained from different methods (KAS, FWO and SK) were consistent in value (~123.8 kJ/mol). The pre-exponential factor from the Kissinger method ranged from 105 to 1014 min-1 for the highest pyrolytic activity stage, indicating a high-temperature reactive system. The thermodynamic parameters revealed a small difference between EA and ∆H (5.2 kJ/mol), which favors the pyrolysis reaction and indicates the feasibility of the energetic process. According to the analysis of the reaction models (master plot method), the pyrolytic degradation was dominated by a decreasing reaction order as a function of the degree of conversion. Moreover, BCS has a relatively high calorific value (14.9 MJ/kg) and a relatively low average apparent activation energy (122.7 kJ/mol) from the Starink method, which makes this biomass very suitable to be exploited for value-added energy production.
| S-EPMC9862415 | biostudies-literature
Project description:Blueberry pruning waste (BPw), sourced as residues from agroforestry operations in Chile, was used to produce added-value products, including platform chemicals and materials. BPw fractionation was implemented using biobased solvents (γ-valerolactone, GVL) and pyrolysis (500 °C), yielding solid fractions that are rich in phenols and antioxidants. The liquid fraction was found to be enriched in sugars, acids, and amides. Alongside, filaments and 3D-printed meshes were produced via wet spinning and Direct-Ink-Writing (DIW), respectively. For the latter purpose, BPw was dissolved in an ionic liquid, 1-ethyl-3-methylimidazolium acetate ([emim][OAc]), and regenerated into lignocellulose filaments with highly aligned nanofibrils (wide-angle X-ray scattering) that simultaneously showed extensibility (wet strain as high as 39%). BPw-derived lignocellulose filaments showed a tenacity (up to 2.3 cN dtex-1) that is comparable to that of rayon fibers and showed low light reflectance (R ES factor <3%). Meanwhile, DIW of the respective gels led to meshes with up to 60% wet stretchability. The LCF and meshes were demonstrated to have reliable performance in marine environments. As a demonstration, we show the prospects of replacing plastic cords and other materials used to restore coral reefs on the coast of Mexico.
| S-EPMC9086861 | biostudies-literature
Project description:Antimicrobial resistant (AMR) infections are a leading health threat globally. Previous literature has underscored the farm-to-fork continuum as a potential focal point for the emergence and spread of AMR. In the present study, date (Phoenix dactylifera L.) seed oil was investigated for its chemical composition and antimicrobial activity against common foodborne pathogens including Escherichia coli O157:H7, Salmonella enteritidis, Salmonella typhimurium, Listeria monocytogenes, and Staphylococcus aureus in vitro, and in ultra-high-temperature (UHT) milk as a food model at storage temperatures of 37 °C (24 h) and 10 °C (7 days). GC-MS analysis of the seed oil revealed 20 compounds, with octadecane (52.2-55.4%) as the major constituent, and the fatty acid analysis revealed 17 fatty acids, with oleic acid (42.3-43.1%) as the main constituent, followed by lauric acid (19.8-20.3%). The antimicrobial activity of date seed oil was determined using the microdilution method. A significant inhibition against gram-negative bacteria was noted in microbiological media and UHT milk, with a log reduction ranging from 4.3 to 6.7 (at 37 °C/24 h) and 5.7 to 7.2 (at 10 °C/7 days), respectively, at oil concentrations ranging between 10 and 15 µl/ml. The oil showed a similar significant inhibitory effect against St. aureus in the microbiological media (2.0-6.0 log reduction), whereas the inhibitory effect against L. monocytogenes was not statistically significant, with a maximum log reduction of 0.64 achieved at a concentration of 10 µl/ml. AFM imaging of the bacteria showed that oil treatment led to morphological changes in the bacteria including the formation of distorted shapes, surface blebs, indentations, stiffness, and swelling. Present findings suggest that date seed oil can be a promising by-product with potential antimicrobial activity and a food preservative.
| S-EPMC10564903 | biostudies-literature
Project description:The aim of this study was to utilize cassava pulp to prepare biocomposites comprising microcrystalline cellulose from cassava pulp (CP-MCC) as a filler and polyhydroxybutyrate (PHB) synthesized in-house by Cupriavidus necator strain A-04. The CP-MCC was extracted from fresh cassava pulp. Next, the CP-MCC surface was modified with butyryl chloride (esterified to CP-MCC butyrate) to improve dissolution and compatibility with the PHB. FTIR results confirmed that the esterified CP-MCC butyrate had aliphatic chains replacing the hydroxyl groups; this substitution increased the solubilities in acetone, chloroform, and tetrahydrofuran. Biocomposite films were prepared by varying the composition of esterified CP-MCC butyrate as a filler in the PHB matrix at 0, 5, 10, 15, 20 and 100 wt%. The results for the 95:5 and 90:10 CP-MCC butyrate biocomposite films showed that esterification led to improvements in the thermal properties and increased tensile strengths and elongations at break. All prepared biocomposite films maintained full biodegradability.
| S-EPMC10664873 | biostudies-literature
Project description:This work aimed to evaluate the growth of two species of microgreens (mizuna and pak choi), using agro-industrial compost as growing media in two different mixes versus one hundred percent peat, under two different LED illumination spectra (LED 1 and LED 2) in a 14 h photoperiod. The experiment was carried-out for two times. Biomass yield, glucosinolates, and phenolic compounds, and nitrate (NO3-) content were analysed in leaf tissues. In both species, the highest fresh and dry biomass production was in compost:peat (50:50%) and LED 2 (Blue/Red/Far Red). In general, compost had a greater influence on nitrate content than light, but in the microgreen pak choi, the anthocyanin content was inhibited by the compost treatment. In the other hand both LED illumination had a positive effect on mizuna for glucosinolates and anthocyanins, and LED 2 also showed a positive effect on pak choi for anthocyanin. Therefore, the use of agri-food compost: peat (50:50%) with LED 2 (blue/red) lighting treatment to obtain microgreens in indoor crops is a plausible technology that provides nutritionally and phytochemically rich crops.
| S-EPMC10901005 | biostudies-literature