New insights into SREB orphan receptor roles in the ovary, using comparative transcriptomics across 3 fishes
Ontology highlight
ABSTRACT:
ORGANISM(S): Fundulus heteroclitus
PROVIDER: GSE313040 | GEO | 2026/08/17
REPOSITORIES: GEO
Similar Datasets
Project description:Zebrafish ovary in vitro assays were completed using methods modified from Rajeswari et al., 2020. Briefly, female D. rerio (n = 14) were euthanized in 300 mg/L buffered MS-222 (Syncaine®, tricaine methanesulfonate, Syndel, Ferndale, WA, USA), weighed, and measured (total length (mm), TL). Zebrafish ovaries from each fish were partitioned into 5 sections of approximately equal size. Each of four of these sections were immersed into an assigned well within a 24-well plate containing 990 μl of culture media (90% Leibovitz’s L-15 medium [Sigma Cat# L1518], 1% Penicillin-Streptomycin [Gibco™ Cat# 15070-063], 0.5% bovine serum albumin [Sigma Cat# 81053N]), with either a DMSO control or one of 3 potential agonist treatments, 8535 (5 μM), PT-91 (5 μM), or PNX-20 (100 nM). Agonists were dissolved in DMSO and added to their respective wells in 10μl aliquots to achieve desired final concentrations in a final volume of 1ml in each well. The fifth section of ovary was photographed on a Sedgewick rafter cell with a Jenoptik ProgRes® C5 microscope camera to characterize egg stages for each fish. Four plates containing n=3-4 replicates per treatment were incubated for 6 hours at 28 ℃, each plate completed on different days to replicate the assay temporally. After incubation, ovarian tissues were snap frozen in RNAlater™ (Invitrogen Cat# AM7020) for transcriptome analysis and culture media were stored in glass tubes at -80°C for further steroid quantification analysis via liquid chromatography tandem mass spectrometry (LC-MS/MS).
2025-10-31 | GSE291115 | GEO
Project description:Green spotted pufferfish ovary in vitro assays were completed using methods modified from Rajeswari et al., 2020. Briefly, female D. nigroviridis (n = 14) were euthanized in 300 mg/L buffered MS-222 (Syncaine®, tricaine methanesulfonate, Syndel, Ferndale, WA, USA), weighed, and measured (total length (mm), TL). Green spotted pufferfish ovaries from each fish were partitioned into 5 sections of approximately equal size. Each of four of these sections were immersed into an assigned well within a 24-well plate containing 990 μl of culture media (90% Leibovitz’s L-15 medium [Sigma Cat# L1518], 1% Penicillin-Streptomycin [Gibco™ Cat# 15070-063], 0.5% bovine serum albumin [Sigma Cat# 81053N]), with either a DMSO control or one of 3 potential agonist treatments, 8535 (5 μM), PT-91 (5 μM), or PNX-20 (100 nM). Agonists were dissolved in DMSO and added to their respective wells in 10μl aliquots to achieve desired final concentrations in a final volume of 1ml in each well. The fifth section of ovary was photographed on a Sedgewick rafter cell with a Jenoptik ProgRes® C5 microscope camera to characterize egg stages for each fish. Four plates containing n=4-5 replicates per treatment were incubated for 6 hours at 28 ℃, each plate completed on different days to replicate the assay temporally. After incubation, ovarian tissues were snap frozen in RNAlater™ (Invitrogen Cat# AM7020) for transcriptome analysis and culture media were stored in glass tubes at -80°C for further steroid quantification analysis via liquid chromatography tandem mass spectrometry (LC-MS/MS).
2026-08-17 | GSE299271 | GEO
Project description:MSI-tumor organoids were previously stimulated with 200 ng/mL IFNγ for 24 hours. Then, organoids were dissociated into single cells using TrypLE express and resuspended in conditioned media. Cells were seeded in a 24-well plate and incubated for 24 hours at 37°C. After incubation, tumor cells were collected, washed in PBS and processed for membrane protein extraction using the Mem-PER™ Plus Membrane Protein Extraction Kit (Thermo Scientific, cat. no. 89842), following the manufacturer’s instructions. Membrane proteome was quantified using the Pierce™ BCA Protein Assay Kits (Thermo Scientific, cat. no. 23225). Then, the membrane protein fraction was digested for LCMSMS analysis.
2026-05-07 | PXD066343 | Pride
Project description:Sample preparation was conducted using an adaptation of our SimPLIT workflow10. Four cell pellets corresponding to four different colorectal cancer cell lines were lysed in a buffer containing 1% sodium deoxycholate (SDC, Merck, Cat. No. 30970), 100 mM triethylammonium bicarbonate (TEAB, Merck, Cat. No. T7408), 10% isopropanol and 50 mM NaCl, freshly supplemented with 5 mM TCEP (Thermo, Bond-breaker Cat. No 77720), 10 mM iodoacetamide (IAA, Merck, Cat. No. I1149), universal nuclease 1:2000 vol/vol (Pierce, Cat. No. 88700) and Halt protease and phosphatase inhibitor cocktail (Thermo, Cat. No. 78442, 100X) with 5 min of bath sonication. Protein concentration was measured with the Quick Start Bradford protein assay (Bio-Rad, Cat. No. 5000205). Aliquots of 30 μg of total protein from each cell line were transferred in a 96-well plate according to the 58-plex design. An E. coli protein extract (Bio-Rad, Cat. No. 1632110) was added at 1 μg or 0.5 μg across the human cell lysates. The plate was dried and the samples for the arginine-specific cleavage set (TrypR) were reconstituted in 25 μL (TMT11 subset) or 12.5 μL (TMT18 subset) of 100 mM TEAB buffer followed by the addition of 10 μL TMT11 (stock 20 μg/μL, Thermo Fischer Scientific, Cat. No. A34808) or 5 μL TMTpro18 (stock 25 μg/μL, Thermo Fischer Scientific, Cat. No. A52045), and 1h reaction at room temperature for protein-level TMT labelling. The TMT labelled samples were SpeedVac dried, and all samples (labelled and unlabelled) were reconstituted in 20 μL of 100 mM TEAB buffer. Proteins were digested overnight at room temperature by the addition of 2 μL LysC (Thermo Fischer Scientific, Cat. No. 90307) or Trypsin (Thermo Fischer Scientific, Cat. No. 90059) stock solution of 500 ng/μL in 0.1% formic acid (final enzyme 50 ng/μL, 1:30) for the LysC and TrypR sets respectively. The peptides were then fully labelled by another addition of 10 μL TMT11 or 5 μL TMTpro18. The reaction was quenched after 1h with the addition of 2 μL 5% hydroxylamine solution and premix samples were prepared by pooling 0.5 μL from each sample into 100 μL of 0.1% TFA for each sub-plex separately. In each premix, SDC was precipitated with addition of formic acid at 2% and centrifugation at 20,000 × g for 5 minutes. Supernatants were transferred into clean vials for LC-MS analysis. Following evaluation of the premix runs, samples were pooled into four sub-plexes, diluted with 100 μL of HPLC water, heated at 95 °C for 5 min, cooled down and heated for another 5 minutes. Lastly, each pool was acidified with formic acid at 2%, the precipitated SDC was removed by centrifugation and supernatants were SpeedVac dried.High-pH Reversed-phase Peptide FractionationAll four sub-plexes were pooled in 100 μL of 0.1% (v/v) ammonium hydroxide and the final peptide pool was fractionated with high pH Reversed-Phase chromatography using the XBridge C18 column (2.1 × 150 mm, 3.5 μm, Waters) on an UltiMate 3000 HPLC system over a 1% gradient in 35 min. Mobile phase A was 0.1% (v/v) ammonium hydroxide and mobile phase B was 0.1% ammonium hydroxide (v/v) in acetonitrile. Fractions were collected every 30 sec and eventually pooled into 45 samples for LC-MS analysis.
2026-01-30 | PXD070352 | Pride
Project description:We employed UPLC-MS/MS with iTRAQ 8-plex labeling to quantitatively analyze the supernatant produced by two Chinese hamster ovary (CHO) cell lines (CHO K1SV and CHO CAT-S). In each case, the supernatant from the host and three transfected clones were analyzed at days 5, 7, and 10 of culture. A total of eight iTRAQ 8-plex experiments were performed.
2016-07-20 | PXD003462 | Pride
Project description:The aim of this study is to analize the genes that are up or down-regulated in response to sprouting promoting effectors such as GAs and light, in order to elucidate the signalling cascades triggered during this process. Half sections of certified pathogen tested Spunta tubers were put into sterile MS-agar (0.7%) containing flasks at 16„aC and subjected to different treatments: Dark controls: Tuber sections were incubated for 10 or 35 days in complete darkness. Light control: Tuber sections were incubated for 10 days under continuous light conditions. Treatments performed in complete darkness during 35 days: a) GA treatment: 5 uM gibberellic acid (C19H22O6) = GA3 (Sigma) b) Sucrose treatment: 1% sucrose c) GA & sucrose treatment: 5 uM GA3 (Sigma) + 1% sucrose Treatments performed in light (10 days)d) GA treatment : 5 uM GA3 (Sigma). Three independent biological replicates of each condition (3 controls and 4 treatments) wereperformed. At the moment of harvest (10 or 35 days) sprout length was measured and photographs of the different samples were taken. Sprouts were excised and frozen in liquid Nitrogen. Total RNA was obtained using the Trizol reagent (Invitrogen) according to the manufacturer¡¦s instructions. RNAs were quantified by OD: 260/280 and checked in agarose gels. Keywords: Loop design
2008-02-13 | GSE10492 | GEO
Project description:affy_ath_2012_05 - affy_ath_2012_05 - The main objective is to determinate the influence of Ubiquitin-Like Proteases in plant transcriptional modulation. The experiment will also allow us to find what transcriptional cues are particularly affected in the mutants relatively to wild-type.-Seeds were stratified for 3 days at 4ºC in the dark. Afterwards, seeds were surface sterilized, sown onto MS media and grown at 23ºC, with 100 µE light condition, in long days (16h L/8h D). Each MS plate was dived in four, corresponding to a genotype (Col, AB, SIZ1 or SAB), and 10 seeds were sown per genotype. After 10 days, seedlings were collected and frozen in liquid nitrogen. Each replicate was made of ~40 seedlings coming from 4 different MS plates. Frozen plant material was grounded in an eppendorf tube using a mini pestle. RNA was extracted using RNeasy Plant Mini kit (QIAGEN cat.74904), following the manufacturer instructions (QIAGEN, Hilden, Germany). The RNA samples were DNase treated (Recombinant DNase I, Takara Biotechnology, Dalian, China) and subsequently cleaned by column using RNeasy Plant Mini kit (QIAGEN, Hilden, Germany).
2013-09-01 | GSE43883 | GEO
Project description:Purpose: To compare transcriptomic changes after guvermectin (GV), indole-3-acetic acid (IAA), trans-zeatin (ZT), epibrassinolide (eBL) and gibberellin acid 3 (GA3) treatments in Arabidopsis. Method: 7-day-old MS liquid cultivated Col-0 seedlings were treated by 10 μM GV, 1 μM IAA, 1 μM ZT, 1 μM eBL or 1 μM GA3. Chemicals were added into MS liquid respectively and whole seedling samples were collected after treatment for 5, 30, 180 minutes. In total, we got control group and 5 treatment groups. Three biological replicates were performed. Results: In total, 54 samples were used for RNA sequencing analysis. At least 6 G clean bases were generated for each sample. Comparative analysis identified differences between GV and other plant growth regulators in transcriptional level.
2024-12-03 | GSE190152 | GEO
Project description:2-cell (E1.5) stage embryos were cultured in normal KSOM+AA conditions until E3.5 +2h and thereafter 100 embryos each were moved to control or p38-MAPKi conditions and cultured for another 7 hours (E3.5 +9h). The embryos were then washed through pre-warmed (37˚C) Hank’s balanced salt solution (HBSS, Sigma-Aldrich; Cat. No. H9269) and lysed by moving to a 1.5ml centrifuge tube containing about 15µl of SDT-lysis buffer (4% (w/v) SDS, 100 mM Tris-HCl pH 7.6, 0.1 M DTT). Cell lysis was performed by incubating the tubes in a 95˚C thermoblock for 12 minutes, brief centrifugation at 750 rpm, cooling to room temperature and storage at -80˚C. Individual protein solutions were processed by filter-aided sample preparation (FASP) method with some modifications (see the associated publication for more details). Resulting peptides were cleaned by liquid-liquid extraction (3 iterations) using water saturated ethyl acetate. 1/10th of the FASP eluate was taken out for direct LC-MS measurements, evaporated completely in SpeedVac concentrator (Thermo Fisher Scientific). Peptides were further transferred into LC-MS vials using 50μL of 2.5% formic acid (FA) in 50% acetonitrile (ACN) and 100μL of pure ACN and with addition of polyethylene glycol (final concentration 0.001%) and concentrated in a SpeedVac concentrator. Phosphopeptides were enriched from the remaining 9/10th of the cleaned FASP eluate after complete solvent evaporation (SpeedVac concentrator) using High-Select™ TiO2 Phosphopeptide Enrichment Kit (Thermo Fisher Scientific) according to manufacturer protocol. Phosphopeptide standards (0.1 pmol of MS PhosphoMix 1, 2, 3 Light; Sigma-Aldrich, St. Louis, Missouri, USA) was added to suspended sample in binding/equilibration buffer. Flow-through fraction was dried and used for second enrichment step using High-Select™ Fe-NTA Phosphopeptide Enrichment Kit (Thermo Fisher Scientific, Waltham, Massachusetts, USA) according to manufacturer protocol. Resulting phosphopeptides were extracted into LC-MS vials by 2.5% FA in 50% ACN and 100% ACN with addition of polyethylene glycol (final concentration 0.001%) and concentrated in a SpeedVac concentrator). LC-MS/MS analyses of all peptide mixtures (2 peptide solutions for each sample – 1) not enriched; 2) enriched on phosphopeptides using TiO2 enrichment kit) were done using RSLCnano system connected to Orbitrap Fusion Lumos mass spectrometer (Thermo Fisher Scientific). Prior to LC separation, tryptic digests were online concentrated and desalted using trapping column (100 μm × 30 mm, column compartment temperature of 40˚C) filled with 3.5-μm X-Bridge BEH 130 C18 sorbent (Waters). After washing of trapping column with 0.1% FA, the peptides were eluted (flow rate - 300nl/min) from the trapping column onto an analytical column (Acclaim Pepmap100 C18, 3 µm particles, 75 μm × 500 mm; column compartment temperature of 40˚C, Thermo Fisher Scientific) by using 50 or 100 minutes long nonlinear gradient program (1-56% of mobile phase B; mobile phase A: 0.1% FA in water; mobile phase B: 0.1% FA in 80% ACN) for analysis of phosphopeptide enriched fractions or not enriched peptide mixtures, respectively. Equilibration of the trapping column and the analytical column was done prior to sample injection to sample loop. The analytical column outlet was directly connected to the Digital PicoView 550 (New Objective) ion source with sheath gas option and SilicaTip emitter (New Objective; FS360-20-15-N-20-C12) utilization. ABIRD (ESI Source Solutions) was installed. MS data were acquired in a data-dependent strategy with cycle time for 3 seconds and with survey scan (350-2000 m/z). The resolution of the survey scan was 60000 (200 m/z) with a target value of 4×105 ions and maximum injection time of 50ms. HCD MS/MS (30% relative fragmentation energy, normal mass range) spectra were acquired with a target value of 5.0x104. The MS/MS spectra were recorded in Orbitrap at resolving power of 30,000 or 15,000 (200 m/z) and the maximum injection time for MS/MS was 500 or 22 ms for analysis of phosphopeptides enriched fraction or non-enriched peptide mixture, respectively. Dynamic exclusion was enabled for 60 seconds after one MS/MS spectra acquisition. The isolation window for MS/MS fragmentation was set to 1.6 m/z.
2021-07-12 | PXD025754 | Pride
Project description:Human primary macrophages were infected with influenza A virus (H3N2/Udorn strain, HA 256) for 6 hrs or left untreated. Cells were collected and lysed with HEPES lysis buffer (50 mM HEPES, 150 mM NaCl, 1 mM EDTA, 1 % NP-40, pH 7.4) including protease and phosphatase inhibitor cocktails. The cell lysates were centrifuged and the supernatant was collected and the protein content was measured with Bio-Rad DC™ protein assay (Bio-Rad). The proteins were reduced, alkylated, and enzymatically digested in-solution with trypsin. The digestion was stopped by adding FA (final c = 1 %). The samples were centrifuged 9168 x g for 10 min and desalted with Sep-Pak Vac RP C18 cartridges (Waters, MA, USA), following fractionation by strong cation exchange chromatography (SCX). The peptides were separated on a 200 x 4.6 mm, 5 μm, 200 Å PolySULFOETHYL A™ column (PolyLC, USA). The fractions were vacuum centrifuged and desalted as before, following phosphopeptide-enrichment with PHOS-Select™ Iron Affinity Gel (Sigma Aldrich, MO, USA). LC-MS/MS was performed with a Q Exactive hybrid quadrupole-orbitrap tandem mass spectrometer coupled to an EASY-nLC 1000 nanoflow liquid chromatograph (Thermo Fisher Scientific). A 100 μm x 3 cm trap column and a 75 μm x 15 cm analytical column were in-house packed with Magic C18AQ resin (200 Å, 5 μm; Michrom Bioresources). The mobile phases were 2% acetonitrile, 0.2% formic acid (A) and 95% acetonitrile, 0.2% formic acid (B). LC gradient elution condition was 2% B (0 min), 20% B (70 min), 40% B (100 min), and then 100% B (105-110 min), with a flow rate of 300 nl/min. Data dependent acquisition was performed in positive ion mode. MS spectra were acquired from m/z 300 to m/z 2000 at a resolution of 70,000 at m/z 200 with a target value of 1,000,000 and maximum injection time of 120 ms. The 10 most abundant precursor ions of which charge states were 2+ or higher were selected for higher energy collisional dissociation (HCD) with an isolation window of 2 and normalized collision energy of 30. MS/MS spectra were acquired at a resolution of 17,500 at m/z 200 with a target value of 50,000, maximum injection time of 250 ms, and the lowest mass fixed at m/z 100. Dynamic exclusion duration was 30 s.
2016-08-08 | PXD001620 | Pride